ISO and for trade thread part 5
#2026
aka: Dr. Cannondale
Join Date: Jul 2009
Posts: 7,729
Mentioned: 234 Post(s)
Tagged: 0 Thread(s)
Quoted: 2152 Post(s)
Liked 3,402 Times
in
1,203 Posts
ISO crank arm bolt washer for a Campagnolo Record crankset; triple 10s UD (circa mid-2000s )
See washer in photo.
OD = 20.5 mm
ID = 12.7 mm
Thickness = 1.08 mm
I've been to two large LBS, a chain hardware store, a fantastic large old-school hardware store, and McMaster-Carr with no success.
The closest size to what I need is too thick and with a ID too small for the bolt to fit flush and secure.
See washer in photo.
OD = 20.5 mm
ID = 12.7 mm
Thickness = 1.08 mm
I've been to two large LBS, a chain hardware store, a fantastic large old-school hardware store, and McMaster-Carr with no success.
The closest size to what I need is too thick and with a ID too small for the bolt to fit flush and secure.
PM me your address and I'll drop them in the mail.
__________________
Hard at work in the Secret Underground Laboratory...
Hard at work in the Secret Underground Laboratory...
#2027
Señor Member
Join Date: Oct 2004
Location: Hardy, VA
Posts: 17,923
Bikes: Mostly English - predominantly Raleighs
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 1491 Post(s)
Liked 1,090 Times
in
638 Posts
Found
I have, a fluted, 27.2 seatpost with a single bolt. I believe it is a LaPrade, but seeing no manufacturer marking, it may not be. From bottom to top it measures 160mm. From bottom to the bottom of the fluting, 80mm. There is some zig-zagging below the fluting, but only very little of this would be showing if adequately inserted.
Want - a non-fluted, silver 27.2 seatpost with either one adjustment bolt, or two (I do prefer two, but that's just a "tie-breaker"). I like the idea of fluted seatposts, but the fluting extends into the seat tube when the saddle is set at the proper height for me, which. I'm willing to account for value differential.
pictures:
I have, a fluted, 27.2 seatpost with a single bolt. I believe it is a LaPrade, but seeing no manufacturer marking, it may not be. From bottom to top it measures 160mm. From bottom to the bottom of the fluting, 80mm. There is some zig-zagging below the fluting, but only very little of this would be showing if adequately inserted.
Want - a non-fluted, silver 27.2 seatpost with either one adjustment bolt, or two (I do prefer two, but that's just a "tie-breaker"). I like the idea of fluted seatposts, but the fluting extends into the seat tube when the saddle is set at the proper height for me, which. I'm willing to account for value differential.
pictures:
__________________
In search of what to search for.
In search of what to search for.
Last edited by USAZorro; 02-06-20 at 12:25 PM.
#2028
The dropped
Join Date: Oct 2018
Location: Columbus, OH
Posts: 2,144
Bikes: Pake C'Mute Touring/Commuter Build, 1989 Kona Cinder Cone, 1995 Trek 5200, 1973 Raleigh Super Course FG, 1960/61 Montgomery Ward Hawthorne "thrift" 3 speed, by Hercules (sold) : 1966 Schwinn Deluxe Racer (sold)
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1739 Post(s)
Liked 1,014 Times
in
696 Posts
I have, a fluted, 27.2 seatpost with a single bolt. I believe it is a LaPrade, but seeing no manufacturer marking, it may not be. From bottom to top it measures 160mm. From bottom to the bottom of the fluting, 80mm. There is some zig-zagging below the fluting, but only very little of this would be showing if adequately inserted.
Want - a non-fluted, silver 27.2 seatpost with either one adjustment bolt, or two (I do prefer two, but that's just a "tie-breaker"). I like the idea of fluted seatposts, but the fluting extends into the seat tube when the saddle is set at the proper height for me, which. I'm willing to account for value differential.
pictures:
Want - a non-fluted, silver 27.2 seatpost with either one adjustment bolt, or two (I do prefer two, but that's just a "tie-breaker"). I like the idea of fluted seatposts, but the fluting extends into the seat tube when the saddle is set at the proper height for me, which. I'm willing to account for value differential.
pictures:
I should say one bolt seatposts. The seat pin was originally chromed steel with a clamp...
Last edited by Unca_Sam; 02-06-20 at 10:11 AM. Reason: last thought
#2029
Señor Member
Join Date: Oct 2004
Location: Hardy, VA
Posts: 17,923
Bikes: Mostly English - predominantly Raleighs
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 1491 Post(s)
Liked 1,090 Times
in
638 Posts
While It's unlikely you'll want it, I have a 27.2 silver Kalloy single bolt seatpost that I'm not likely to use, since I replaced it with a black post. I'm not interested in a direct replacement, though I will be in strong need of a 26.4 seatpost longer than 250mm. Seatposts from the bike's era just weren't made that long...
I should say one bolt seatposts. The seat pin was originally chromed steel with a clamp...
I should say one bolt seatposts. The seat pin was originally chromed steel with a clamp...
Thanks...
__________________
In search of what to search for.
In search of what to search for.
#2030
The dropped
Join Date: Oct 2018
Location: Columbus, OH
Posts: 2,144
Bikes: Pake C'Mute Touring/Commuter Build, 1989 Kona Cinder Cone, 1995 Trek 5200, 1973 Raleigh Super Course FG, 1960/61 Montgomery Ward Hawthorne "thrift" 3 speed, by Hercules (sold) : 1966 Schwinn Deluxe Racer (sold)
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1739 Post(s)
Liked 1,014 Times
in
696 Posts
That seems to be the case a lot around here!
#2031
Senior Member
Join Date: May 2019
Location: Bloomington, IN
Posts: 2,947
Bikes: Paramount, Faggin, Ochsner, Ciocc, Basso
Mentioned: 116 Post(s)
Tagged: 0 Thread(s)
Quoted: 1303 Post(s)
Liked 1,910 Times
in
1,140 Posts
So I went to my local Fastenal store today because like many here who need crank bolts and washers for Campy bottom brackets and arms. I was able to source 500 crank bolts that are grade 10 in the 15 mm size for the cap and with 8X1 pitch. The washers they had were sourced from the imperial catalog in a 3/8" inner diameter, with a .810" outer diameter. The washer height is 1/16" or 1.6 mm again I ordered 500. These will be very effective at replacing the lost bolts and washers for many of the BBs I come across. Will they say Campy? no. Will they hold the crank arm on? yes. So by next week, I will have then available to those who need them. HTH smiles, MH
Woo Hoo! Parts came in today! Will have them in my grubby little paws by this afternoon.
A minor glitch from Fastenal, the bolt cap is 13 mm. So they are sending special 8 mm washers that take the bolt cap to 16 mm to equal that of the original Campy bolt cap. appears to be the best solution. And it works!
Looks like I can send these out in pairs with washers for $6 plus shipping through USPS. Smiles, MH
Woo Hoo! Parts came in today! Will have them in my grubby little paws by this afternoon.
A minor glitch from Fastenal, the bolt cap is 13 mm. So they are sending special 8 mm washers that take the bolt cap to 16 mm to equal that of the original Campy bolt cap. appears to be the best solution. And it works!
Looks like I can send these out in pairs with washers for $6 plus shipping through USPS. Smiles, MH
Last edited by Mad Honk; 02-07-20 at 03:23 PM. Reason: new information
Likes For Mad Honk:
#2032
Senior Member
Join Date: Sep 2017
Location: Greenville SC
Posts: 4,126
Bikes: 1975 Motobecane Grand Jubile, 2020 Holdsworth Competition, 2022 Giant Trance 29 3
Mentioned: 42 Post(s)
Tagged: 0 Thread(s)
Quoted: 3357 Post(s)
Liked 3,637 Times
in
1,243 Posts
ISO:
Dura-Ace 7700 (9spd) or 7900 (10spd) downtube shifters. Thanks nesteel !
Dura-Ace 7800 9/10 speed rear derailleur
I would prefer the 10 speed shifters, but 9 would work too.
Not looking for NOS, but not trashed either. They would be going on a rider. A nice rider, but a rider nonetheless.
Thanks!
Dura-Ace 7800 9/10 speed rear derailleur
Not looking for NOS, but not trashed either. They would be going on a rider. A nice rider, but a rider nonetheless.
Thanks!
Last edited by abshipp; 02-12-20 at 11:30 AM.
#2033
Senior Member
Join Date: Sep 2019
Location: Cincinnati, OH
Posts: 655
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 189 Post(s)
Liked 473 Times
in
200 Posts
Looking for:
One Dura Ace 7400 single-pivot brake. Could be front or rear. Condition not too important - looking for small bits that go with it.
Campagnolo Super Record rear derailleur Pat. 83
Campagnolo Super Record brake set for 1983 bike
These are for a rider, but hoping to find something not worn down.
One Dura Ace 7400 single-pivot brake. Could be front or rear. Condition not too important - looking for small bits that go with it.
Campagnolo Super Record rear derailleur Pat. 83
Campagnolo Super Record brake set for 1983 bike
These are for a rider, but hoping to find something not worn down.
#2034
Newbie
ISO 64-67cm Flexy Frame/Complete
I've got an itch to try out one of those noddley old road bikes some people seem to love. Something with Reynolds 531c, Tange 1, or other standard diameter 8-5-8 or lighter tubed bike. Anyone have something lying around I could snag?
I ride my saddle height at 83.5cm for context, so I'd be looking for somewhere between 64-67cm frames.
If it's all beat up, that's probably better since I'm not sure I want to commit to something fancy. Hoping to find something for around $200ish
Let me know if you have anything or if you see something pop up.
Tim O.
Portland, OR
I ride my saddle height at 83.5cm for context, so I'd be looking for somewhere between 64-67cm frames.
If it's all beat up, that's probably better since I'm not sure I want to commit to something fancy. Hoping to find something for around $200ish
Let me know if you have anything or if you see something pop up.
Tim O.
Portland, OR
#2035
Señor Member
Join Date: Dec 2007
Location: Colorado
Posts: 895
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 284 Post(s)
Liked 296 Times
in
149 Posts
I’ve got a Miami Vice Ironman (Tange 1) with a 64cm CTT seat tube in the shed, if that would be of interest. May be on the small side for you.
It’s broken down into a frameset hanging up and complete groupset (Shimano 105) in a box somewhere. Condition is pretty good, as I recall.
It’s broken down into a frameset hanging up and complete groupset (Shimano 105) in a box somewhere. Condition is pretty good, as I recall.
I've got an itch to try out one of those noddley old road bikes some people seem to love. Something with Reynolds 531c, Tange 1, or other standard diameter 8-5-8 or lighter tubed bike. Anyone have something lying around I could snag?
I ride my saddle height at 83.5cm for context, so I'd be looking for somewhere between 64-67cm frames.
If it's all beat up, that's probably better since I'm not sure I want to commit to something fancy. Hoping to find something for around $200ish
Let me know if you have anything or if you see something pop up.
Tim O.
Portland, OR
I ride my saddle height at 83.5cm for context, so I'd be looking for somewhere between 64-67cm frames.
If it's all beat up, that's probably better since I'm not sure I want to commit to something fancy. Hoping to find something for around $200ish
Let me know if you have anything or if you see something pop up.
Tim O.
Portland, OR
#2036
Newbie
That sounds interesting. Can you send me a message or share more details here? Any pictures? What are you asking for it?
I'd send you a message, but I'm new to using this forum so it won't allow me yet.
Thanks,
Tim
I'd send you a message, but I'm new to using this forum so it won't allow me yet.
Thanks,
Tim
#2037
Senior Member
Join Date: Apr 2006
Location: Washington County, Vermont, USA
Posts: 3,778
Bikes: 1966 Dawes Double Blue, 1976 Raleigh Gran Sport, 1975 Raleigh Sprite 27, 1980 Univega Viva Sport, 1971 Gitane Tour de France, 1984 Lotus Classique, 1976 Motobecane Grand Record
Mentioned: 77 Post(s)
Tagged: 0 Thread(s)
Quoted: 765 Post(s)
Liked 660 Times
in
351 Posts
Seeking a 32-tooth 86 BCD chainring, Sugino, SR, Stronglight, or whatever, ideally with minimal wear. I have assorted other 86 BCD rings in various sizes, including a some NOS Stronglights. Other trade goods as well.
__________________
www.redclovercomponents.com
"Progress might have been all right once, but it has gone on too long."
--Ogden Nash
www.redclovercomponents.com
"Progress might have been all right once, but it has gone on too long."
--Ogden Nash
#2038
Senior Member
Join Date: Dec 2005
Posts: 17,155
Mentioned: 481 Post(s)
Tagged: 0 Thread(s)
Quoted: 3809 Post(s)
Liked 6,683 Times
in
2,609 Posts
#2039
Senior Member
Join Date: Jan 2015
Location: Los Angeles
Posts: 4,703
Bikes: 82 Medici, 2011 Richard Sachs, 2011 Milwaukee Road
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 1947 Post(s)
Liked 2,010 Times
in
1,109 Posts
ISO 5 Speed Freewheel 14-24
Looking for a C&V 5 speed 14-24 FW for my 78 Raleigh. Something nice and used little that will match well with my Nuovo Gran Sport bike. I have for trade a cool set of vintage White Industry hubs. These hubs would be perfect for a 90s weight weenie build
__________________
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
Last edited by Classtime; 02-09-20 at 04:29 PM.
#2040
tantum vehi
Join Date: Jul 2008
Location: Flathead Valley, MT
Posts: 4,440
Bikes: More than I care to admit
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 1167 Post(s)
Liked 992 Times
in
491 Posts
Ummm, I have a 14-28 Suntour Perfect 5s FW, a 6s 14-24 and a 6s Shimano 6208 13-24 - Any of which you could have for $10 shipped... perhaps save those sick hubs for something of equal value?
__________________
1970 Gitane TdF; 1973 Gitane TdF
1979 Trek 710; 1981 Trek 412; 1981 Trek 710
1984 Specialized Stumpjumper Sport; 1985 Specialized Allez SE; 1988 Specialized Sirrus; 1989 Specialized Rock Combo
1984 Ross Mt. Hood
1988 Centurion Ironman Expert
1991 Bridgestone RB-1
1992 Serotta Colorado TG
2015 Elephant NFE
1979 Trek 710; 1981 Trek 412; 1981 Trek 710
1984 Specialized Stumpjumper Sport; 1985 Specialized Allez SE; 1988 Specialized Sirrus; 1989 Specialized Rock Combo
1984 Ross Mt. Hood
1988 Centurion Ironman Expert
1991 Bridgestone RB-1
1992 Serotta Colorado TG
2015 Elephant NFE
#2041
Senior Member
Join Date: Jan 2015
Location: Los Angeles
Posts: 4,703
Bikes: 82 Medici, 2011 Richard Sachs, 2011 Milwaukee Road
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 1947 Post(s)
Liked 2,010 Times
in
1,109 Posts
Thanks but I think a nice 5 speed Regina G.S. Corse SICC with a big 24 cog is equal value. I'm intending to keep my Competition G.S. 5 speed. Yes the hubs are real neat but I don't have a bike for them---I didn't think. But now you got me thinking.
__________________
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
Last edited by Classtime; 02-10-20 at 07:16 AM.
#2042
Total Scrounge
Join Date: Nov 2019
Location: Portland, Oregon
Posts: 884
Bikes: 71 International 72 Super Course 83 Gap
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 327 Post(s)
Liked 924 Times
in
310 Posts
Anybody interested in an Altenburger Synchron? I understand these were a very early dual pivot sidepull. Original pads! Found in a bag of bike parts at a g-sale.
#2043
tantum vehi
Join Date: Jul 2008
Location: Flathead Valley, MT
Posts: 4,440
Bikes: More than I care to admit
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 1167 Post(s)
Liked 992 Times
in
491 Posts
It wouldn’t be the first time a build started with a set of hubs in search of a frame...
__________________
1970 Gitane TdF; 1973 Gitane TdF
1979 Trek 710; 1981 Trek 412; 1981 Trek 710
1984 Specialized Stumpjumper Sport; 1985 Specialized Allez SE; 1988 Specialized Sirrus; 1989 Specialized Rock Combo
1984 Ross Mt. Hood
1988 Centurion Ironman Expert
1991 Bridgestone RB-1
1992 Serotta Colorado TG
2015 Elephant NFE
1979 Trek 710; 1981 Trek 412; 1981 Trek 710
1984 Specialized Stumpjumper Sport; 1985 Specialized Allez SE; 1988 Specialized Sirrus; 1989 Specialized Rock Combo
1984 Ross Mt. Hood
1988 Centurion Ironman Expert
1991 Bridgestone RB-1
1992 Serotta Colorado TG
2015 Elephant NFE
Likes For mountaindave:
#2044
Senior Member
Join Date: Jan 2015
Location: Los Angeles
Posts: 4,703
Bikes: 82 Medici, 2011 Richard Sachs, 2011 Milwaukee Road
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 1947 Post(s)
Liked 2,010 Times
in
1,109 Posts
Yes. Nice like that but with a 24. Or an earlier GS Corse that goes to 24. I'm hoping to avoid a 14 to 17 jump at the high end also.
__________________
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
Last edited by Classtime; 02-10-20 at 07:15 AM.
#2045
Senior Member
Why, why, why can they be not 170! Are there no 170 black Shimano 105 cranks !!
#2046
Phyllo-buster
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,846
Bikes: roadsters, club bikes, fixed and classic
Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2297 Post(s)
Liked 2,054 Times
in
1,254 Posts
#2047
Senior Member
Join Date: Sep 2011
Location: Baltimore MD
Posts: 3,332
Bikes: '72 Motobecane Grand Record, '72 Gitane tandem, '72 Raleigh Super Course, '73 Raleigh Gran Sport, '73 Colnago Super, '76 Fiorelli Coppi, '78 Raleigh SBDU Team Pro, '78 Trek 930, '81 Holdsworth Special 650B, '86 Masi GC, ’94 Bridgestone RB-T
Mentioned: 67 Post(s)
Tagged: 0 Thread(s)
Quoted: 786 Post(s)
Liked 519 Times
in
281 Posts
I've got an itch to try out one of those noddley old road bikes some people seem to love. Something with Reynolds 531c, Tange 1, or other standard diameter 8-5-8 or lighter tubed bike. Anyone have something lying around I could snag?
I ride my saddle height at 83.5cm for context, so I'd be looking for somewhere between 64-67cm frames.
If it's all beat up, that's probably better since I'm not sure I want to commit to something fancy. Hoping to find something for around $200ish
Let me know if you have anything or if you see something pop up.
Tim O.
Portland, OR
I ride my saddle height at 83.5cm for context, so I'd be looking for somewhere between 64-67cm frames.
If it's all beat up, that's probably better since I'm not sure I want to commit to something fancy. Hoping to find something for around $200ish
Let me know if you have anything or if you see something pop up.
Tim O.
Portland, OR
https://portland.craigslist.org/mlt/...065999005.html
__________________
The man who dies with the most toys…is dead. - Rootboy
The man who dies with the most toys…is dead. - Rootboy
#2048
Senior Member
Join Date: Jan 2015
Location: Los Angeles
Posts: 4,703
Bikes: 82 Medici, 2011 Richard Sachs, 2011 Milwaukee Road
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 1947 Post(s)
Liked 2,010 Times
in
1,109 Posts
#2050
Newbie
This is local, and would make a great little project.
https://portland.craigslist.org/mlt/...065999005.html
https://portland.craigslist.org/mlt/...065999005.html
That does look sweet! Actually, tonight I'm picking up a pristine 1981 trek 710. Thanks for sending this along!
Tim