Bike stand for indoor
#1
Senior Member
Thread Starter
Bike stand for indoor
I have half a dozen bikes in my basement and need some to hold them up. Leaning on shelves of paint or each other doesn't cut it. Plus, I like to admire them!
Any inexpensive ideas? Plans or examples of some you have made yourself? (Amazon offerings are too expensive for the simple items that they are)
Let's see how you organize your fleet.
Any inexpensive ideas? Plans or examples of some you have made yourself? (Amazon offerings are too expensive for the simple items that they are)
Let's see how you organize your fleet.
#2
On Your Left
Join Date: Nov 2011
Location: Long Island, New York, USA
Posts: 8,373
Bikes: Trek Emonda SLR, Sram eTap, Zipp 303
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 3004 Post(s)
Liked 2,433 Times
in
1,187 Posts
You can buy some 1x2 and make a rack.
Like in a garage, if you have exposed floor joists, you can get some hooks and hang them.
Like in a garage, if you have exposed floor joists, you can get some hooks and hang them.
#3
Senior Member
Thread Starter
I've thought of making a rack, just too lazy to figure it out. Might be a good Covid project.
#4
On Your Left
Join Date: Nov 2011
Location: Long Island, New York, USA
Posts: 8,373
Bikes: Trek Emonda SLR, Sram eTap, Zipp 303
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 3004 Post(s)
Liked 2,433 Times
in
1,187 Posts
It's gonna be the cheapest and you can make it exactly to fit your needs.
6 bikes displayed will take a lot of room. Depending on the ceiling height you can wall mount them one about the other so 3x2.
Here's a nice idea that took a few seconds on Google.
6 bikes displayed will take a lot of room. Depending on the ceiling height you can wall mount them one about the other so 3x2.
Here's a nice idea that took a few seconds on Google.
Likes For GlennR:
#5
Senior Member
I have no pics, but my previous lbs had a 2x4 stud screwed to the wall about head high or better. Screw a bike holding "J" hook horizontally (perpendicular to the wall) into the stud, about 2 feet apart, depending. Put the bike wheels against the wall like you're going to ride to the ceiling (or floor), and hook the top wheel rim on the J hook, which should be oriented to 3 or 9 o'clock. Gravity holds it in place. You can alternate front/rear hanging, from bike to bike. Very inexpensive. Decorate with Christmas lights. Done.
#6
Senior Member
https://www.google.com/search?client...ruck+bike+rack
You can play around with that and find different options and instructions. Easy not much skill required.
You can play around with that and find different options and instructions. Easy not much skill required.
#7
-------
Join Date: Jul 2020
Location: Tejas
Posts: 12,790
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 9648 Post(s)
Liked 6,363 Times
in
3,503 Posts
I have Gladiator gear track on my wall, and hang our bikes using the Gladiator vertical bike hook. You can get it at Lowe's.
It doesn't hurt carbon bikes, either.
It doesn't hurt carbon bikes, either.
Last edited by Mojo31; 09-18-20 at 08:21 AM.
#8
High Plains Luddite
I really like the look of this when they're still like that, but I wonder if taking down or hanging up a bike - especially one of the middle three - would cause them all to swing and bang together and become annoying time after time.
I'd like to do something similar because we have bikes for a family of four on the floor in the garage this time of year (when they're not hung from the ceiling in the winter) and it can be a tight squeeze with both cars in the garage.
I'd like to do something similar because we have bikes for a family of four on the floor in the garage this time of year (when they're not hung from the ceiling in the winter) and it can be a tight squeeze with both cars in the garage.
#9
Senior Member
Join Date: Jan 2019
Location: Alberta, Canada
Posts: 190
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 54 Post(s)
Liked 175 Times
in
79 Posts
I use both Gladiator and Proslat in our garage. The bikes occupy a small 5' wide corner of space and heights are staggered to accommodate other items. Nice thing about Gladiator panels is that you can purchase them in smaller quantities over an entire 8' x 4' wall panel. Both products can be trimmed to size with a hacksaw/jigsaw and screwed to the wall joists.
#10
On Your Left
Join Date: Nov 2011
Location: Long Island, New York, USA
Posts: 8,373
Bikes: Trek Emonda SLR, Sram eTap, Zipp 303
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 3004 Post(s)
Liked 2,433 Times
in
1,187 Posts
I really like the look of this when they're still like that, but I wonder if taking down or hanging up a bike - especially one of the middle three - would cause them all to swing and bang together and become annoying time after time.
I'd like to do something similar because we have bikes for a family of four on the floor in the garage this time of year (when they're not hung from the ceiling in the winter) and it can be a tight squeeze with both cars in the garage.
I'd like to do something similar because we have bikes for a family of four on the floor in the garage this time of year (when they're not hung from the ceiling in the winter) and it can be a tight squeeze with both cars in the garage.
$15 for a pair
Likes For GlennR:
#11
Senior Member
Join Date: Jun 2020
Location: Maryland
Posts: 1,379
Bikes: 1982 Bianchi Sport SX, Rayleigh Tamland 1, Rans V-Rex recumbent, Fuji MTB, 80's Cannondale MTB with BBSHD ebike motor
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 667 Post(s)
Liked 529 Times
in
355 Posts
I've bent rims hanging bikes by the front wheel like that. If some one bumps them or something falls over into them they torque and bend the rim.
Never again.
Quickest and easiest is hanging the bike by the saddle horn off a waist high pipe or 2x4.
I've seen people hang them by the top bar from the wall using a rack made out of an old pair of drop bars. That looks pretty cool
I store one of my bikes in the rafters of my garage using two J hooks in a 2x3 connected to a pulley arrangement. Gets the bike up out of the way.
I made a bike shed in my back yard and fashioned wheel slots out of plywood and some scrap. Nice thing about that is I can adjust the width of each of each wheel holder for a specific bike by just moving where they are screwed into the plywood decking.
Do a google images search on bike holders
Never again.
Quickest and easiest is hanging the bike by the saddle horn off a waist high pipe or 2x4.
I've seen people hang them by the top bar from the wall using a rack made out of an old pair of drop bars. That looks pretty cool
I store one of my bikes in the rafters of my garage using two J hooks in a 2x3 connected to a pulley arrangement. Gets the bike up out of the way.
I made a bike shed in my back yard and fashioned wheel slots out of plywood and some scrap. Nice thing about that is I can adjust the width of each of each wheel holder for a specific bike by just moving where they are screwed into the plywood decking.
Do a google images search on bike holders
#13
Junior Member
Join Date: Jul 2019
Location: far western MD
Posts: 98
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 41 Post(s)
Likes: 0
Liked 39 Times
in
24 Posts
does not get much easier or cheaper (one 2x4) than this, and it works. You could, of course, put multiple holders on the same base legs
#14
Senior Member
Thread Starter
That's a great looking stand, but I don't have the tools for that.
#16
Senior Member
Thread Starter
Thanks for help and ideas. My struggle was with attaching something to a concrete cinderblock wall. Youtube to the rescue! I found these Tapcon screws and they worked great. Of course, now I have enough left over to build a new house.
Kit comes with a special drill for concrete. Not easy with a regular drill. They suggest a "hammer drill," but I am not going to buy one just for this. I used four over an eight foot span.
Simple bike hooks, about $1 or $2 a piece on ebay. 2x4 from Lowes. That was the only thing that I had to leave the house for, Covid and all.
Five bikes, no problem. One is my adult son's bike. I need to get rid of that one so I can get another for me.
Kit comes with a special drill for concrete. Not easy with a regular drill. They suggest a "hammer drill," but I am not going to buy one just for this. I used four over an eight foot span.
Simple bike hooks, about $1 or $2 a piece on ebay. 2x4 from Lowes. That was the only thing that I had to leave the house for, Covid and all.
Five bikes, no problem. One is my adult son's bike. I need to get rid of that one so I can get another for me.
Likes For bblair:
#17
Senior Member
Join Date: Oct 2013
Location: Mich
Posts: 7,352
Bikes: RSO E-tire dropper fixie brifter
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked 2,942 Times
in
1,905 Posts
Thanks for help and ideas. My struggle was with attaching something to a concrete cinderblock wall. Youtube to the rescue! I found these Tapcon screws and they worked great. Of course, now I have enough left over to build a new house.
Kit comes with a special drill for concrete. Not easy with a regular drill. They suggest a "hammer drill," but I am not going to buy one just for this. I used four over an eight foot span.
Simple bike hooks, about $1 or $2 a piece on ebay. 2x4 from Lowes. That was the only thing that I had to leave the house for, Covid and all.
Five bikes, no problem. One is my adult son's bike. I need to get rid of that one so I can get another for me.
Kit comes with a special drill for concrete. Not easy with a regular drill. They suggest a "hammer drill," but I am not going to buy one just for this. I used four over an eight foot span.
Simple bike hooks, about $1 or $2 a piece on ebay. 2x4 from Lowes. That was the only thing that I had to leave the house for, Covid and all.
Five bikes, no problem. One is my adult son's bike. I need to get rid of that one so I can get another for me.
Just donate the unwanted bicycle to support your N+1 requirements.
__________________
-Oh Hey!
-Oh Hey!
#18
Senior Member
Thread Starter
I guess that would depend on the load and direction. Maybe I will place a few more screws, I do have a full box of them and no other projects in the works.
Likes For bblair:
Likes For WarrenC:
#20
Senior Member
Thread Starter
Beautiful. You obviously do this a lot.
#22
Senior Member
I second GlennR's suggestion to hand them from hooks. I don't have photos (my garage is in the Houston area and I am in Dubai), but it works well for me for my single bikes.
#23
Full Member
Join Date: Sep 2015
Location: Denver Colorado
Posts: 339
Bikes: 2020 Pivot Vault, 1983 Rossin Record, Garneau R1, Mesamods home built gravel/rain commuter bike, 1995 Barracuda A2V modified with Surley single speed dropouts, 1969 Bottecchia junkyard special fixed gear, Cervelo P4, Mesamods 650b klunker
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 96 Post(s)
Liked 72 Times
in
50 Posts
I made this one a couple of years ago. Sub $15 for 2 bikes displayed nicely, but it will hold 4 bikes in a pinch.
#24
Senior Member
Join Date: Jul 2018
Location: Rolesville NC
Posts: 816
Bikes: Had an old Columbia in the 80's, here a used Schwinn hybrid, now a Cannondale Quick 3 and a Topstone 105..
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 249 Post(s)
Liked 306 Times
in
139 Posts
This works for me but I would do one of the hanging variations if I had the space. I made this from scrap wood I had in my shop.
Frank.
#25
Full Member
Join Date: May 2013
Location: Tropical Montana
Posts: 401
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 225 Post(s)
Liked 1,101 Times
in
327 Posts
I just picked up a couple of these racks on Craigslist.
__________________
Montana, where men are men and sheep are lying little tramps.
Montana, where men are men and sheep are lying little tramps.