Organizing Tools
#1
Senior Member
Thread Starter
Join Date: Apr 2014
Location: Connecticut
Posts: 523
Bikes: Trek Domane, Surly Disc Trucker
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 170 Post(s)
Liked 103 Times
in
68 Posts
Organizing Tools
Got a soft-ball question :-). I'm in the process of gradually doing more of my own bike maintenance and purchasing my own tools. Still pretty basic, but it's a start. The thing is, I'm quite unorganized ... curious how you home mechanics organize your tools in a way that makes them accessible and find-able. Thanks!
#2
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,084
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4205 Post(s)
Liked 3,863 Times
in
2,311 Posts
If you don't have the space to dedicate to bike work then storing tools in a tool box or wrap is a easy solution. But if you do have the space I have used peg board for decades and only work out of a tool box when off site.
One way to look at what tool should be stored where (within the overall location) is what tools are used more often. These should be the easiest to reach. Then there's the aspect of a tool's size and how that meshes with the other tools and storage manor. Example of wheel tools is a dishing tool. Rather large but only used when building wheels (or doing serious truing), so it can be pretty well out of easy reach. But the spoke wrench or tire levers will want to be at hand.
This is just like clothing storage. Socks and underwear tend to be reached for more often then jackets or sweaters are. Andy
One way to look at what tool should be stored where (within the overall location) is what tools are used more often. These should be the easiest to reach. Then there's the aspect of a tool's size and how that meshes with the other tools and storage manor. Example of wheel tools is a dishing tool. Rather large but only used when building wheels (or doing serious truing), so it can be pretty well out of easy reach. But the spoke wrench or tire levers will want to be at hand.
This is just like clothing storage. Socks and underwear tend to be reached for more often then jackets or sweaters are. Andy
__________________
AndrewRStewart
AndrewRStewart
#3
Mother Nature's Son
Join Date: Mar 2016
Location: Sussex County, Delaware
Posts: 3,118
Bikes: 2014 Orbea Avant MD30, 2004 Airborne Zeppelin TI, 2003 Lemond Poprad, 2001 Lemond Tourmalet, 2014? Soma Smoothie
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 853 Post(s)
Liked 1,436 Times
in
818 Posts
I am also pretty new to working on my bikes. I also struggle with the organization of tools, accessories and parts. I have dedicated one of my spare rooms to be my bike area. Getting it set up is an ongoing process. Using an apron with pockets has helped me to keep my tools accessible while I am actually working.
#4
Senior Member
Join Date: Dec 2010
Location: northern Deep South
Posts: 8,904
Bikes: Fuji Touring, Novara Randonee
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 2604 Post(s)
Liked 1,933 Times
in
1,213 Posts
Most of my bike specific tools are in an old Brookstone leather wrap -- except for the three way hex wrenches sitting amongst the chain lube bottles on the top of my workbench. General tools live in the Craftsman tool box, and are harder to find.
#5
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 12,905
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Mentioned: 129 Post(s)
Tagged: 0 Thread(s)
Quoted: 4806 Post(s)
Liked 3,928 Times
in
2,553 Posts
Careful! If your tools get organized, you may find them costing more, demanding better work hours (no more of the all-nighters to get that new - to you - bike ready for tomorrow's ride) and who knows what else.
Seriously, the best thing I've ever done is pick up an on-sale mechanic's drawers on wheels at Sears. Put a plywood top on it, then built a back and half height sides to hang tools from. Painted it with gloss white oil based sealer-primer. Screwed dowel 1/2 rounds to the front sides so I can lean bikes up at will without damaging paint. Wow!
Ben
Seriously, the best thing I've ever done is pick up an on-sale mechanic's drawers on wheels at Sears. Put a plywood top on it, then built a back and half height sides to hang tools from. Painted it with gloss white oil based sealer-primer. Screwed dowel 1/2 rounds to the front sides so I can lean bikes up at will without damaging paint. Wow!
Ben
#6
Banned
Professional toolboxes have a lot of shallow (ball bearing) drawers, and so the wrench sizes can all be in a row...
when the bike shop had the tools, each had a nail and an outline, to put it back.. .. same was done at the co op. ..
...
when the bike shop had the tools, each had a nail and an outline, to put it back.. .. same was done at the co op. ..
...
Last edited by fietsbob; 02-28-19 at 04:56 PM.
#8
Senior Member
I ditched the peg board and now use a piece of finish grade plywood, stained the right color and finish nails to hang tools from. Allows me to space them to my liking. Kinda petty, but it makes a difference to my eyes.
#9
Senior Member
Join Date: Sep 2014
Posts: 3,893
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1062 Post(s)
Liked 665 Times
in
421 Posts
Got a soft-ball question :-). I'm in the process of gradually doing more of my own bike maintenance and purchasing my own tools. Still pretty basic, but it's a start. The thing is, I'm quite unorganized ... curious how you home mechanics organize your tools in a way that makes them accessible and find-able. Thanks!
For example, I have a nice old Kennedy mechanic's chest with drawers, and it's a mess, and most of the wrenches are somewhere else in my house right now.
The two best things I've done have been: 1) Focus on making it easy and quick to put things away. I have a small pegboard with a few things on it, but then I just have a number of larger containers for different categories of tools. When I get motivated to clean up, I can just toss tools in containers, and I'm done.
2) "Visual workspace" means that you can see where everything is, at a glance, and see if something is out of place. So all of my containers are open-topped, and I can just look in to find a tool.
#10
SE Wis
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 10,515
Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400, 2013 Novara Randonee, 1990 Trek 970
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 2747 Post(s)
Liked 3,395 Times
in
2,056 Posts
I have 2 tool boxes for bike tools. One is the small or commonly used stuff - allens, screwdrivers, cable cutters, small wrenches, chain tool, cone wrenches, lockring/freewheel tools, spoke wrench, etc. The other is larger or occasional use. Bottom bracket tools, headset wrenches & cup tools, chain whip, stuff like that. My automotive/general use stuff is in a couple big roll aways in the garage that I grab what I need as needed working on bikes. Those are well organized by drawer, metric/sae, 1/2 drive, 3/8 drive, flat/phillips, pliers etc. One drawer in each is a "junk" drawer with misc hardware, unobtainium bits, odd ball stuff,
Last edited by dedhed; 02-28-19 at 06:57 PM.
#11
Senior Member
Thread Starter
Join Date: Apr 2014
Location: Connecticut
Posts: 523
Bikes: Trek Domane, Surly Disc Trucker
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 170 Post(s)
Liked 103 Times
in
68 Posts
Thanks for the tips. I currently work at home in my basement ... which is pretty cluttered (my older son moved from his apartment to work for an out of state non-profit where he moved into a fully furnished group home so didn't need to bring much with him). So, in addition to being my work space ... and my bike maintenance space ... it's a storage area for my son's and my/my wife's stuff. Then, I've got posters on all the walls from my three son's wrestling tournaments (when kids win wrestling tournaments, they get the poster with the brackets showing their path to winning) so I probably don't want to put up peg boards over those although that was an idea I considered.
My work desk is a plain white table, around 3 by 6 feet. I'm kind of thinking when I retire (hopefully in about a year), another option is to just lay the tools out on that table so they're all visible and easily accessible.
But thanks again for the ideas ... sounds like some of you have come up with your own custom solutions!
My work desk is a plain white table, around 3 by 6 feet. I'm kind of thinking when I retire (hopefully in about a year), another option is to just lay the tools out on that table so they're all visible and easily accessible.
But thanks again for the ideas ... sounds like some of you have come up with your own custom solutions!
#12
Senior Member
Join Date: Sep 2014
Posts: 3,893
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1062 Post(s)
Liked 665 Times
in
421 Posts
I like the idea of just laying out the tools on a table or shelf. Now my "pegboard" is just a piece of plywood on the wall, but I have a couple of these:
https://www.amazon.com/Flambeau-TR24.../dp/B001737P9S
https://www.amazon.com/Lehigh-3N1TH-.../dp/B000MKOWP2
Mine are of a different brand, now discontinued (Akro-Mils 08024), but the above links are representative. These things hold a bezillion little tools and are actually quite rugged.
https://www.amazon.com/Flambeau-TR24.../dp/B001737P9S
https://www.amazon.com/Lehigh-3N1TH-.../dp/B000MKOWP2
Mine are of a different brand, now discontinued (Akro-Mils 08024), but the above links are representative. These things hold a bezillion little tools and are actually quite rugged.
Last edited by Gresp15C; 02-28-19 at 11:36 PM.
#14
Senior Member
Join Date: Sep 2017
Location: Eastern Shore, MD
Posts: 2,107
Bikes: Road ready: 1993 Koga Miyata City Liner Touring Hybrid, 1989 Centurion Sport DLX, "I Blame GP" Bridgestone CB-1. Projects: Yea, I got a problem....
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 753 Post(s)
Liked 737 Times
in
422 Posts
I've got my own bad habits. Right now my availible work space is dominated by a 4x8' work surface/plywood storage stack. I'm stuck with this till i can block out the time to build up the touring bike frame and parts pile that takes up half the surface. Point is i have a large flexible flat surface. All my bike tools have a propper home in a tool chest but migrate out to the work surface and collect in knife and fork kitchen drawer organizer trays, cake pans and cardboard boxes. These containers evolve into semi specific task collections. Absolute chaos is controlled by regularly going through the bench pile an returning tools that i wont need for the next couple projects. I need to reorganize the the space and move the plywood else where. Then I'm going to try a rolling cabinet with a small peg board as a tool collector adjacent to a smaller bench and work stand.
#17
Senior Member
Join Date: Aug 2007
Posts: 2,595
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 608 Post(s)
Liked 352 Times
in
225 Posts
I live in a condo and don't have the luxury of a dedicated workspace so this is my solution. Park Tool BX-2. It keeps everything organized and in one place. Yes, this tool box is expensive but it is well thought out. Packs away nicely when I don't need it. When space is limited this could be a solution.
[url=https://flic.kr/p/DjUQBu]
[url=https://flic.kr/p/DjUQBu]
#19
Full Member
That is a dyi tool roll which can be augmented with an inner tube
#21
Full Member
That is a homemade toolbox that stands open on a bench orcloses for easy transport.
#23
Full Member
Another view. Needs to be reorganized a bit since there are way too many wrenches.
#25
Senior Member
Join Date: Aug 2016
Location: NW Pa.
Posts: 241
Bikes: 2018 Specialized Sirrus, 2016 Surly Disc Trucker, 800 MTB for winter use
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 101 Post(s)
Liked 0 Times
in
0 Posts
piece of 3/4" plywood and some finishing nails to hang tools on.
[img][/img]
piece of 3/4" plywood w/ finishing nails to hang tools on.
[img][/img]
piece of 3/4" plywood w/ finishing nails to hang tools on.