How to remove this freewheel? Older Shimano 333
#1
.
Thread Starter
Join Date: Oct 2007
Location: New England
Posts: 58
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
How to remove this freewheel? Older Shimano 333
Anyone know how to remove this freewheel? (see photo) It has 12 splines, but it's about 20mm in diameter where the splines are, which is just a tad too small for my Park FR-1 tool. This is on a random bike I have from circa mid 80s, as far as I can discern.
#2
Call me The Breeze
Just gotta find the right tool
#3
.
Thread Starter
Join Date: Oct 2007
Location: New England
Posts: 58
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Does anyone know of any good places on line that might sell such a tool? I haven't found it in trying a few google searches.
#4
Thrifty Bill
Join Date: Jan 2008
Location: Mountains of Western NC
Posts: 23,526
Bikes: 86 Katakura Silk, 87 Prologue X2, 88 Cimarron LE, 1975 Sekai 4000 Professional, 73 Paramount, plus more
Mentioned: 96 Post(s)
Tagged: 0 Thread(s)
Quoted: 1236 Post(s)
Liked 965 Times
in
629 Posts
I had a similar one on my 1987 Trek. I took it to a bike shop, and they removed it no charge. Also, I had another freewheel today that I was looking for the right tool. The local bike shop just put the freewheel in a vise (not too tight) and spun the wheel off. No special tool was used. I am not recommending this method, but it sure worked.
#5
Senior Member
Join Date: Oct 2006
Location: Outside..somewhere
Posts: 433
Bikes: Fuji, Specialized, Cannondale, Columbia
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
https://www.parktool.com I t looks like it might be the FR-5. In any event try your LBS and they usually are willing to help.
#6
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,096 Times
in
742 Posts
You really can't do that. A vise can't clamp onto the stationary core of a freewheel unless you completely disassemble the freewheel. I expect the shop had the correct removal tool clamped in the vise and just placed the wheel over it and used the rim to spin off the freewheel. This is a common technique.
#7
Senior member
Join Date: Oct 2004
Location: Oakville Ontario
Posts: 8,122
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 945 Post(s)
Liked 659 Times
in
372 Posts
Alternatively, if you are replacing it with an up to date version, you can remove it destructively. The easiest way I have found (if you have access to a welder,) is tack several welds where the sprocket rotates on the hub of the freewheel, and then just crank it off with a chain whip. Otherwise, it's dissassemble the freewheel and take a pipe wrench (or vise) to the inner hub.
#8
Senior Member
Join Date: Aug 2007
Location: Monterey, California
Posts: 539
Bikes: 1982 Fuji Team, 1979 Raleigh Team Record, 1984 Raleigh Team USA, Japanese Raleigh Super Course, 2000 LeMond Buenos Aires, 90's Schwinn High Plains, 1978? Austro Daimler Inter 10
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
https://www.parktool.com I t looks like it might be the FR-5. In any event try your LBS and they usually are willing to help.
#9
Gone, but not forgotten
Join Date: Jul 2002
Location: Newtonville, Massachusetts
Posts: 2,301
Bikes: See: https://sheldonbrown.org/bicycles
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 24 Post(s)
Likes: 0
Liked 6 Times
in
5 Posts
The FR-5 is for newer Shimano freewheels, 23.5 mm diameter.
The O.P. needs this model: https://harriscyclery.net/itemdetails.cfm?ID=569 20 mm diameter.
If the O.P. just needs to remove it to discard it and upgrade to a newer freewheel, it doesn't make sense to buy the tool, rather, remove the freewheel by destruction. This is explained at https://sheldonbrown.com/freewheels
Sheldon "Freewheels" Brown
#11
Gone, but not forgotten
Join Date: Jul 2002
Location: Newtonville, Massachusetts
Posts: 2,301
Bikes: See: https://sheldonbrown.org/bicycles
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 24 Post(s)
Likes: 0
Liked 6 Times
in
5 Posts
I like good microbrew beer, but don't drink at the shop.
Sheldon "IPA" Brown
Code:
+----------------------------------------------------+ | If you don't yet know Benjamin Britten's | | Serenade for Tenor, Horn and Strings | | You're in for a treat! https://tinyurl.com/2fjx7r | +----------------------------------------------------+
#12
Senior Member
Join Date: Aug 2007
Location: Monterey, California
Posts: 539
Bikes: 1982 Fuji Team, 1979 Raleigh Team Record, 1984 Raleigh Team USA, Japanese Raleigh Super Course, 2000 LeMond Buenos Aires, 90's Schwinn High Plains, 1978? Austro Daimler Inter 10
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#13
Squirrel
The first part of this is good advice. However, most of us in the biz prefer to be paid in actual money. ;-)
I like good microbrew beer, but don't drink at the shop.
Sheldon "IPA" Brown
I like good microbrew beer, but don't drink at the shop.
Sheldon "IPA" Brown
Code:
+----------------------------------------------------+ | If you don't yet know Benjamin Britten's | | Serenade for Tenor, Horn and Strings | | You're in for a treat! https://tinyurl.com/2fjx7r | +----------------------------------------------------+
__________________
#14
.
Thread Starter
Join Date: Oct 2007
Location: New England
Posts: 58
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanks everyone. Hmm, maybe a new freewheel isn't a bad idea. Was planning on spending as little as possible on this bike since I only paid $15 for it, but I guess a cheap one would be equal to or better than the one that's already on there. And I'd have to buy the tool. I don't think I searched Harris cyclery, duh, thanks Sheldon!
Last edited by TheFool; 01-18-08 at 03:27 PM.
#15
Senior Member
Join Date: Apr 2007
Location: Chili, NY
Posts: 733
Bikes: 88 Fisher Gemini tandem, 92 Trek 970, 07 Nashbar Frame, 08 Gary Fisher Paragon
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I always wondered about this. I keep reading posts of guys sauntering into their bike shops loaded with beer, and all my bike techs look more like herbal tea drinkers! I thought of bringing cookies, but I'm not even sure those would be welcome. So I've stuck to paying them (or offering to, or buying something) every time I bother them.
You'd be surprised at what folks will do for drink or food!
One of our saucier customers brought us in some very expensive Petit Fours at Christmas time. I've never seen a bunch of guys wolf those down in NO time! Very SWEET with some nice Liqueur in them.
Chris
#16
Gone, but not forgotten
Join Date: Jul 2002
Location: Newtonville, Massachusetts
Posts: 2,301
Bikes: See: https://sheldonbrown.org/bicycles
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 24 Post(s)
Likes: 0
Liked 6 Times
in
5 Posts
I always wondered about this. I keep reading posts of guys sauntering into their bike shops loaded with beer, and all my bike techs look more like herbal tea drinkers! I thought of bringing cookies, but I'm not even sure those would be welcome. So I've stuck to paying them (or offering to, or buying something) every time I bother them.
The thing with tips, either cash or comestibles is kinda tricky. Sometimes a tip will get your job bumped up out of turn in the rotation, which isn't particularly fair to whoever gets bumped so the wrench can fix your problem. However, sometimes there's some slack time and this can be reasonable, if the job pushed aside is not also time-sensitive.
If it's done as a freebie and then you give the mechanic money, that can create an ethical issue. The mechanic may be justified in doing a freebie for the sake of good will for the shop, but if you wind up paying the mechanic and he/she pockets the money, it means, in a sense, that the mechanic is ripping off his/her employer, because the employer is paying for the mechanic's time.
This is not to say that tips or goodies are never appropriate, just to express appreciation for a job well done, or for service above and beyond the call of duty.
Although bike mechanics are chronically underpaid, they never expect tips, so you should never feel under any obligation to offer one.
Sheldon "Not Like Cab Drivers" Brown
#17
Sunrise Cyclery
Join Date: Jan 2008
Location: Minneapolis MN.
Posts: 17
Bikes: Santana, Raliegh Sports,Trek 950,Bridgestone CB-Zip.Steamroller.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
pay yer mech w/ something other than cash
Not that I would actually dis agree w/ Mr Brown....
But,
If you go to yer LBS and the shop is pretty small ( 85% of shops in the USA are one man shops making less than $500,000 gross a year thats 3000 shops btw),chances are yer talkin to THE guy/gal
who owns it.
so if ya give us cash and we pocket it the only one were rippin off is the Guvnor' in unreported taxable income.
Sheldon is correct though,Tips are never to be expected,but earned,or given freely remember a tip is
To Insure Prompt Service.
But is most commonally used as a reward for exceptional service nowadays,nad rewards can come in various forms.
I used to have a sign that said
I work for
Blondes
Brunettes
and
Redheads
People too.
I'm with Sheldon though no Drinky during office hours.
But,
If you go to yer LBS and the shop is pretty small ( 85% of shops in the USA are one man shops making less than $500,000 gross a year thats 3000 shops btw),chances are yer talkin to THE guy/gal
who owns it.
so if ya give us cash and we pocket it the only one were rippin off is the Guvnor' in unreported taxable income.
Sheldon is correct though,Tips are never to be expected,but earned,or given freely remember a tip is
To Insure Prompt Service.
But is most commonally used as a reward for exceptional service nowadays,nad rewards can come in various forms.
I used to have a sign that said
I work for
Blondes
Brunettes
and
Redheads
People too.
I'm with Sheldon though no Drinky during office hours.
#18
Gone, but not forgotten
Join Date: Jul 2002
Location: Newtonville, Massachusetts
Posts: 2,301
Bikes: See: https://sheldonbrown.org/bicycles
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 24 Post(s)
Likes: 0
Liked 6 Times
in
5 Posts
If you go to yer LBS and the shop is pretty small ( 85% of shops in the USA are one man shops making less than $500,000 gross a year thats 3000 shops btw),chances are yer talkin to THE guy/gal
who owns it.
so if ya give us cash and we pocket it the only one were rippin off is the Guvnor' in unreported taxable income.
who owns it.
so if ya give us cash and we pocket it the only one were rippin off is the Guvnor' in unreported taxable income.
Maybe she was wrong, I dunno.
Sheldon "Old School" Brown
#19
cyclist/gearhead/cycli...
Join Date: Oct 2004
Location: DC / Maryland suburbs
Posts: 4,166
Bikes: Homebuilt tourer/commuter, modified-beyond-recognition 1990 Trek 1100, reasonably stock 2002-ish Gary Fisher Hoo Koo E Koo
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
You really can't do that. A vise can't clamp onto the stationary core of a freewheel unless you completely disassemble the freewheel. I expect the shop had the correct removal tool clamped in the vise and just placed the wheel over it and used the rim to spin off the freewheel. This is a common technique.
A freewheel will just spin if you try to clamp the cogs.
I don't understand all the fuss here. You just put the appropriate tool in the vise, pointing up, lay the wheel on top of it, engaging the tool and crank on the wheel... works like a charm. Honestly this is a common-as-dirt operation
#20
Senior Member
Join Date: Apr 2005
Location: Springfield, Ohio
Posts: 297
Bikes: '06 Raleigh Cadent road bike,'05 Trek 7200 hybrid,' 83 Schwinn Le Tour SS conversion
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Funny thing, quite a coincidence, I just had a freewheel like the one originally described here removed at the LBS yesterday. The took about two minutes to do it and it only cost me $2.00. I had bought the wrong freewheel remover, but I think that I can use it on another bike later.
#21
hobby-ist
Join Date: Jun 2005
Location: Chicago, Suburbs
Posts: 357
Bikes: Schwinn WorldSport, Schwinn LeTour, Jamis Crosscountry, Litespeed Saber,
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
older shops are more likely to have the correct tool.
a new shop may not have that little rascal 'cause Park stops making or distributing tools for older / models.
a new shop may not have that little rascal 'cause Park stops making or distributing tools for older / models.
#22
Senior Member
Join Date: Jun 2002
Location: Rural Missouri - mostly central and southeastern
Posts: 3,014
Bikes: 2003 LeMond -various other junk bikes
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 79 Post(s)
Likes: 0
Liked 45 Times
in
36 Posts
Why would anyone even want to service the freewheel or hub, as I remember things, "333s" were 5spd cog sets usually installed on steel-hubs?
Not that it matters, but there's some chance someone in a hurry to remove that freewheel, even using the correct tool - will end up stripping/damaging the freewheel body or tool or both. This freewheel removal design wasn't exactly the height of Shimano's technical acumen.
Not that it matters, but there's some chance someone in a hurry to remove that freewheel, even using the correct tool - will end up stripping/damaging the freewheel body or tool or both. This freewheel removal design wasn't exactly the height of Shimano's technical acumen.
#23
Gone, but not forgotten
Join Date: Jul 2002
Location: Newtonville, Massachusetts
Posts: 2,301
Bikes: See: https://sheldonbrown.org/bicycles
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 24 Post(s)
Likes: 0
Liked 6 Times
in
5 Posts
Right.
The problem is the availability of the "appropriate tool" for a freewheel design that was discontinued 25 or 30 years ago.
That's not true in this case, because it is a splined tool, not one of the old two-prong type. The splined remover systems were a HUGE improvement over the two-prong freewheels that Europe was producing at this time.
Shimano deserves major credit for pioneering splined freewheel remover interfaces. You're being unjust in slagging them on this particular issue.
Sheldon "Splines Are Good" Brown
Not that it matters, but there's some chance someone in a hurry to remove that freewheel, even using the correct tool - will end up stripping/damaging the freewheel body or tool or both. This freewheel removal design wasn't exactly the height of Shimano's technical acumen.
Shimano deserves major credit for pioneering splined freewheel remover interfaces. You're being unjust in slagging them on this particular issue.
Sheldon "Splines Are Good" Brown
#24
cyclist/gearhead/cycli...
Join Date: Oct 2004
Location: DC / Maryland suburbs
Posts: 4,166
Bikes: Homebuilt tourer/commuter, modified-beyond-recognition 1990 Trek 1100, reasonably stock 2002-ish Gary Fisher Hoo Koo E Koo
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
I agree completely! I recently had to remove a Suntour 2-prong freewheel, and boy was that a hassle. Actually getting the freewheel off isn't too hard as long as you apply a lot of vertical pressure on the tool... but finding a tool that isn't worn out is tough!!! The two prongs get quickly worn down into useless little nubs, presumably because the pressure is distributed over such a small area.
#25
hobby-ist
Join Date: Jun 2005
Location: Chicago, Suburbs
Posts: 357
Bikes: Schwinn WorldSport, Schwinn LeTour, Jamis Crosscountry, Litespeed Saber,
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
I think it helps to put the Axle nut on over the tool, then apply pressure with a long handled wrench, instead of trying to use a vise.
Likes For peterbarson: