Nothing to see here, just another Schwinn..
#1
Senior Member
Thread Starter
Join Date: Nov 2010
Location: Magnolia State, 100° with 110% humidity
Posts: 1,230
Bikes: American, Italian, and Japanese.. in no particular order.
Mentioned: 21 Post(s)
Tagged: 0 Thread(s)
Quoted: 350 Post(s)
Liked 276 Times
in
128 Posts
Nothing to see here, just another Schwinn..
Ciao Amico Fidatos,
I was given a 1987 Schwinn Prelude frameset earlier this year by @mstateglfr, and I knew immediately that this was one that I wouldn’t be afraid to make minor modifications to. The project in mind was to create a bike that emulated vintage Italian styling from the 60s/70s, but to do it on a minimal budget. The thing that I like about this frameset is its relaxed HT/ST geometry and that it is made from Columbus tubing. It has all day comfort so it was a perfect candidate.
To begin, I removed as many frame brazeons as I possibly could without going down a rabbit hole. I drewed the top tube guides, the head tube pump peg, all four fender eyelets, and the rear derailleur cable stop. The cable stop was replaced with a diver helmet courtesy of @gugie. (it brazed much easier than I anticipated). Also I spread the rear triangle to 128-130mm. I’m still debating drilling/tapping for dropout adjusters later on.
I wanted to build this with as many bin components as I could scrounge with Italian origin being the priority; however, the bin was somewhat shallow, so I backfilled with suitable Japanese pieces with no qualms. There were a few pieces that I did not have, and had to purchase. @jeirvine supplied the Campy front derailleur, and @gugie provided info for sourcing the top tube guides. I bought the English threaded Ofmega BB off the internet. The broken Gipiemme rear freewheel hub was replaced with a Shimano 5500 unit that was modified to receive the oil port cover. I even reused old handlebar tape... well, just because. I paid homage to the frame/components countries of origin on the NDS chain stay.
For the color choice, I looked to the pastel colors of the Detroit-based autos from the 50s/60s. It has been noted by @merziac that the color of choice is Bianchi flavored, and I must agree. With the exception of the fork decal (which I already had), I made the others using MS Office, a snipping app, and a pack of decal paper. It would be an understatement to say that waterslide paper is a good barometer of one’s patience. Afterwards, I top coated with Spraymax 2K urethane to seal the deal.
I assembled everything yesterday with a test ride pending. I was aiming for a vibe.. didn’t worry about correctness..
As for Amico Fidato (trusted friend), I thought a bit of Italian plastered to the NDS would be magnifico karma.
-Dwayne
I was given a 1987 Schwinn Prelude frameset earlier this year by @mstateglfr, and I knew immediately that this was one that I wouldn’t be afraid to make minor modifications to. The project in mind was to create a bike that emulated vintage Italian styling from the 60s/70s, but to do it on a minimal budget. The thing that I like about this frameset is its relaxed HT/ST geometry and that it is made from Columbus tubing. It has all day comfort so it was a perfect candidate.
To begin, I removed as many frame brazeons as I possibly could without going down a rabbit hole. I drewed the top tube guides, the head tube pump peg, all four fender eyelets, and the rear derailleur cable stop. The cable stop was replaced with a diver helmet courtesy of @gugie. (it brazed much easier than I anticipated). Also I spread the rear triangle to 128-130mm. I’m still debating drilling/tapping for dropout adjusters later on.
I wanted to build this with as many bin components as I could scrounge with Italian origin being the priority; however, the bin was somewhat shallow, so I backfilled with suitable Japanese pieces with no qualms. There were a few pieces that I did not have, and had to purchase. @jeirvine supplied the Campy front derailleur, and @gugie provided info for sourcing the top tube guides. I bought the English threaded Ofmega BB off the internet. The broken Gipiemme rear freewheel hub was replaced with a Shimano 5500 unit that was modified to receive the oil port cover. I even reused old handlebar tape... well, just because. I paid homage to the frame/components countries of origin on the NDS chain stay.
For the color choice, I looked to the pastel colors of the Detroit-based autos from the 50s/60s. It has been noted by @merziac that the color of choice is Bianchi flavored, and I must agree. With the exception of the fork decal (which I already had), I made the others using MS Office, a snipping app, and a pack of decal paper. It would be an understatement to say that waterslide paper is a good barometer of one’s patience. Afterwards, I top coated with Spraymax 2K urethane to seal the deal.
I assembled everything yesterday with a test ride pending. I was aiming for a vibe.. didn’t worry about correctness..
As for Amico Fidato (trusted friend), I thought a bit of Italian plastered to the NDS would be magnifico karma.
-Dwayne
Last edited by tyler_fred; 02-11-21 at 08:21 AM.
Likes For tyler_fred:
#5
Senior Member
Join Date: Dec 2015
Location: Menomonee Falls, WI
Posts: 1,833
Bikes: 1984 Schwinn Supersport, 1988 Trek 400T, 1977 Trek TX900, 1982 Bianchi Champione del Mondo, 1978 Raleigh Supercourse, 1986 Trek 400 Elance, 1991 Waterford PDG OS Paramount, 1971 Schwinn Sports Tourer, 1985 Trek 670
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 604 Post(s)
Liked 1,063 Times
in
535 Posts
Pretty Awesome, I like it a lot! Now you have me looking at the possibilities with my 84 Supersport. Way to bring back an old Schwinn, you nailed it!
Tim
Tim
#6
Senior Member
Join Date: Feb 2017
Location: Concord, NC
Posts: 701
Bikes: 1984 Bianchi Tipo Corsa, 1985 Cannondale SM600 (24/26)
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 235 Post(s)
Liked 349 Times
in
190 Posts
Very nice bike! I sold a few of those back in the Eighties.
(If a bike company were smart, they'd jump on that as their "signature" color!)
(If a bike company were smart, they'd jump on that as their "signature" color!)
#7
Sunshine
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,610
Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo
Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 10955 Post(s)
Liked 7,484 Times
in
4,186 Posts
Well you certainly put in the thought and sweat equity to make it your own! That's fantastic- strong work.
What I love about this subforum is the variety and creativity its posters bring.
In the span of 3 years with me, that frame was a traditional downtube shifting 2x7 bike, an STI shifting 2x7 bike, and a single-singlespeed bike. You have now given it yet another personality. That bike has changed its image more than Madonna!
And the frame that replaced this one on my end is a Schwinn Premis that was trashed, so new cable guides were brazed on, it was powdercoated, and is now a 2x11 road bike.
The crestive variety and re-imaging of bikes on this forum is just great to see.
What I love about this subforum is the variety and creativity its posters bring.
In the span of 3 years with me, that frame was a traditional downtube shifting 2x7 bike, an STI shifting 2x7 bike, and a single-singlespeed bike. You have now given it yet another personality. That bike has changed its image more than Madonna!
And the frame that replaced this one on my end is a Schwinn Premis that was trashed, so new cable guides were brazed on, it was powdercoated, and is now a 2x11 road bike.
The crestive variety and re-imaging of bikes on this forum is just great to see.
Likes For mstateglfr:
#8
Senior Member
Join Date: Sep 2005
Location: Oakland, CA
Posts: 3,265
Bikes: '82 Univega Competizione, '72 Motobecane Grand Record, '83 Mercian KOM Touring, '85 Univega Alpina Uno, '76 Eisentraut Limited
Mentioned: 57 Post(s)
Tagged: 0 Thread(s)
Quoted: 1088 Post(s)
Liked 1,205 Times
in
701 Posts
I love it!
#9
Senior Member
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 9,579
Bikes: '65 Frejus TDF, '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '89 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8
Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 1607 Post(s)
Liked 2,216 Times
in
1,103 Posts
Great work! like it! Yes, interesting color. Certainly would confuse some!
__________________
Bikes don't stand alone. They are two tired.
Bikes don't stand alone. They are two tired.
#10
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,634
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4678 Post(s)
Liked 5,795 Times
in
2,281 Posts
Ciao bella!
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
#11
Senior Member
Join Date: Jan 2017
Location: Berea, KY
Posts: 1,135
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 360 Post(s)
Liked 323 Times
in
186 Posts
That is lovely. Great job.
I have read through the various Tenax threads and I know there is some mystery around it. I am curious if anyone knows if there is a difference between the Tenax used on the road bikes like this one and the Tenax used on the Voyageurs? Were there different butting profiles?
I have read through the various Tenax threads and I know there is some mystery around it. I am curious if anyone knows if there is a difference between the Tenax used on the road bikes like this one and the Tenax used on the Voyageurs? Were there different butting profiles?
__________________
Andy
Andy
Last edited by beicster; 08-05-20 at 11:31 AM.
Likes For tyler_fred:
#13
Senior Member
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 9,579
Bikes: '65 Frejus TDF, '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '89 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8
Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 1607 Post(s)
Liked 2,216 Times
in
1,103 Posts
#14
weapons-grade bolognium
Join Date: Dec 2008
Location: Across the street from Chicago
Posts: 6,344
Bikes: Battaglin Cromor, Ciocc Designer 84, Schwinn Superior 1981
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 985 Post(s)
Liked 2,378 Times
in
891 Posts
That looks great - nice work!
how does it ride? I just sold a way too small 1987 Prelude. The frame looked really nice, but I couldn't get an impression of the ride or handling.
how does it ride? I just sold a way too small 1987 Prelude. The frame looked really nice, but I couldn't get an impression of the ride or handling.
#15
Senior Member
Join Date: Dec 2005
Posts: 17,155
Mentioned: 481 Post(s)
Tagged: 0 Thread(s)
Quoted: 3810 Post(s)
Liked 6,687 Times
in
2,609 Posts
Well done! I really like that color.
#16
Freewheel Medic
Join Date: Oct 2005
Location: An Island on the Coast of GA!
Posts: 12,882
Bikes: Snazzy* Schwinns, Classy Cannondales & a Super Pro Aero Lotus (* Ed.)
Mentioned: 140 Post(s)
Tagged: 0 Thread(s)
Quoted: 1452 Post(s)
Liked 2,195 Times
in
962 Posts
Bella bicicletta! Esecuzione perfetta. Invidio il tuo pisonato. Che classico!
__________________
Bob
Enjoying the GA coast all year long!
Thanks for visiting my website: www.freewheelspa.com
Bob
Enjoying the GA coast all year long!
Thanks for visiting my website: www.freewheelspa.com
#17
Senior Member
Thread Starter
Join Date: Nov 2010
Location: Magnolia State, 100° with 110% humidity
Posts: 1,230
Bikes: American, Italian, and Japanese.. in no particular order.
Mentioned: 21 Post(s)
Tagged: 0 Thread(s)
Quoted: 350 Post(s)
Liked 276 Times
in
128 Posts
Likes For tyler_fred:
#18
Senior Member
Join Date: Jun 2013
Location: 700 Ft. above sea level.
Posts: 3,249
Bikes: More than there were awhile ago.
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 637 Post(s)
Liked 1,281 Times
in
609 Posts
"Just" another Schwinn? I think not. Gorgeous, simply gorgeous.
__________________
".....distasteful and easily triggered."
".....distasteful and easily triggered."
#19
Senior Member
Thread Starter
Join Date: Nov 2010
Location: Magnolia State, 100° with 110% humidity
Posts: 1,230
Bikes: American, Italian, and Japanese.. in no particular order.
Mentioned: 21 Post(s)
Tagged: 0 Thread(s)
Quoted: 350 Post(s)
Liked 276 Times
in
128 Posts
Thank you all for your comments. If anyone wishes to make their own decals, I recommend the thicker 23µ waterslide paper. The 13µ tends to curl under and stretch too easily. Here's a pic of my decal file. Remember.. Nesting is your friend!!
#20
Junior Member
Join Date: Jun 2015
Location: SE Pennsylvania
Posts: 20
Bikes: 6 or 7 Raleighs, a Schwinn, a Bianchi
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 5 Times
in
4 Posts
Nice job on the Schwinn! With that color and red decals it's reminiscent of older Bianchis.
Could you tell me what brand and model the brakes are?
Thanks
pete
Could you tell me what brand and model the brakes are?
Thanks
pete
#21
Shifting is fun!
Join Date: Aug 2009
Location: South Holland, NL
Posts: 11,004
Bikes: Yes, please.
Mentioned: 280 Post(s)
Tagged: 0 Thread(s)
Quoted: 2198 Post(s)
Liked 4,600 Times
in
1,764 Posts
I am beginning to like these build-your-own-bike-with-what's-available projects more and more. And this is a fine example. Well done!