How Many Degrees Will a HT Lug Bend Answered
#1
Senior Member
Thread Starter
How Many Degrees Will a HT Lug Bend Answered
Like the wise old owl in the Tootsie Pop commercial was asked, "How many degrees will a head tube lug bend", the answer came with a catastrophic answer: 1.5 degrees. Tried to move the bend just a little more after hogging out material from inside the lug and the lug distorted and is all out of wack now. Time to get a replacement. Hope Henry James has one more left laying around!
Now the world knows how far to push it.
Now the world knows how far to push it.
#2
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,784
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3587 Post(s)
Liked 3,400 Times
in
1,934 Posts
You'd probably have better luck bending lugs if you used stamped lugs rather than investment cast lugs like the Henry James.
#3
Senior Member
Thread Starter
Yes, a stamped lug will surely bend easier than a cast lug, however the Henry James lugs are just about perfect to my eye. Thin and nicely cast, they clean up easily. It is a shame they are done with their lug business. Fortunately they still have a few left and one arrived today.
Already planning the next frame and am considering lugs. Any made in USA?
Already planning the next frame and am considering lugs. Any made in USA?
#4
Randomhead
Join Date: Aug 2008
Location: Happy Valley, Pennsylvania
Posts: 24,396
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 3,696 Times
in
2,517 Posts
Pretty sure HJ was the one and only U.S. made lug in recent years. You might find NOS lugs that someone else had cast, but I'm not sure who that would be.
#6
Randomhead
Join Date: Aug 2008
Location: Happy Valley, Pennsylvania
Posts: 24,396
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 3,696 Times
in
2,517 Posts
Pretty sure the Nova lugs are from Long Shen. I have gotten the impression there are other companies in Asia casting lugs, but most private label lugs are LS.
They make very nice lugs
They make very nice lugs
#8
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,073
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4201 Post(s)
Liked 3,857 Times
in
2,305 Posts
Just about any current builder that I know of bends frame bits cold. There are an exception or two out there. Andy
__________________
AndrewRStewart
AndrewRStewart
#9
Senior Member
Thread Starter
I thought about heating it up, but not sure that would have prevented the lug distortion since I was looking for 3 degrees or more. Got the new lug and moved it only 1 degree and will adjust to the limitation. Seriously bummed out with having to outsource lugs to another country. No more 100% US made frames. Will adapt as all good men do.