What bottom bracket size /model do I need?
#1
Newbie
Thread Starter
Join Date: Jul 2017
Posts: 3
Bikes: Charlescen
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
What bottom bracket size /model do I need?
Hello people, so I'm working on a bike build and got a frame recently second hand but when I measure in the inside tube, it doesn't add up, so bit confused.
Frame is Giant defy advanced 1(2014) Medium. From online specs it says Shimano press fit, but no sizing. I'm also using Shimano 105 cranks, if that helps.
Appreciate the help!
Frame is Giant defy advanced 1(2014) Medium. From online specs it says Shimano press fit, but no sizing. I'm also using Shimano 105 cranks, if that helps.
Appreciate the help!
#2
SE Wis
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 10,509
Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400, 2013 Novara Randonee, 1990 Trek 970
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 2744 Post(s)
Liked 3,390 Times
in
2,053 Posts
Shimano 105 cranks covers about 20 years and numerous generations and BB types. You'll need to be a bit more specific.
Everything from this.
https://velobase.com/ViewComponent.as...34a99&Enum=115
To this
https://bike.shimano.com/en-EU/compo.../crankset.html
https://bike.shimano.com/en-EU/produ...M-BB72-41.html
Everything from this.
https://velobase.com/ViewComponent.as...34a99&Enum=115
To this
https://bike.shimano.com/en-EU/compo.../crankset.html
https://bike.shimano.com/en-EU/produ...M-BB72-41.html
#4
SE Wis
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 10,509
Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400, 2013 Novara Randonee, 1990 Trek 970
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 2744 Post(s)
Liked 3,390 Times
in
2,053 Posts
https://si.shimano.com/pdfs/dm/DM-FC0003-06-ENG.pdf
https://productinfo.shimano.com/#/co...453&acid=C-455
https://productinfo.shimano.com/#/co...453&acid=C-455
Last edited by dedhed; 06-15-19 at 05:27 AM.
#5
Super Modest
Join Date: Jun 2002
Location: Central Illinois
Posts: 23,466
Bikes: Trek Emonda, Giant Propel, Colnago V3, Co-Motion Supremo, ICE VTX WC
Mentioned: 107 Post(s)
Tagged: 1 Thread(s)
Quoted: 10963 Post(s)
Liked 4,620 Times
in
2,123 Posts
Moving to Mechanics Forum
__________________
Keep the chain tight!
#6
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,096 Times
in
742 Posts
The FC-5800 is a Hollowtech II design with the spindle built into the driveside crank arm so the spindle length is fixed. The matching bottom bracket has external cups and you need the press-fit version which is SM-BB72-41.
Thread
Thread Starter
Forum
Replies
Last Post
duganator
Bicycle Mechanics
10
09-22-18 09:31 PM
amgarcia
General Cycling Discussion
5
06-14-12 10:56 PM