Why change front shift cable as frequently as rear?
#1
Senior Member
Thread Starter
Why change front shift cable as frequently as rear?
As the title says. While starting to change my cables today I had this thought so I didn't change my front cable. If I don't go to the mountains I may easily go a couple weeks never in the small ring. The front doesn't get used. Call me lazy, but I happily did a half-assed job today.
#2
Senior Member
As the title says. While starting to change my cables today I had this thought so I didn't change my front cable. If I don't go to the mountains I may easily go a couple weeks never in the small ring. The front doesn't get used. Call me lazy, but I happily did a half-assed job today.
#3
Chases Dogs for Sport
I never, ever change my shift cables. Never adjust them, either. And my shifting is as crisp today as on the day I bought the bike.
(Yes, it's Di2, but I have to confess that one reason I ponied up the extra for Di2 was to avoid the annual / semi-annual ritual of replacing cables, re-wrapping bars, and adjusting derailleurs/cables. In other words, I COMPLETELY understand the desire to skip one cable replacement. I paid good money to do the same!)
(Yes, it's Di2, but I have to confess that one reason I ponied up the extra for Di2 was to avoid the annual / semi-annual ritual of replacing cables, re-wrapping bars, and adjusting derailleurs/cables. In other words, I COMPLETELY understand the desire to skip one cable replacement. I paid good money to do the same!)
#4
Senior Member
As the title says. While starting to change my cables today I had this thought so I didn't change my front cable. If I don't go to the mountains I may easily go a couple weeks never in the small ring. The front doesn't get used. Call me lazy, but I happily did a half-assed job today.
#5
Senior Member
Thread Starter
#6
Serious Cyclist
Join Date: Aug 2011
Location: RVA
Posts: 9,308
Bikes: Emonda SL6
Mentioned: 97 Post(s)
Tagged: 1 Thread(s)
Quoted: 5721 Post(s)
Liked 261 Times
in
99 Posts
I change the front cable when I change the housings as a matter of habit, but I've never noticed any issues with it and no fraying. It doesn't get used very frequently.
#7
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,712
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 140 Post(s)
Tagged: 1 Thread(s)
Quoted: 5781 Post(s)
Liked 2,577 Times
in
1,428 Posts
Cables break through metal fatigue as they bend on and off the lever drum. So, it's about how often you shift, and for most people that means the front cable should last 5-10 (or more) times as long as the rear.
I suspect that the FD cable will outlast the housing, which may fail from age, or physical abuse, so I'd leave it alone until I needed to replace the housing, at which time, I'd replace both.
I suspect that the FD cable will outlast the housing, which may fail from age, or physical abuse, so I'd leave it alone until I needed to replace the housing, at which time, I'd replace both.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
#8
Senior Member
Join Date: May 2008
Location: Zang's Spur, CO
Posts: 9,083
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 3375 Post(s)
Liked 5,513 Times
in
2,856 Posts
No need to buy them in a set.
Example: https://www.universalcycles.com/shop...7&category=673
Example: https://www.universalcycles.com/shop...7&category=673
#9
Senior Member
I had it happen on both 5700 and 6800. Yep, it always frays and breaks inside the shifter. I should really just learn my lesson and replace the rear cable every 3000 miles.
#10
Senior Member
Thread Starter
Same. What group do you have? I'm on 5700 and it eats the rear cable in the lever body. Always frays and fails just behind the cable anchor.
I change the front cable when I change the housings as a matter of habit, but I've never noticed any issues with it and no fraying. It doesn't get used very frequently.
I change the front cable when I change the housings as a matter of habit, but I've never noticed any issues with it and no fraying. It doesn't get used very frequently.
I do it b/c I don't want it to break on a fun group ride. A lot of my friends do the ride it till it breaks method but they always seem to end up breaking it during a ride that's important to them. So, I just change mine earlier. However, I do think I'm going to stop changing the front simply b/c I think that it's a waste.
#11
Serious Cyclist
Join Date: Aug 2011
Location: RVA
Posts: 9,308
Bikes: Emonda SL6
Mentioned: 97 Post(s)
Tagged: 1 Thread(s)
Quoted: 5721 Post(s)
Liked 261 Times
in
99 Posts
I do it b/c I don't want it to break on a fun group ride. A lot of my friends do the ride it till it breaks method but they always seem to end up breaking it during a ride that's important to them. So, I just change mine earlier. However, I do think I'm going to stop changing the front simply b/c I think that it's a waste.
If they broke at the end of a trainer session or something that would be nice.
#12
Senior Member
No need to buy them in a set.
Example: https://www.universalcycles.com/shop...7&category=673
Example: https://www.universalcycles.com/shop...7&category=673
DA SHIFT INNER CABLE
1.2X2000MM STAINLESS
Y60098900
#13
Senior Member
This is definitely murphy's law in action, can confirm. My 2 most recent cable breakages were on the first lap of a race that I felt pretty good about, and in the first 3 miles of my favorite Sunday group ride on a beautiful day.
If they broke at the end of a trainer session or something that would be nice.
If they broke at the end of a trainer session or something that would be nice.
but if not watch out for the first sign of funky shifting.
#14
Senior Member
Join Date: May 2008
Location: Zang's Spur, CO
Posts: 9,083
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 3375 Post(s)
Liked 5,513 Times
in
2,856 Posts
I've broken the rear shift cable once on a Campy-equipped road bike, and about three times on my Shimano-equipped foul-weather/touring bike.
The maddening thing is that every time it happens, I realize afterward that the shifting was getting crappy for about 20 miles prior, due to the frayed cable catching on the inside of the shifter. But I just thought it needed adjustment.
The maddening thing is that every time it happens, I realize afterward that the shifting was getting crappy for about 20 miles prior, due to the frayed cable catching on the inside of the shifter. But I just thought it needed adjustment.
#15
Senior Member
Join Date: Apr 2012
Location: Nor Cal
Posts: 6,016
Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 1814 Post(s)
Likes: 0
Liked 923 Times
in
569 Posts
I've got Red on the bike & I have never broken a cable on this bike. Actually the cables look good when I remove them.
I do it b/c I don't want it to break on a fun group ride. A lot of my friends do the ride it till it breaks method but they always seem to end up breaking it during a ride that's important to them. So, I just change mine earlier. However, I do think I'm going to stop changing the front simply b/c I think that it's a waste.
I do it b/c I don't want it to break on a fun group ride. A lot of my friends do the ride it till it breaks method but they always seem to end up breaking it during a ride that's important to them. So, I just change mine earlier. However, I do think I'm going to stop changing the front simply b/c I think that it's a waste.
I've got Red as well, & so thought I could ignore a reminder to change the cable, especially as I had inspected it a couple of times & seen no wear. It broke one or two rides later, but single-speed builds character, right?
#16
Chases Dogs for Sport
#17
Senior Member
Join Date: Jul 2002
Location: Sacramento, California, USA
Posts: 40,865
Bikes: Specialized Tarmac, Canyon Exceed, Specialized Transition, Ellsworth Roots, Ridley Excalibur
Mentioned: 68 Post(s)
Tagged: 0 Thread(s)
Quoted: 2952 Post(s)
Liked 3,106 Times
in
1,417 Posts
#19
Should Be More Popular
Join Date: Dec 2007
Location: Malvern, PA (20 miles West of Philly)
Posts: 43,051
Bikes: 1986 Alpine (steel road bike), 2009 Ti Habenero, 2013 Specialized Roubaix
Mentioned: 560 Post(s)
Tagged: 2 Thread(s)
Quoted: 22597 Post(s)
Liked 8,925 Times
in
4,158 Posts
Same. What group do you have? I'm on 5700 and it eats the rear cable in the lever body. Always frays and fails just behind the cable anchor.
I change the front cable when I change the housings as a matter of habit, but I've never noticed any issues with it and no fraying. It doesn't get used very frequently.
I change the front cable when I change the housings as a matter of habit, but I've never noticed any issues with it and no fraying. It doesn't get used very frequently.
#20
Should Be More Popular
Join Date: Dec 2007
Location: Malvern, PA (20 miles West of Philly)
Posts: 43,051
Bikes: 1986 Alpine (steel road bike), 2009 Ti Habenero, 2013 Specialized Roubaix
Mentioned: 560 Post(s)
Tagged: 2 Thread(s)
Quoted: 22597 Post(s)
Liked 8,925 Times
in
4,158 Posts
Agree. I should probably just change RD cable every time I change the chain, I get about 3000ish miles from a chain.
#22
Senior Member
Join Date: Jul 2002
Location: Sacramento, California, USA
Posts: 40,865
Bikes: Specialized Tarmac, Canyon Exceed, Specialized Transition, Ellsworth Roots, Ridley Excalibur
Mentioned: 68 Post(s)
Tagged: 0 Thread(s)
Quoted: 2952 Post(s)
Liked 3,106 Times
in
1,417 Posts
Yeah, unfortunately that wasn't an option, and my team car was too far back in the caravan . It basically became a challenge to try to stay attached to the main group as long as possible.
#24
Senior Member
I change them when they break. My '92 Campy Chorus group ate front derailleur cables but not rear. I guess it depends on which group eats which cables.
#25
Senior Member
Join Date: Mar 2013
Location: Tucson Az
Posts: 1,678
Bikes: 2015 Ridley Fenix, 1983 Team Fuji, 2019 Marin Nail Trail 6
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 337 Post(s)
Liked 228 Times
in
138 Posts
I don't even remember the last time I changed shift cables, but now that I'm using Sram Force shifters, I'm hoping for the same durability.