FS: 63cm Brian Baylis Frame/Fork/Record HS
12-17-19, 10:18 AM
#1
Newbie
Thread Starter
Join Date: Sep 2019
Location: Florida
Posts: 2
Bikes: In the past... Peugeot PX-10 '73, Raleigh International '74, Schwinn Paramount '75, Gios '77, several U.S. builder custom frames and then Baylis '85 and a Motobecane Immortal '16 c. Ultegra ;(
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 2 Times
in
1 Post
FS: 63cm Brian Baylis Frame/Fork/Record HS
FS: From a very picky owner. 63cm Brian Baylis Frame/Fork/Record HS w. Campy binder bolt
For reasons of age and health I reluctantly part with my Baylis Road Frame - SN 0015 (first frame of '85). Pristine. Classic features, beautiful chrome (not often seen on a Baylis). Few miles on it, then repainted 2015 - by Brian.
All measures C to C
Seat Tube: 61.5 cm (C to C) ~63 C to T
TT: 59.5 cm (like the old LeMond geometry)
Drop: 7.3 cm
Chainstays: 41.0 cm
Fork Rake: 4.0 cm
Seat Angle: 72.8 degrees
Head Angle: 74 degrees
Brake Clearance: 49 mm
Rear Triangle set for 126.5 mm axle
Head Tube: Generous for Campy Record, but sufficient if you wish to mount a conventional Chris King HS
Tubing: Columbus
Other:
Cinelli MC semi-sloping fork crown
Cinelli SCM Bottom Bracket
All Italian Threading
Internal Brake Cable and External/Internal Shifter Cable
Any questions? I will try to answer. Oh... $3500.00 firm. Freight extra. Ships from Florida.
Serious inquiries only - please. Also - can call/SMS nine four one seven three five oh two four five
___________________________________________________________________________
Drive Side
Crank Side
Internal routing of brake cable
Nice! ...also chainstay through routing of Rear Derailleur cable...
For reasons of age and health I reluctantly part with my Baylis Road Frame - SN 0015 (first frame of '85). Pristine. Classic features, beautiful chrome (not often seen on a Baylis). Few miles on it, then repainted 2015 - by Brian.
All measures C to C
Seat Tube: 61.5 cm (C to C) ~63 C to T
TT: 59.5 cm (like the old LeMond geometry)
Drop: 7.3 cm
Chainstays: 41.0 cm
Fork Rake: 4.0 cm
Seat Angle: 72.8 degrees
Head Angle: 74 degrees
Brake Clearance: 49 mm
Rear Triangle set for 126.5 mm axle
Head Tube: Generous for Campy Record, but sufficient if you wish to mount a conventional Chris King HS
Tubing: Columbus
Other:
Cinelli MC semi-sloping fork crown
Cinelli SCM Bottom Bracket
All Italian Threading
Internal Brake Cable and External/Internal Shifter Cable
Any questions? I will try to answer. Oh... $3500.00 firm. Freight extra. Ships from Florida.
Serious inquiries only - please. Also - can call/SMS nine four one seven three five oh two four five
___________________________________________________________________________
Drive Side
Crank Side
Internal routing of brake cable
Nice! ...also chainstay through routing of Rear Derailleur cable...
Last edited by Sam052; 09-12-20 at 06:36 PM. Reason: Sold. Thank you!
05-08-20, 07:09 AM
#2
Junior Member
His lugwork is pure art
FS: From a very picky owner. 63cm Brian Baylis Frame/Fork/Record HS w. Campy binder bolt
For reasons of age and health I reluctantly part with my Baylis Road Frame - SN 0015 (first frame of '85). Pristine. Classic features, beautiful chrome (not often seen on a Baylis). Few miles on it, then repainted 2015 - by Brian.
All measures C to C
Seat Tube: 61.5 cm (C to C) ~63 C to T
TT: 59.5 cm (like the old LeMond geometry)
Drop: 7.3 cm
Chainstays: 41.0 cm
Fork Rake: 4.0 cm
Seat Angle: 72.8 degrees
Head Angle: 74 degrees
Brake Clearance: 49 mm
Rear Triangle set for 126.5 mm axle
Head Tube: Generous for Campy Record, but sufficient if you wish to mount a conventional Chris King HS
Tubing: Columbus
Other:
Cinelli MC semi-sloping fork crown
Cinelli SCM Bottom Bracket
All Italian Threading
Internal Brake Cable and External/Internal Shifter Cable
Any questions? I will try to answer. Oh... $3500.00 firm. Freight extra. Ships from Florida.
Serious inquiries only - please. Also - can call/SMS nine four one seven three five oh two four five
___________________________________________________________________________
Drive Side
Crank Side
Internal routing of brake cable
Nice! ...also chainstay through routing of Rear Derailleur cable...
For reasons of age and health I reluctantly part with my Baylis Road Frame - SN 0015 (first frame of '85). Pristine. Classic features, beautiful chrome (not often seen on a Baylis). Few miles on it, then repainted 2015 - by Brian.
All measures C to C
Seat Tube: 61.5 cm (C to C) ~63 C to T
TT: 59.5 cm (like the old LeMond geometry)
Drop: 7.3 cm
Chainstays: 41.0 cm
Fork Rake: 4.0 cm
Seat Angle: 72.8 degrees
Head Angle: 74 degrees
Brake Clearance: 49 mm
Rear Triangle set for 126.5 mm axle
Head Tube: Generous for Campy Record, but sufficient if you wish to mount a conventional Chris King HS
Tubing: Columbus
Other:
Cinelli MC semi-sloping fork crown
Cinelli SCM Bottom Bracket
All Italian Threading
Internal Brake Cable and External/Internal Shifter Cable
Any questions? I will try to answer. Oh... $3500.00 firm. Freight extra. Ships from Florida.
Serious inquiries only - please. Also - can call/SMS nine four one seven three five oh two four five
___________________________________________________________________________
Drive Side
Crank Side
Internal routing of brake cable
Nice! ...also chainstay through routing of Rear Derailleur cable...
Likes For Stellari:
06-09-20, 09:14 PM
#4
Junior Member
That's such a fantastic piece of work. This will make someone very happy.
09-12-20, 06:37 PM
#5
Newbie
Thread Starter
Join Date: Sep 2019
Location: Florida
Posts: 2
Bikes: In the past... Peugeot PX-10 '73, Raleigh International '74, Schwinn Paramount '75, Gios '77, several U.S. builder custom frames and then Baylis '85 and a Motobecane Immortal '16 c. Ultegra ;(
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 2 Times
in
1 Post
Sold it. Thank you for your comments!
