Wheelset budget $1500, middle aged fat guy
#1
Junior Member
Thread Starter
Join Date: Jun 2014
Posts: 19
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 12 Post(s)
Likes: 0
Liked 2 Times
in
1 Post
Wheelset budget $1500, middle aged fat guy
Building a custom bike from a local frame builder. Need a bit of advice on a wheelset. Budget is $1500, I live in Houston, known for its eclectic road surface. Its not uncommon to ride butter smooth black top, chip-n-seal, and pot hole riddled streets all on the same ride.
What wheelset would you recommend for a 215lbs rider in the mean streets of Houston?
p.s. running discs and SRAM red on a steel bike.
-JB
What wheelset would you recommend for a 215lbs rider in the mean streets of Houston?
p.s. running discs and SRAM red on a steel bike.
-JB
#2
Should Be More Popular
Join Date: Dec 2007
Location: Malvern, PA (20 miles West of Philly)
Posts: 43,096
Bikes: 1986 Alpine (steel road bike), 2009 Ti Habenero, 2013 Specialized Roubaix
Mentioned: 560 Post(s)
Tagged: 2 Thread(s)
Quoted: 22639 Post(s)
Liked 8,953 Times
in
4,173 Posts
#3
Senior Member
Join Date: Jan 2010
Location: TC, MN
Posts: 39,520
Bikes: R3 Disc, Haanjo
Mentioned: 354 Post(s)
Tagged: 1 Thread(s)
Quoted: 20810 Post(s)
Liked 9,456 Times
in
4,672 Posts
The previously mentioned HEDs are a good option as are other wheelsets with rims that are on the wide side. Wider rims get more volume out of the same tire vs a skinnier rim, which allows you to run slightly lower pressures, which can make a noticable difference in comfort for a big guy that would normally have to run high pressure to avoid pinch flats.
Are the subject of wide tires, what kind of tire clearance is your builder going to give you? At this point, I want to be able to clear 28-30mm tires with any future bikes.
Are the subject of wide tires, what kind of tire clearance is your builder going to give you? At this point, I want to be able to clear 28-30mm tires with any future bikes.
#5
your god hates me
Join Date: Apr 2006
Posts: 4,596
Bikes: 2016 Richard Sachs, 2010 Carl Strong, 2006 Cannondale Synapse
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1270 Post(s)
Liked 1,305 Times
in
720 Posts
With just that information, the answer should be: Get a custom wheelset from a local wheelbuilder.
Of course, make sure they have a stellar reputation. (You're in Texas? Call Joe Young right now!) But presuming they're an experienced professional wheelbuilder with a stellar reputation (did I mention Joe Young) just tell him what sort of bike it is, what sort of riding you do, what you weigh, and what your expectations for a wheelset are...and let them spec and build.
Of course, make sure they have a stellar reputation. (You're in Texas? Call Joe Young right now!) But presuming they're an experienced professional wheelbuilder with a stellar reputation (did I mention Joe Young) just tell him what sort of bike it is, what sort of riding you do, what you weigh, and what your expectations for a wheelset are...and let them spec and build.
#6
Senior Member
Join Date: Mar 2010
Location: Seattle, WA
Posts: 23,208
Mentioned: 89 Post(s)
Tagged: 0 Thread(s)
Quoted: 18883 Post(s)
Liked 10,646 Times
in
6,054 Posts
I'd probably have wheels built from Chinese carbon rims at whatever your chosen depth is. Get the rims from a reputable dealer, lots of people have been doing that for years; disc brakes eliminate the main safety concern. I don't know that they would be better than, say, the Ardennes recommended above, but they wouldn't be worse, and the carbon would be "blingy."
#7
Junior Member
Thread Starter
Join Date: Jun 2014
Posts: 19
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 12 Post(s)
Likes: 0
Liked 2 Times
in
1 Post
Looking at the Ardennes Plus SL spec, approved for light XC use, beastly wheels.
Any suggestions for dealers?
Filling out his for right now.
I'd probably have wheels built from Chinese carbon rims at whatever your chosen depth is. Get the rims from a reputable dealer, lots of people have been doing that for years; disc brakes eliminate the main safety concern. I don't know that they would be better than, say, the Ardennes recommended above, but they wouldn't be worse, and the carbon would be "blingy."
With just that information, the answer should be: Get a custom wheelset from a local wheelbuilder.
#8
Senior Member
Join Date: Mar 2010
Location: Seattle, WA
Posts: 23,208
Mentioned: 89 Post(s)
Tagged: 0 Thread(s)
Quoted: 18883 Post(s)
Liked 10,646 Times
in
6,054 Posts
I think Yoleo and Far Sports are two that have a lot of positive customer reviews. I haven't used them personally, hopefully somebody else will come along and say more. See this thread for an eample.
#9
Sunshine
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,657
Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo
Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 11012 Post(s)
Liked 7,546 Times
in
4,218 Posts
Middle aged fat guy.
Flat riding.
Not smooth riding.
Cut your budget in half and have a nice 28/32h wheelset built with butted spokes on any number of rims that are about 28mm deep and 23mm wide.
Flat riding.
Not smooth riding.
Cut your budget in half and have a nice 28/32h wheelset built with butted spokes on any number of rims that are about 28mm deep and 23mm wide.
#10
Senior Member
Join Date: Jan 2010
Location: TC, MN
Posts: 39,520
Bikes: R3 Disc, Haanjo
Mentioned: 354 Post(s)
Tagged: 1 Thread(s)
Quoted: 20810 Post(s)
Liked 9,456 Times
in
4,672 Posts
#11
Senior Member
Join Date: Oct 2004
Location: CA SF Bay Area
Posts: 476
Bikes: 2014 CDale EVO, 2007 System Six, 2004 Litespeed Solano, 2002 Burley Duet
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 92 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Belgium or Pacenti rims laced to DT Swiss hubs.
#12
Senior Member
Join Date: Dec 2007
Location: NWNJ
Posts: 3,704
Bikes: Road bike is a Carbon Bianchi C2C & Grandis (1980's), Gary Fisher Mt Bike, Trek Tandem & Mongoose SS MTB circa 1992.
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 722 Post(s)
Liked 353 Times
in
226 Posts
Building a custom bike from a local frame builder. Need a bit of advice on a wheelset. Budget is $1500, I live in Houston, known for its eclectic road surface. Its not uncommon to ride butter smooth black top, chip-n-seal, and pot hole riddled streets all on the same ride.
What wheelset would you recommend for a 215lbs rider in the mean streets of Houston?
p.s. running discs and SRAM red on a steel bike.
-JB
What wheelset would you recommend for a 215lbs rider in the mean streets of Houston?
p.s. running discs and SRAM red on a steel bike.
-JB
#13
Slacker
Join Date: May 2009
Location: North Orange County, in Southern California
Posts: 1,295
Bikes: 1986 Peugeot Orient Express, 1987 Trek 560 Pro, 1983 SR Semi Pro, 2010 Motobecane Le Champion Titanium, 2011 Trek Fuel EX8
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 97 Post(s)
Liked 6 Times
in
4 Posts
#14
Life is good
Join Date: Jan 2001
Location: Not far from the Withlacoochee Trail. 🚴🏻
Posts: 18,209
Bikes: 2018 Lynskey Helix Pro
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 522 Post(s)
Likes: 0
Liked 10 Times
in
10 Posts
I got a pair of custom wheels from PSIMet.com 2 years ago. Still love them. You can email them all your requirements and they'll recommend options they think you'll be happy with.
He's also a Bike Forums member.
He's also a Bike Forums member.
__________________
The Lord is merciful and gracious, slow to anger and abounding in steadfast love. - Psalm 103:8
I am a cyclist. I am not the fastest or the fittest. But I will get to where I'm going with a smile on my face.
The Lord is merciful and gracious, slow to anger and abounding in steadfast love. - Psalm 103:8
I am a cyclist. I am not the fastest or the fittest. But I will get to where I'm going with a smile on my face.
#15
Super Moderator
Join Date: Jul 2004
Location: Ffld Cnty Connecticut
Posts: 21,846
Bikes: Old Steelies I made, Old Cannondales
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1174 Post(s)
Liked 935 Times
in
618 Posts
Yup. $1500 for a pair of wheels is just silly.
__________________
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.
FYI: https://www.bikeforums.net/forum-sugg...ad-please.html
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.
FYI: https://www.bikeforums.net/forum-sugg...ad-please.html
#16
Full Member
DT swiss makes a great set of somewhat heavy ER1600 DB wheels 32mm deep and are rated by DT for a 260lbs of bike and rider to take 6" drops. I've been using them for a year (R32 name then) and they're great. Can be found for $400/set. They come with adapters for everything, so you can usually make $100 back selling the unneeded adapters. At 1800g, they're a bit heavy, at 32mm deep V shape, they're only a bit aero, but they are they are high quality and the best deal you're going to find until you're over $900 and get the AL33 rim or cheap carbon wheels.
If you want to go higher end, I'd look HED for a heavier guy build (250rider limit on the 24/24 db wheels). These are about as aero ag you're going to get for everyday wheels, CHEAP, and quality. These are 50% off right new -https://www.backcountry.com/hed-jet-4-plus-black-disc-brake-wheelset-clincher?CMP_SKU=HED002P&MER=0406&skid=HED002P-BK-S12X10012X142TA&mr:trackingCode=E5D5CCF3-21CA-E711-8102-005056944E17&mr:referralID=NA&mr:device=c&mr:adType=plaonline&CMP_ID=PLA_GOc001&utm_source=Google&ut m_medium=PLA&k_clickid=325a178c-772e-449e-9ba9-2a5556c1bf1d&rmatt=tsid:1042790|cid:213415837|agid:13362825397|tidla-368054870839|crid:92885919277|nw:g|rnd:15417505546741920595|dvc:c|adp:1o1|mt:|loc:9021470&gclid=EAIa IQobChMIxM6VhMur2gIViIuzCh2dBA7bEAQYASABEgJvwvD_BwE
Most disc wheelsets are already strong enough for a bigger dude.
If you want to go higher end, I'd look HED for a heavier guy build (250rider limit on the 24/24 db wheels). These are about as aero ag you're going to get for everyday wheels, CHEAP, and quality. These are 50% off right new -https://www.backcountry.com/hed-jet-4-plus-black-disc-brake-wheelset-clincher?CMP_SKU=HED002P&MER=0406&skid=HED002P-BK-S12X10012X142TA&mr:trackingCode=E5D5CCF3-21CA-E711-8102-005056944E17&mr:referralID=NA&mr:device=c&mr:adType=plaonline&CMP_ID=PLA_GOc001&utm_source=Google&ut m_medium=PLA&k_clickid=325a178c-772e-449e-9ba9-2a5556c1bf1d&rmatt=tsid:1042790|cid:213415837|agid:13362825397|tidla-368054870839|crid:92885919277|nw:g|rnd:15417505546741920595|dvc:c|adp:1o1|mt:|loc:9021470&gclid=EAIa IQobChMIxM6VhMur2gIViIuzCh2dBA7bEAQYASABEgJvwvD_BwE
Most disc wheelsets are already strong enough for a bigger dude.
Last edited by jfranci3; 04-08-18 at 03:20 PM.
#17
Senior Member
I picked up a set of Ardennes + LT for less than half of your budget. Fantastic set of wheels, I usually build my own but it ended up being cheaper to just buy them already built.
#18
Advocatus Diaboli
Join Date: Feb 2015
Location: Wherever I am
Posts: 8,656
Bikes: Merlin Cyrene, Nashbar steel CX
Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
Quoted: 4756 Post(s)
Liked 1,537 Times
in
1,006 Posts
#19
Full Member
I can vouch for the Ardennes I have the stallion edition and am a little heavier at 230 pounds. They ride really good and after 10.000 thousand miles still as true as day one not one complaint here
#20
Junior Member
Join Date: Sep 2008
Posts: 6
Bikes: Lemond TSX, Madone 5.5
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I'm a little bit lighter at 190lbs. I've been running a H+ Son Archetype rear with DT Swiss 350 hub for a few years now that's been great. I just bought a new wheelset using Archetype on front (DT Swiss 350) and rear with a Powertap G3. The wheelset came in at about $800.
I had considered the HED Belgium Plus rim for these. It seems very similar to the Archetype, but a lot more expensive. The only advantage I saw for the HED rim was that it supports tubeless and the Archetype does not. I don't have any plans going tubeless so I stuck with the rim I had experience with.
I had considered the HED Belgium Plus rim for these. It seems very similar to the Archetype, but a lot more expensive. The only advantage I saw for the HED rim was that it supports tubeless and the Archetype does not. I don't have any plans going tubeless so I stuck with the rim I had experience with.
#21
Senior Member
Join Date: Mar 2013
Location: Tucson Az
Posts: 1,689
Bikes: 2015 Ridley Fenix, 1983 Team Fuji, 2019 Marin Nail Trail 6
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 343 Post(s)
Liked 240 Times
in
143 Posts
Another Hed Ardennes voter here.
I bought a pair of LT's a couple of years ago, and they have been absolutely trouble free in over 5k miles. I put some 25mm Conti GP4k SII's on them,which measure out to 27 or 28, and the combination has been great.
During that time, I've spent about half of it over the 225lb recommended weight limit.
I bought a pair of LT's a couple of years ago, and they have been absolutely trouble free in over 5k miles. I put some 25mm Conti GP4k SII's on them,which measure out to 27 or 28, and the combination has been great.
During that time, I've spent about half of it over the 225lb recommended weight limit.
#22
Senior Member
Join Date: May 2010
Location: Pittsburgh, PA
Posts: 2,435
Bikes: Colnago, Cervelo, Scott
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 191 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Call HED directly and order stallion build. They will make them for you and ship them to your door and probably give you a nice wheelbag at a discount too if you ask nicely.
#23
Senior Member
Join Date: Jun 2014
Location: Houston TX
Posts: 282
Bikes: 2018 Diamondback Podium Equipe Dura Ace Disc, 2013 Felt z85 (now a frankenbike,) 1994 Serotta Colorado TG, 1999 Lemond Buenos Aires, 2017 State Undefeated II Track Bike, 2005 Litespeed Tuscany project
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 29 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
ROL wheels. They have many options in your price range. I too am a big dude (245 lbs) and am also in Houston where I ride 5k per year. My ROLs have never even pinged. They make sets specifically for bigger dudes that don't sacrifice much weight. Plus, Sean, the main guy at the company is super personable.
#24
Senior Member
Join Date: Jul 2007
Posts: 7,570
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 1852 Post(s)
Liked 679 Times
in
430 Posts
Given your weight and concerns about road quality, I'd go with a custom build with a higher spoke count.
I'm thinking something like DT240, White Ind. or even CK R45 hubs with 24-28 spokes in the front and 28-32 in the back laced to a Hed Belgium or Kinlin rim. I'd skip Pacenti - due to poor experiences in the past.
They will look nice and hold up. They won't be the lightest or most aero or most pro looking, but they will be solid.
I'm thinking something like DT240, White Ind. or even CK R45 hubs with 24-28 spokes in the front and 28-32 in the back laced to a Hed Belgium or Kinlin rim. I'd skip Pacenti - due to poor experiences in the past.
They will look nice and hold up. They won't be the lightest or most aero or most pro looking, but they will be solid.
#25
Junior Member
Join Date: Jul 2012
Posts: 77
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 4 Times
in
4 Posts
I weigh 200 and have a set of Boyd Altamonts. They are a great wheel set at half the cost of your budget. You could splurge and go with their ceramic altamonts or switch to White Industries hubs on these wheels. By the way I have 28/32. Boyds are great and service is wonderful.