ISO 7800 and Mavic
#4
Cat 6
Join Date: Dec 2007
Location: Mountain Brook, AL
Posts: 7,519
Mentioned: 27 Post(s)
Tagged: 0 Thread(s)
Quoted: 500 Post(s)
Liked 183 Times
in
118 Posts
Found in Mavic, but I don't think they're the same as the SL's
I did see a couple loose silver flat blade straight-pulls, but I didn't measure yet.
7800 - well I know I have an Ultegra 10s cassette IIRC 11-23 I'd sell for $15 + ship. Edit it's an 11-28.
- Length: 283mm
- Stainless steel bladed spokes with nipples
- For Mavic Ksyrium Elite front wheel
- Part # M40654
I did see a couple loose silver flat blade straight-pulls, but I didn't measure yet.
7800 - well I know I have an Ultegra 10s cassette IIRC 11-23 I'd sell for $15 + ship. Edit it's an 11-28.
Last edited by Ex Pres; 11-27-20 at 10:07 PM.
#5
Banned.
Thread Starter
Join Date: Dec 2007
Posts: 27,297
Mentioned: 34 Post(s)
Tagged: 1 Thread(s)
Quoted: 378 Post(s)
Liked 1,407 Times
in
908 Posts
Spokes won't work, but thanks, Mr. C.
I have a set of Ksyrium Elites I offered the guy if he didn't think he could find a spoke and nipple.
He declined.
For some reason, these are more silver/grey than polished, and very wide.
Beefy, even.
He took the wheel to a shop; they used the plastic Mavic tool on the nipple, and of course, ground it off, then used a lineman's pliers, and of course, ruined it.
I don't think the spoke looks that bad, but he's definitely gonna need a nipple.
As for the rings, he really needs to go new.... 14 years on the front ring...and it's literally razor-sharp where the formerly tooth-shaped protrusions are.
I told him I'd look at my cassettes. Fortunately, the freehub on that Mavic is splined 1mm... I used to love DA cassettes; now they are short of teeth!
I'll update in a few days.
I have a set of Ksyrium Elites I offered the guy if he didn't think he could find a spoke and nipple.
He declined.
For some reason, these are more silver/grey than polished, and very wide.
Beefy, even.
He took the wheel to a shop; they used the plastic Mavic tool on the nipple, and of course, ground it off, then used a lineman's pliers, and of course, ruined it.
I don't think the spoke looks that bad, but he's definitely gonna need a nipple.
As for the rings, he really needs to go new.... 14 years on the front ring...and it's literally razor-sharp where the formerly tooth-shaped protrusions are.
I told him I'd look at my cassettes. Fortunately, the freehub on that Mavic is splined 1mm... I used to love DA cassettes; now they are short of teeth!
I'll update in a few days.