Do carbon belts stretch?
#1
Member
Thread Starter
Join Date: Jul 2017
Posts: 41
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 20 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Do carbon belts stretch?
Hi,
I'm thinking about buying a belt driven bike. But all bikes I've seen, have vertical dropouts. Like that:
With chains, it doesn't matter how cautious you are, they always stretch and either the derailleur keeps the chain tensioned or you have a horizontal dropout to keep it in the proper tension.
I don't know much about carbon belts, so I'm worried if with time it will stretch and loose tension.
Anyone knows about that?
Also, recommendation on belt driven bikes until €1000 are welcome. But since this is going to be a daily use bike, eyelets for mudgards and racks are important. Also disk brakes are welcome.
I'm thinking about buying a belt driven bike. But all bikes I've seen, have vertical dropouts. Like that:
With chains, it doesn't matter how cautious you are, they always stretch and either the derailleur keeps the chain tensioned or you have a horizontal dropout to keep it in the proper tension.
I don't know much about carbon belts, so I'm worried if with time it will stretch and loose tension.
Anyone knows about that?
Also, recommendation on belt driven bikes until €1000 are welcome. But since this is going to be a daily use bike, eyelets for mudgards and racks are important. Also disk brakes are welcome.
Last edited by valeriano; 08-16-17 at 06:51 AM.
#2
Banned
in a metal chain, "Stretch" is a way of describing accumulated wear of its metal surfaces as a total increase in length.
bikes, in the eurozone? (I am in the US) German Tout Terrain is more than €1000, Especially with VAT included in that total.
Gates carbon drive-train components come to $500 alone, so i doubt you will find anything at your price,
unless its an Asian copy of the belt drive idea.
...
bikes, in the eurozone? (I am in the US) German Tout Terrain is more than €1000, Especially with VAT included in that total.
Gates carbon drive-train components come to $500 alone, so i doubt you will find anything at your price,
unless its an Asian copy of the belt drive idea.
...
Last edited by fietsbob; 08-16-17 at 08:58 AM.
#3
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,081
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4204 Post(s)
Liked 3,861 Times
in
2,309 Posts
Drive belts are very sensitive to tension in that too little is a bad thing. But as a well designed belted bike has an ability to adjust the belt's tension so if any "stretch" does happen it's easily corrected for. Have you ridden a belted bike yet? They do feel a bit different IMO. Andy
#4
Banned
Join Date: Apr 2010
Location: Lincoln Ne
Posts: 9,924
Bikes: RANS Stratus TerraTrike Tour II
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 3352 Post(s)
Liked 1,056 Times
in
635 Posts
Something that might contribute to premature stretch is the fact that too many people run cog belts way too tight. I worked with them on office machines for 47 years, and many made them way too tight.
#5
Member
Thread Starter
Join Date: Jul 2017
Posts: 41
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 20 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
in a metal chain, "Stretch" is a way of describing accumulated wear of its metal surfaces as a total increase in length.
bikes, in the eurozone? (I am in the US) German Tout Terrain is more than €1000, Especially with VAT included in that total.
Gates carbon drive-train components come to $500 alone, so i doubt you will find anything at your price,
unless its an Asian copy of the belt drive idea.
...
bikes, in the eurozone? (I am in the US) German Tout Terrain is more than €1000, Especially with VAT included in that total.
Gates carbon drive-train components come to $500 alone, so i doubt you will find anything at your price,
unless its an Asian copy of the belt drive idea.
...
https://www.boc24.de/shop/fahrraeder...cycles-cx-1000
Last edited by valeriano; 08-16-17 at 09:24 AM.
#6
Member
Thread Starter
Join Date: Jul 2017
Posts: 41
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 20 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Drive belts are very sensitive to tension in that too little is a bad thing. But as a well designed belted bike has an ability to adjust the belt's tension so if any "stretch" does happen it's easily corrected for. Have you ridden a belted bike yet? They do feel a bit different IMO. Andy
What difference did you notice?
#7
Senior Member
Join Date: Apr 2012
Location: Nor Cal
Posts: 6,016
Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 1814 Post(s)
Likes: 0
Liked 923 Times
in
569 Posts
There's probably an eccentric bottom bracket to adjust belt tension.
IME, belts don't stretch- auto fan belts often run for their service life without being tightened.
IME, belts don't stretch- auto fan belts often run for their service life without being tightened.
#8
Senior Member
Join Date: Jun 2013
Location: Bozeman
Posts: 4,094
Bikes: 199? Landshark Roadshark, 198? Mondonico Diamond, 1987 Panasonic DX-5000, 1987 Bianchi Limited, Univega... Chrome..., 1989 Schwinn Woodlands, Motobecane USA Record, Raleigh Tokul 2
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 1131 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
The one I'm thinking about right now is this one:
https://www.boc24.de/shop/fahrraeder...cycles-cx-1000
https://www.boc24.de/shop/fahrraeder...cycles-cx-1000
Also, horizontal dropouts with disc brakes are... difficult to say the least. The caliper needs to move with the wheel. Therefore it's easier to put a eccentric bb into the bike instead unless you want to take surly's approach and have a way overengineered dropout.
#9
Senior Member
Join Date: Sep 2015
Location: Front Range, Colorado
Posts: 128
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 72 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Hi,
I'm thinking about buying a belt driven bike. But all bikes I've seen, have vertical dropouts. Like that:
With chains, it doesn't matter how cautious you are, they always stretch and either the derailleur keeps the chain tensioned or you have a horizontal dropout to keep it in the proper tension.
I don't know much about carbon belts, so I'm worried if with time it will stretch and loose tension.
Anyone knows about that?
Also, recommendation on belt driven bikes until €1000 are welcome. But since this is going to be a daily use bike, eyelets for mudgards and racks are important. Also disk brakes are welcome.
I'm thinking about buying a belt driven bike. But all bikes I've seen, have vertical dropouts. Like that:
With chains, it doesn't matter how cautious you are, they always stretch and either the derailleur keeps the chain tensioned or you have a horizontal dropout to keep it in the proper tension.
I don't know much about carbon belts, so I'm worried if with time it will stretch and loose tension.
Anyone knows about that?
Also, recommendation on belt driven bikes until €1000 are welcome. But since this is going to be a daily use bike, eyelets for mudgards and racks are important. Also disk brakes are welcome.
Gates belts are polyurethane. A toxic NOT environmentally friendly concoction of man's modern excess. There is a marketing gimmick to refer to Gates belts as carbon, but they are what they are.
The belts don't stretch. They are very reliable.
However, from an efficiency perspective belt drive is significantly less efficient than chain drive. Nothing is as efficient as chain drive.
Do you want nearly maintenance free but less efficient?
#10
Senior Member
I worked as a conveyor mechanic for 30 years (now retired..thank God). I never saw any of our "carbon" drive belts stretch. But, I've seen many of them snap. I wouldn't worry though, you won't be trying to drive a 24" belt from a dead stop with 500+ pounds of product on it. As for the ones that weren't marked "carbon", I've seen many of them shear off their teeth.
Last edited by gearbasher; 08-16-17 at 10:10 AM.
#11
Member
Thread Starter
Join Date: Jul 2017
Posts: 41
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 20 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
We don't live in a dystopia like 1984.
Gates belts are polyurethane. A toxic NOT environmentally friendly concoction of man's modern excess. There is a marketing gimmick to refer to Gates belts as carbon, but they are what they are.
The belts don't stretch. They are very reliable.
However, from an efficiency perspective belt drive is significantly less efficient than chain drive. Nothing is as efficient as chain drive.
Do you want nearly maintenance free but less efficient?
Gates belts are polyurethane. A toxic NOT environmentally friendly concoction of man's modern excess. There is a marketing gimmick to refer to Gates belts as carbon, but they are what they are.
The belts don't stretch. They are very reliable.
However, from an efficiency perspective belt drive is significantly less efficient than chain drive. Nothing is as efficient as chain drive.
Do you want nearly maintenance free but less efficient?
But low maintenance is very important to me. Bike shops are VERY expensive here and I want to go there as little as possible until I finish buying all the tools needed to be self sufficient.
#12
- Soli Deo Gloria -
Join Date: Aug 2015
Location: Northwest Georgia
Posts: 14,779
Bikes: 2018 Rodriguez Custom Fixed Gear, 2017 Niner RLT 9 RDO, 2015 Bianchi Pista, 2002 Fuji Robaix
Mentioned: 235 Post(s)
Tagged: 0 Thread(s)
Quoted: 6844 Post(s)
Liked 736 Times
in
469 Posts
Gates says that their belts use "Advanced no-stretch carbon cord technology."
Not sure how much of that phrase is engineering and how much is marketing.
Gates Carbon Drive? System for Bicycles | Gates Carbon Drive?
Not sure how much of that phrase is engineering and how much is marketing.
Gates Carbon Drive? System for Bicycles | Gates Carbon Drive?
#13
Senior Member
Join Date: Jun 2013
Location: Bozeman
Posts: 4,094
Bikes: 199? Landshark Roadshark, 198? Mondonico Diamond, 1987 Panasonic DX-5000, 1987 Bianchi Limited, Univega... Chrome..., 1989 Schwinn Woodlands, Motobecane USA Record, Raleigh Tokul 2
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 1131 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Efficiency is not my main concern. This is going to be a daily use bike, so I'm not worried about speed.
But low maintenance is very important to me. Bike shops are VERY expensive here and I want to go there as little as possible until I finish buying all the tools needed to be self sufficient.
But low maintenance is very important to me. Bike shops are VERY expensive here and I want to go there as little as possible until I finish buying all the tools needed to be self sufficient.
Everything else isn't really necessary until you have to do serious maintence to the bike (bearings etc.)
#14
Senior Member
Join Date: Jun 2013
Location: Bozeman
Posts: 4,094
Bikes: 199? Landshark Roadshark, 198? Mondonico Diamond, 1987 Panasonic DX-5000, 1987 Bianchi Limited, Univega... Chrome..., 1989 Schwinn Woodlands, Motobecane USA Record, Raleigh Tokul 2
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 1131 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Gates says that their belts use "Advanced no-stretch carbon cord technology."
Not sure how much of that phrase is engineering and how much is marketing.
Gates Carbon Drive? System for Bicycles | Gates Carbon Drive?
Not sure how much of that phrase is engineering and how much is marketing.
Gates Carbon Drive? System for Bicycles | Gates Carbon Drive?
Note: the CDN system is not approved for use on mountain bikes, mid-drive eBikes or gear boxes, fixed gear bikes, or high mileage trekking/touring bikes.
With that said, the strongest mountain biker I know rode a single speed belt drive off road up significant hills, so it seems to work fine even in those situations.
#15
Banned
recommendation on belt driven bikes until €1000 are welcome
or be able to repair a cheaper chain drive bike. while you look for a job that pays much better.
then get the higher end bike of your dreams..
....
Last edited by fietsbob; 08-16-17 at 10:49 AM.
#16
Senior Member
Join Date: Jan 2013
Location: Llano Estacado
Posts: 3,702
Bikes: old clunker
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 684 Post(s)
Likes: 0
Liked 105 Times
in
83 Posts
Gates says that their belts use "Advanced no-stretch carbon cord technology."
Not sure how much of that phrase is engineering and how much is marketing.
Gates Carbon Drive? System for Bicycles | Gates Carbon Drive?
Not sure how much of that phrase is engineering and how much is marketing.
Gates Carbon Drive? System for Bicycles | Gates Carbon Drive?
"Recent low-stretch carbon cord technology."
So not radically different in this case.
#17
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,096 Times
in
742 Posts
I wonder if the fixed gear prohibition is because the belt won't tolerate the torque reversal during braking. As to the other disclaimers, it seems the belt has a lower torque limitations then a chain and, as you noted, long term durability issues.
#18
Senior Member
Join Date: Jun 2013
Location: Bozeman
Posts: 4,094
Bikes: 199? Landshark Roadshark, 198? Mondonico Diamond, 1987 Panasonic DX-5000, 1987 Bianchi Limited, Univega... Chrome..., 1989 Schwinn Woodlands, Motobecane USA Record, Raleigh Tokul 2
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 1131 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
That was my thought as well. It seems those belts have a directionality associated with them as one of the warnings is "don't reverse" but in more ambiguous terms. I wonder if the tooth shape isn't symmetrical.
#19
Banned
IDK where you get your assumptions, Because, they make a threaded cog for fixies
21T Thread-on/Fixie CDX
21T Thread-on/Fixie CDX
#20
Senior Member
Join Date: Jun 2013
Location: Bozeman
Posts: 4,094
Bikes: 199? Landshark Roadshark, 198? Mondonico Diamond, 1987 Panasonic DX-5000, 1987 Bianchi Limited, Univega... Chrome..., 1989 Schwinn Woodlands, Motobecane USA Record, Raleigh Tokul 2
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 1131 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
IDK where you get your assumptions, Because, they make a threaded cog for fixies
21T Thread-on/Fixie CDX
21T Thread-on/Fixie CDX
Note: the CDN system is not approved for use on mountain bikes, mid-drive eBikes or gear boxes, fixed gear bikes, or high mileage trekking/touring bikes.
Handling & Tension
EDIT: I got it. They have two different lines of products. A "rugged" product designed for fixies and off-road, and a normal product not "designed" for it.
Sounds like marketing hogwash to me.
Last edited by corrado33; 08-16-17 at 12:01 PM.
#21
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,503
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7348 Post(s)
Liked 2,466 Times
in
1,434 Posts
Is reverse torque higher than forward torque? If so, how?
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#22
Senior Member
Join Date: Feb 2009
Posts: 2,522
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 1422 Post(s)
Likes: 0
Liked 7 Times
in
5 Posts
They are belted with carbon fiber cords. Obviously they must use a flexible poly as a belt material rather than rigid epoxy, but it is still a carbon fiber composite material just like the less flexible stuff they make airplanes and bicycle frames out of.
#23
Senior Member
Join Date: May 2014
Posts: 2,537
Bikes: yes
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 1281 Post(s)
Liked 643 Times
in
329 Posts
Took this guy 19,000 miles to break his first belt: Review: Gates Carbon Belt Drive Centertrack - CyclingAbout
Can't remember the brand but I've seen an LBS selling belt-drive single speed and 3-speed commuters for ~$600. So they're out there.
Can't remember the brand but I've seen an LBS selling belt-drive single speed and 3-speed commuters for ~$600. So they're out there.
#24
Senior Member
CDN belt is for urban/city riding which "offers a lower-cost option for the casual rider."
CDX belt is for "high-mileage touring, competitive racing, or rugged off-roading" and "performs in the harshest conditions."
Bicycle Belt Drive Products Overview | Gates Carbon Drive?
FAQs
My Priority Continuum uses the CDN belt. I've stood on the pedals and pushed hard to get up a few hills, and haven't had any problems. Granted, I've only had it a few months and am just now coming up on 500 miles, but so far no problems or concerns with the belt.
CDX belt is for "high-mileage touring, competitive racing, or rugged off-roading" and "performs in the harshest conditions."
Bicycle Belt Drive Products Overview | Gates Carbon Drive?
FAQs
My Priority Continuum uses the CDN belt. I've stood on the pedals and pushed hard to get up a few hills, and haven't had any problems. Granted, I've only had it a few months and am just now coming up on 500 miles, but so far no problems or concerns with the belt.
#25
Member
Join Date: Apr 2015
Posts: 46
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 20 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
IKEA sell a belt drive bike and it is £400 in the UK. I doubt they sell many in the UK market because it is an unconventional design to British eyes (coaster brakes for example). Perhaps an easier sell in Continental Europe.
I think there is merit in the belt drive from an engineering perspective (it's not just marketing), but the fact that market share for belt drive is tiny (I think I have only ever seen one belt-drive bike being ridden) suggests that chain drive is doing a pretty good job.
I think there is merit in the belt drive from an engineering perspective (it's not just marketing), but the fact that market share for belt drive is tiny (I think I have only ever seen one belt-drive bike being ridden) suggests that chain drive is doing a pretty good job.