Bike-E Fork Swap
#1
Senior Member
Thread Starter
Join Date: Oct 2005
Location: Ormond Beach, FL
Posts: 235
Bikes: 2005 Specialized Roubaix Elite
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Bike-E Fork Swap
I'm helping a friend convert his Bike-E recumbent from 16" front and 20" (406mm) rear wheels to 20' (451mm) wheels at both ends. The rear swap was pretty straightforward but the front is presenting more of a problem.
Specifically, the 451 fork that we have has a 1" threaded steerer, but the Bike-E fork, whose legs are 'way too short, has a 1 1/4" threadless steerer that's 9" long. So we need either a 451 fork with the 1 1/4" x 9" threadless steerer or a way to adapt the 1" threaded steerer to the Bike-E head tube.
Can anyone suggest a source for the fork we need, or a way to adapt the fork we have on hand?
Regards,
Bob P.
Specifically, the 451 fork that we have has a 1" threaded steerer, but the Bike-E fork, whose legs are 'way too short, has a 1 1/4" threadless steerer that's 9" long. So we need either a 451 fork with the 1 1/4" x 9" threadless steerer or a way to adapt the 1" threaded steerer to the Bike-E head tube.
Can anyone suggest a source for the fork we need, or a way to adapt the fork we have on hand?
Regards,
Bob P.