Schwinn MTB Project. Some help needed...
#1
Junior Member
Thread Starter
Join Date: Apr 2020
Location: Ridgewood, NJ
Posts: 12
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 5 Times
in
4 Posts
Schwinn MTB Project. Some help needed...
I just picked up what I think is a 1980's era Schwinn mountain bike for...well, $0, it was on the curb. You can see why, it was severely disrespected! I'm planning on completely stripping it down and turning it into a 1x cyclocross bike. But this is the first time I'm actually diving into surgery on a bicycle; have been a rider for a while but just little repairs here and there are the extent of my mechanic knowledge, so I'm going to need a little help. Goes without saying that during this quarantine I'm going a little mad and need a deep project to occupy myself with.
Now the first thing is, can anyone help me definitively identify this bike? It has no markings or badges of any kind. The serial number is SA8700008, which I have not found in any database, and seems to correspond to a 1980s Schwinn Sierra, but some things throw me off, so I can't say for sure.
Here are the first things I plan to do: replace the handlebar/stem setup, to add drop bars. Does anyone know the sizing on these 80s Schwinns? I've not experienced these "all in one" style handlebars. Would a 22.2 stem fit here? I can do quill or threadless, I don't think I have a preference here, just need to figure out rise and angle (for the record I am 6'1")
Second, I want to replace the crankset. However I've never removed or even tinkered with this kind of crankset, how would I remove it, and are modern cranksets even compatible with it? Once we get these details sorted I can start buying some parts and we'll really start dancing as each part added will link the next, and so on. So let's get started! Here are some pics of the poor boy...
Now the first thing is, can anyone help me definitively identify this bike? It has no markings or badges of any kind. The serial number is SA8700008, which I have not found in any database, and seems to correspond to a 1980s Schwinn Sierra, but some things throw me off, so I can't say for sure.
Here are the first things I plan to do: replace the handlebar/stem setup, to add drop bars. Does anyone know the sizing on these 80s Schwinns? I've not experienced these "all in one" style handlebars. Would a 22.2 stem fit here? I can do quill or threadless, I don't think I have a preference here, just need to figure out rise and angle (for the record I am 6'1")
Second, I want to replace the crankset. However I've never removed or even tinkered with this kind of crankset, how would I remove it, and are modern cranksets even compatible with it? Once we get these details sorted I can start buying some parts and we'll really start dancing as each part added will link the next, and so on. So let's get started! Here are some pics of the poor boy...
#2
Senior Member
Join Date: Feb 2017
Location: Concord, NC
Posts: 701
Bikes: 1984 Bianchi Tipo Corsa, 1985 Cannondale SM600 (24/26)
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 235 Post(s)
Liked 349 Times
in
190 Posts
I might be wrong, but I don't think Schwinn MTBs had one piece cranks in the eighties. That might make crankset choices a little limited although I do think there were (still are ?) Conversion BB kits.
Likes For Bianchi84:
#3
Senior Member
Join Date: Dec 2005
Posts: 17,158
Mentioned: 481 Post(s)
Tagged: 0 Thread(s)
Quoted: 3810 Post(s)
Liked 6,698 Times
in
2,611 Posts
The good news: That’s a cool lugged fork. Interesting camo paint job!
The bad news: That bike is radically too small for you at 6’1” plus it’s quite low-end and not worth sinking time and resources into unless you’ll do the minimum and give it away to a neighborhood kid. Keep looking!
The bad news: That bike is radically too small for you at 6’1” plus it’s quite low-end and not worth sinking time and resources into unless you’ll do the minimum and give it away to a neighborhood kid. Keep looking!
#4
Full Member
The good news: That’s a cool lugged fork. Interesting camo paint job!
The bad news: That bike is radically too small for you at 6’1” plus it’s quite low-end and not worth sinking time and resources into unless you’ll do the minimum and give it away to a neighborhood kid. Keep looking!
The bad news: That bike is radically too small for you at 6’1” plus it’s quite low-end and not worth sinking time and resources into unless you’ll do the minimum and give it away to a neighborhood kid. Keep looking!
#5
Junior Member
Thread Starter
Join Date: Apr 2020
Location: Ridgewood, NJ
Posts: 12
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 5 Times
in
4 Posts
The good news: That’s a cool lugged fork. Interesting camo paint job!
The bad news: That bike is radically too small for you at 6’1” plus it’s quite low-end and not worth sinking time and resources into unless you’ll do the minimum and give it away to a neighborhood kid. Keep looking!
The bad news: That bike is radically too small for you at 6’1” plus it’s quite low-end and not worth sinking time and resources into unless you’ll do the minimum and give it away to a neighborhood kid. Keep looking!
Likes For tincup:
#6
Senior Member
Join Date: Dec 2005
Posts: 17,158
Mentioned: 481 Post(s)
Tagged: 0 Thread(s)
Quoted: 3810 Post(s)
Liked 6,698 Times
in
2,611 Posts
This one is bigger and cheap, but probably still on the small side:
https://newjersey.craigslist.org/bik...081293468.html
Or offer this guy half of his asking price:
https://newjersey.craigslist.org/bik...087446917.html
https://newjersey.craigslist.org/bik...081293468.html
Or offer this guy half of his asking price:
https://newjersey.craigslist.org/bik...087446917.html
#7
Bianchi Goddess
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 27,858
Bikes: Too many to list here check my signature.
Mentioned: 192 Post(s)
Tagged: 2 Thread(s)
Quoted: 2930 Post(s)
Liked 2,923 Times
in
1,491 Posts
Personally I'd put it back. The lack of a rear derailleur hanger points to this being a HiTensil frame.
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
Likes For kjaioqhbkqb:
#9
feros ferio
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,798
Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1393 Post(s)
Liked 1,325 Times
in
837 Posts
To paraphrase Paul Hogan's Crocodile Dundee character, "That's not a Schwinn. That's a Schwinn!"
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069