How Do You Store Bikes?
02-04-21, 02:59 PM
#1
Let's do a Century
Thread Starter
Join Date: Oct 2004
Location: North Carolina
Posts: 8,316
Bikes: Cervelo R3 Disc, Pinarello Prince/Campy SR; Cervelo R3/Sram Red; Trek 5900/Duraace, Lynskey GR260 Ultegra
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 651 Post(s)
Liked 879 Times
in
408 Posts
How Do You Store Bikes?
It looks like we値l be moving to a smaller house one day. The plan would be to sell our two story house and move into a one story house to help us as we get less mobile. In the process we値l greatly reduce the size of our house. However we will have a generously spaced two car garage in the new house.
I might be able to keep one bike on the garage floor, but ideally the others would be stored off the ground. Those would either be on the walls or hung from the ceiling. What have you found that works well for you?
I might be able to keep one bike on the garage floor, but ideally the others would be stored off the ground. Those would either be on the walls or hung from the ceiling. What have you found that works well for you?
__________________
Ride your Ride!!
Ride your Ride!!
02-04-21, 03:16 PM
#2
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 14,949
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6177 Post(s)
Liked 4,794 Times
in
3,306 Posts
Currently for me, it's a wife that is tolerant enough to allow me to keep a couple bikes in the formal dining room which isn't used much as a dining room. <grin>
Right now the bikes in the house are in those little individual stands that many bike shops use to hold a bike upright on the floor by the rear wheel. The other are in the extremely overcrowded garage. Two hung on the walls and held by the top tube with a home made hangars and the other is disassembled and on the shelf.
Been thinking of adding on to the house which will include a bike room just off the back door of the house. I'm really leaning toward those brackets that hold a bike vertically on the wall by either the rear or front wheel.
I've seen some that are hinged to allow you to turn the bike to an angle, presumably to take up less of the room interior. But I'm not so sure how well that will work out if the bikes are spaced as close as I'd have to have them in the size room I'm planning.
Right now the bikes in the house are in those little individual stands that many bike shops use to hold a bike upright on the floor by the rear wheel. The other are in the extremely overcrowded garage. Two hung on the walls and held by the top tube with a home made hangars and the other is disassembled and on the shelf.
Been thinking of adding on to the house which will include a bike room just off the back door of the house. I'm really leaning toward those brackets that hold a bike vertically on the wall by either the rear or front wheel.
I've seen some that are hinged to allow you to turn the bike to an angle, presumably to take up less of the room interior. But I'm not so sure how well that will work out if the bikes are spaced as close as I'd have to have them in the size room I'm planning.
02-04-21, 03:18 PM
#3
Senior Member
Join Date: Jul 2002
Location: Sacramento, California, USA
Posts: 40,865
Bikes: Specialized Tarmac, Canyon Exceed, Specialized Transition, Ellsworth Roots, Ridley Excalibur
Mentioned: 68 Post(s)
Tagged: 0 Thread(s)
Quoted: 2952 Post(s)
Liked 3,106 Times
in
1,417 Posts
I just use wall hooks. Simple, inexpensive, effective.
02-04-21, 03:52 PM
#4
Seat Sniffer
Join Date: Sep 2007
Location: SoCal
Posts: 5,625
Bikes: Serotta Legend Ti; 2006 Schwinn Fastback Pro and 1996 Colnago Decor Super C96; 2003 Univega Alpina 700; 2000 Schwinn Super Sport
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 944 Post(s)
Liked 1,974 Times
in
565 Posts
Mine are all rafter hooks in the garage or sitting in the family room to be admired.
At some point, I'll be in the same boat, so I'm interested in the answers too.
At some point, I'll be in the same boat, so I'm interested in the answers too.
__________________
Proud parent of a happy inner child ...
Proud parent of a happy inner child ...
02-04-21, 04:24 PM
#5
Senior Member
Join Date: Jul 2007
Location: South shore, L.I., NY
Posts: 6,857
Bikes: Flyxii FR322, Cannondale Topstone, Miyata City Liner, Specialized Chisel, Specialized Epic Evo
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 3221 Post(s)
Liked 2,048 Times
in
1,170 Posts
Wheels hanging on 3" hooks on basement wood ceiling beams. I've had multiple bikes hanging vertical this way for 20 years, no issues.
02-04-21, 04:27 PM
#6
Senior Member
Join Date: Dec 2010
Location: northern Deep South
Posts: 8,895
Bikes: Fuji Touring, Novara Randonee
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 2597 Post(s)
Liked 1,924 Times
in
1,208 Posts
Rafter hooks for the ones that don't get ridden much. Bad news it, I don't end up saving a lot of floor space, as I have to leave room to get them down.
02-04-21, 05:35 PM
#7
On Your Left
Join Date: Nov 2011
Location: Long Island, New York, USA
Posts: 8,373
Bikes: Trek Emonda SLR, Sram eTap, Zipp 303
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 3004 Post(s)
Liked 2,433 Times
in
1,187 Posts
Hook from the ceiling.
02-04-21, 05:49 PM
#8
Senior Member
Join Date: Oct 2012
Location: Berkeley CA
Posts: 2,533
Bikes: 1981 Ron Cooper, 1974 Cinelli Speciale Corsa, 2000 Gary Fisher Sugar 1, 1986 Miyata 710, 1982 Raleigh "International"
Mentioned: 97 Post(s)
Tagged: 0 Thread(s)
Quoted: 929 Post(s)
Liked 1,289 Times
in
486 Posts
Mine are all hung upside down from hooks on the ceiling above the hood of my wife's car. That way they aren't in the way when walking around in the garage. I don't store my mountain bike that way because I've been told that it is bad for the suspension fork (don't know if this is an old cyclists wife's tale though).
02-04-21, 05:56 PM
#9
Senior Member
Join Date: Jul 2004
Location: northern michigan
Posts: 13,317
Bikes: '77 Colnago Super, '76 Fuji The Finest, '88 Cannondale Criterium, '86 Trek 760, '87 Miyata 712
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 659 Post(s)
Liked 595 Times
in
313 Posts
I have a special bike room where special bikes stay. The MTB’s are very nice but stay in my bike shop year round.
02-04-21, 06:47 PM
#10
Broom Wagon Fodder
Join Date: Jul 2006
Location: Minnesota
Posts: 1,384
Bikes: Fuji Supreme; Kona Wo; Nashbar road frame custom build; Schwinn Varsity; Nishiki International; Schwinn Premis, Falcon Merckx, American Flyer muscle bike, Motobecane Mulekick
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 52 Post(s)
Liked 64 Times
in
30 Posts
Rafter hooks for the bikes that aren't ridden much. Fat bike has a PVC stand that I made from many plans found on the Internet. Regular 3-season ride leans against the garage wall.
02-05-21, 08:20 AM
#11
Senior Member
Join Date: Dec 2010
Location: northern Deep South
Posts: 8,895
Bikes: Fuji Touring, Novara Randonee
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 2597 Post(s)
Liked 1,924 Times
in
1,208 Posts
Likes For pdlamb:
02-05-21, 08:42 AM
#12
Senior Member
I have a very small garage so I hang mine by the wheels from hooks near the side wall. We have four of them.
02-05-21, 08:50 AM
#13
Junior Member
I bolted a 2X6 to the frame of my metal shop. At first I just had hooks coming straight out from the 2X6, but the bikes took up too much room sticking straight out. So, after seeing a swiveling bike rack advertised on social media, I looked them up. They were $100 each, so I passed. After thinking about t for a while, I bought 4 regular door hinges and attached them to 5" pieces of 2X4 then attached them to the 2X6. That worked OK, but I had troubles putting the bikes in the hooks because they kept turning on me. I went back to Home Depot and bought 4 screen door hasps with a hook and eyelet that I can hook and unhook to keep the hooks from moving. I like it. We'll see how long the 2X4's last, but they've been good for a few months. Total cost - $20.
02-05-21, 09:10 AM
#14
Zip tie Karen
Join Date: Aug 2009
Location: Fair Oaks Ranch, TX
Posts: 7,004
Bikes: '13 Motobecane Fantom29 HT, '16 Motobecane Turino Pro Disc, '18 Velobuild VB-R-022, '21 Tsunami SNM-100
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1465 Post(s)
Liked 1,542 Times
in
806 Posts
Saris makes the Cycle Glide ceiling rack system that hangs the bikes inverted, and has adjustable spacing. The previous owner of my home conveyed these with the sale, along with another floor-to-ceiling two-position bicycle stand that I use in my shop area. So, my home came with six built-in storage positions. Nice.
Last edited by Phil_gretz; 02-05-21 at 09:15 AM.
02-05-21, 09:16 AM
#15
Zip tie Karen
Join Date: Aug 2009
Location: Fair Oaks Ranch, TX
Posts: 7,004
Bikes: '13 Motobecane Fantom29 HT, '16 Motobecane Turino Pro Disc, '18 Velobuild VB-R-022, '21 Tsunami SNM-100
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1465 Post(s)
Liked 1,542 Times
in
806 Posts
I also put up pulleys for the mountain bikes. This way, my wife can get hers down without my help. Plus, they're unwieldy to lift overhead.
02-05-21, 12:15 PM
#16
Let's do a Century
Thread Starter
Join Date: Oct 2004
Location: North Carolina
Posts: 8,316
Bikes: Cervelo R3 Disc, Pinarello Prince/Campy SR; Cervelo R3/Sram Red; Trek 5900/Duraace, Lynskey GR260 Ultegra
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 651 Post(s)
Liked 879 Times
in
408 Posts
I bolted a 2X6 to the frame of my metal shop. At first I just had hooks coming straight out from the 2X6, but the bikes took up too much room sticking straight out. So, after seeing a swiveling bike rack advertised on social media, I looked them up. They were $100 each, so I passed. After thinking about t for a while, I bought 4 regular door hinges and attached them to 5" pieces of 2X4 then attached them to the 2X6. That worked OK, but I had troubles putting the bikes in the hooks because they kept turning on me. I went back to Home Depot and bought 4 screen door hasps with a hook and eyelet that I can hook and unhook to keep the hooks from moving. I like it. We'll see how long the 2X4's last, but they've been good for a few months. Total cost - $20.
Terrific! You致e already figured out what I was hoping to see someone do. I like what you致e done as it takes up minimal space along the wall plus you can access the bikes from the ground. Do you mind taking a close up picture of the hook holding the wheel and the 2x4? I知 having trouble figuring out how the wheel is held up. I really like the idea of them folding against each other.
I currently have bikes on ceiling hooks and standing on the floor of the garage leaning against walls. . I値l be losing a room I built on the back of the garage which currently holds all my tools and lawnmower so a lot of that will need to go into the garage at the new house.. I also have 5-6 sets of golf clubs hanging on the walls and another 5-6 lying on shelving in the front of the garage. I値l need to get rid of all but a couple sets of golf clubs. Plus I have enough bike clothing to occupy a whole closet. This is going to be a real challenge .........
__________________
Ride your Ride!!
Ride your Ride!!
02-05-21, 12:44 PM
#17
Junior Member
Terrific! You致e already figured out what I was hoping to see someone do. I like what you致e done as it takes up minimal space along the wall plus you can access the bikes from the ground. Do you mind taking a close up picture of the hook holding the wheel and the 2x4? I知 having trouble figuring out how the wheel is held up. I really like the idea of them folding against each other.
I currently have bikes on ceiling hooks and standing on the floor of the garage leaning against walls. . I値l be losing a room I built on the back of the garage which currently holds all my tools and lawnmower so a lot of that will need to go into the garage at the new house.. I also have 5-6 sets of golf clubs hanging on the walls and another 5-6 lying on shelving in the front of the garage. I値l need to get rid of all but a couple sets of golf clubs. Plus I have enough bike clothing to occupy a whole closet. This is going to be a real challenge .........
I currently have bikes on ceiling hooks and standing on the floor of the garage leaning against walls. . I値l be losing a room I built on the back of the garage which currently holds all my tools and lawnmower so a lot of that will need to go into the garage at the new house.. I also have 5-6 sets of golf clubs hanging on the walls and another 5-6 lying on shelving in the front of the garage. I値l need to get rid of all but a couple sets of golf clubs. Plus I have enough bike clothing to occupy a whole closet. This is going to be a real challenge .........
Here's a link to the hook at HD:
https://www.homedepot.com/p/Everbilt...1221/202305458
Link to the hasp:
https://www.homedepot.com/p/Everbilt...5342/202033980
02-05-21, 03:25 PM
#18
Let's do a Century
Thread Starter
Join Date: Oct 2004
Location: North Carolina
Posts: 8,316
Bikes: Cervelo R3 Disc, Pinarello Prince/Campy SR; Cervelo R3/Sram Red; Trek 5900/Duraace, Lynskey GR260 Ultegra
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 651 Post(s)
Liked 879 Times
in
408 Posts
I'm at work, but the hooks I got at Home Depot for $2 each. They're basically screwed into the center of 5" of 2X4. The hinges are screwed into the 2X6 and the 2X4 on the left side of the 2X4 so they swing to the left. I can take a closer picture this weekend and post on Monday. I stay off the computer and phone on the weekends for my own mental health.
Here's a link to the hook at HD:
https://www.homedepot.com/p/Everbilt...1221/202305458
Link to the hasp:
https://www.homedepot.com/p/Everbilt...5342/202033980
Here's a link to the hook at HD:
https://www.homedepot.com/p/Everbilt...1221/202305458
Link to the hasp:
https://www.homedepot.com/p/Everbilt...5342/202033980
__________________
Ride your Ride!!
Ride your Ride!!
02-05-21, 08:54 PM
#19
Senior Member
I like it!
I bolted a 2X6 to the frame of my metal shop. At first I just had hooks coming straight out from the 2X6, but the bikes took up too much room sticking straight out. So, after seeing a swiveling bike rack advertised on social media, I looked them up. They were $100 each, so I passed. After thinking about t for a while, I bought 4 regular door hinges and attached them to 5" pieces of 2X4 then attached them to the 2X6. That worked OK, but I had troubles putting the bikes in the hooks because they kept turning on me. I went back to Home Depot and bought 4 screen door hasps with a hook and eyelet that I can hook and unhook to keep the hooks from moving. I like it. We'll see how long the 2X4's last, but they've been good for a few months. Total cost - $20.
02-06-21, 08:04 AM
#20
On Your Left
Join Date: Nov 2011
Location: Long Island, New York, USA
Posts: 8,373
Bikes: Trek Emonda SLR, Sram eTap, Zipp 303
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 3004 Post(s)
Liked 2,433 Times
in
1,187 Posts
My son's garage.
Likes For GlennR:
02-07-21, 09:46 AM
#21
Senior Member
Simple bike hooks, about $1 or $2 a piece on ebay. 2x4 from Lowes. That was the only thing that I had to leave the house for, Covid and all.
My bikes are always inside, in the basement. The only exceptions are my tandem (too darn big and heavy) and my single speed which I use to run local errands.
Likes For bblair:
02-07-21, 10:12 AM
#22
Airplanes, bikes, beer.
Join Date: Jan 2020
Location: Off the front
Posts: 763
Bikes: Road bikes, mountain bikes, a cx bike, a gravel bike…
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 398 Post(s)
Liked 788 Times
in
339 Posts
Mine are all hung upside down from hooks on the ceiling above the hood of my wife's car. That way they aren't in the way when walking around in the garage. I don't store my mountain bike that way because I've been told that it is bad for the suspension fork (don't know if this is an old cyclists wife's tale though).
Likes For h2oxtc:
02-08-21, 07:33 AM
#24
Senior Member
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 9,579
Bikes: '65 Frejus TDF, '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '89 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8
Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 1607 Post(s)
Liked 2,213 Times
in
1,103 Posts
When we had the house built, a third garage was added for my use. Fortunately, the ceiling is tall but just shy of being tall enough to store above the door. Still got it done.
P1000599, on Flickr
P1000599, on Flickr
__________________
Bikes don't stand alone. They are two tired.
Bikes don't stand alone. They are two tired.
02-08-21, 08:09 AM
#25
Senior Member
Join Date: May 2020
Location: Great White North
Posts: 1,226
Bikes: 2013 Cannondale Caad 8, 2010 Opus Fidelio, 1985 Peugeot UO14, 1999 Peugeot Dune, Sakai Select, L'Avantage, 1971 Gitane Apache Standard, 1999 Specialized Hard Rock
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 548 Post(s)
Liked 473 Times
in
302 Posts
wow some nice set ups, you all have more storage space than me! ha ha I have a side split bungalow and still have big kids living with me so limited space for bikes. I have 2 road bikes in the basement (1 sitting on the trainer and the other for show) and then loads of bikes in the garage which is dry and insulated.
The garage is quite small so with a family's worth of "stuff" I don't have the luxury of creating a bike hanging wall or anything but is there anything wrong with just leaning them up against the wall? I do ride most of them on a regular basis (when it's not -11 C like it is now)
The garage is quite small so with a family's worth of "stuff" I don't have the luxury of creating a bike hanging wall or anything but is there anything wrong with just leaning them up against the wall? I do ride most of them on a regular basis (when it's not -11 C like it is now)
