Go Back  Bike Forums > Bike Forums > Advocacy & Safety
Reload this Page >

Safest Helmut

Notices
Advocacy & Safety Cyclists should expect and demand safe accommodation on every public road, just as do all other users. Discuss your bicycle advocacy and safety concerns here.

Safest Helmut

Old 12-25-13, 10:32 PM
  #1  
jhglaw
Lawman
Thread Starter
 
Join Date: Jan 2005
Location: San Diego, CA
Posts: 205

Bikes: Spec. Tarmac Expert SL4

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Safest Helmut

I don't care how many vents my helmet has or whether it is a little heavier. I want a helmet that protects my brain. If a harder outer shell and more crush material will give me more protection, I want it. Does anyone know if there is a manufacturer that builds a sturdier bike helmet? Jim
jhglaw is offline  
Old 12-25-13, 11:28 PM
  #2  
rydabent
Banned
 
Join Date: Apr 2010
Location: Lincoln Ne
Posts: 9,924

Bikes: RANS Stratus TerraTrike Tour II

Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 3352 Post(s)
Liked 1,054 Times in 634 Posts
I have mentioned before that many years ago I owned a Bell Tourlite helmet. It had Lexan shell that was quite thick. Without a doubt it was the safest helmet I ever owned, and wish Bell still made it.
rydabent is offline  
Old 12-26-13, 12:08 AM
  #3  
Chris516
24-Speed Machine
 
Chris516's Avatar
 
Join Date: Jul 2004
Location: Wash. Grove, MD
Posts: 6,058

Bikes: 2003 Specialized Allez 24-Speed Road Bike

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time in 1 Post
Originally Posted by jhglaw
I don't care how many vents my helmet has or whether it is a little heavier. I want a helmet that protects my brain. If a harder outer shell and more crush material will give me more protection, I want it. Does anyone know if there is a manufacturer that builds a sturdier bike helmet? Jim
A helmet is only as good as, the quality of the helmet itself, and the cyclist using the helmet. Yes, I do support the use of a bike helmet but, if you wear a bike helmet like you might wear a baseball cap. Then forget it doing you any good in a crash. A helmet won't protect you if, the inertia in the forward momentum, is greater than the quality of the helmet.

But here is a website I use, before I get a helmet:https://www.helmets.org/index.htm

Last edited by Chris516; 12-26-13 at 09:59 AM. Reason: Included link to helmet ratings I use before I buy a helmet
Chris516 is offline  
Old 12-26-13, 12:10 AM
  #4  
gsa103
Senior Member
 
Join Date: May 2013
Location: SF Bay Area
Posts: 4,401

Bikes: Bianchi Infinito (Celeste, of course)

Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 754 Post(s)
Liked 104 Times in 77 Posts
Sadly, I don't think there's any real information on this. Helmet manufacturers don't cater to the safety market.
gsa103 is offline  
Old 12-26-13, 05:11 AM
  #5  
LordMarv
Senior Member
 
LordMarv's Avatar
 
Join Date: Nov 2013
Posts: 121

Bikes: Fuji Espree, Sun EZ-1 Recumbent Bike

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
If a non-vented helmet wouldn't bother you, you might think about a motorcycle helmet, most are stouter than bicycle helmets and have a D.O.T (Dept. of Transportation) rating. Go to a motorcycle shop, look around, try on a few. Some of the classic designs with no face shield are pretty cool looking. Just a thought.
LordMarv is offline  
Old 12-26-13, 07:36 AM
  #6  
mr_bill
Senior Member
 
Join Date: Sep 2013
Location: Massachusetts
Posts: 4,529
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 2111 Post(s)
Liked 663 Times in 443 Posts
Oh please do *NOT* take the advice to use a motorsports helmet on a bicycle. (Or visa-versa.) They are designed for different purposes.
(And just an aside - the D.O.T. is a minimum performance requirement for motorsports helmets. There are other ratings systems that you should be looking for in a motorsports helmet.)

If you really want a hard shell helmet, there are plenty of bicycle helmets to choose from. Pick any of the multisport hard shell helmets that also have a CPSC Bicycle stamp.
You can start browsing at
https://www.bellhelmets.com/cycling/helmets/ .


One last note. Lots of folks (including me) have fond memories of the Bell Tourlite bicycle helmet, and for good reasons. It was quite good for its day. But please do not be tempted to buy a used one on ebay, unless you'd like a collectible to put on a shelf. The foam and shells of those vintage helmets have all aged out of service.

(And since this is A&S if you are a gray beard who is still using your Bell Tourlite - good for you. Mine is retired, what you do with yours is up to you.)

-mr. bill

Last edited by mr_bill; 12-26-13 at 07:46 AM.
mr_bill is offline  
Old 12-26-13, 07:52 AM
  #7  
commodorefork
Member
 
Join Date: Apr 2012
Location: Saint Louis, MO
Posts: 42
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
A motorcycle helmet is probably a little much for bike riding. But you could go halfway and get a skater's helmet. They're built stronger, but the tradeoff you'd make is having to put up with less ventilation.

Here's the model that I use: https://www.amazon.com/Protec-Adult-H...=skater+helmet

Some reviews for that particular helmet say that it isn't certified to adequately protect you, so you may need to look around.

Last edited by commodorefork; 12-26-13 at 08:02 AM.
commodorefork is offline  
Old 12-26-13, 08:15 AM
  #8  
mconlonx
Senior Member
 
mconlonx's Avatar
 
Join Date: Jun 2007
Posts: 7,558
Mentioned: 47 Post(s)
Tagged: 0 Thread(s)
Quoted: 7148 Post(s)
Liked 134 Times in 92 Posts
If I were looking for the safest helmet, I'd be looking at the POC Receptor Backcountry MIPS.

Dual density foam, addressing low and high force impacts, multiple impact use; hard shell construction with advanced penetration protection; MIPS to mitigate oblique/rotational forces.

Next best in my opinion would be POC Trabec Race MIPS, which I'd consider if venting and a visor were more of a priority.
mconlonx is offline  
Old 12-26-13, 09:57 AM
  #9  
FBinNY 
Senior Member
 
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,546

Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter

Mentioned: 139 Post(s)
Tagged: 1 Thread(s)
Quoted: 5703 Post(s)
Liked 2,433 Times in 1,346 Posts
The concept of "safest" helmet is undefinable. The efficiency of any helmet depends on the impact speed. Impact speed is assumed when helmets are designed, and the design is optimized for that speed, with performance falling off on either side.

Helmets work by increasing the "baking distance" for your head from the impact sped to zero. The greater the braking distance the lower the G forces inside the head. So the key is a thicker crush zone, and crush rate matched for the impact speed. If
designed perfectly the foam will begin to crush at impact and bring your head's speed to zero just as it's crushed to the max.

If the crush rate is too high for the speed and thickness, your head will slow to zero before using the full thickness. If the rate is too low, you'll crush to the end before lowing to zero.

So it's the crush rate that determines the G-force your brain is subjected to, and helmet designers stay short of the maximum the average head will tolerate. Then they decide on a protection level and calculate the needed thickness.

You'd think that the answer would then be thicker crush zones, and it would be but for practical considerations. More foam means more weight, and a larger shell creates new problems, such as greater torque on impact, which increases neck twisting.
__________________
FB
Chain-L site

An ounce of diagnosis is worth a pound of cure.

Just because I'm tired of arguing, doesn't mean you're right.

“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN

WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FBinNY is offline  
Old 12-26-13, 10:42 AM
  #10  
ItsJustMe
Señior Member
 
ItsJustMe's Avatar
 
Join Date: Sep 2005
Location: Michigan
Posts: 13,749

Bikes: Windsor Fens, Giant Seek 0 (2014, Alfine 8 + discs)

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 446 Post(s)
Likes: 0
Liked 8 Times in 7 Posts
POC Trabec Race MIPS. I bought one after reading up on the research a few months ago. You have to import them, they're around $200, but I can afford it easily, and I can't justify not spending money if it gives me even a slightly improved chance of not having a brain injury.

MIPS is the important bit. If there are new helmets on the market that use MIPS, check those out too. When I bought mine, the Trabec Race was about it.
__________________
Work: the 8 hours that separates bike rides.
ItsJustMe is offline  
Old 12-26-13, 05:18 PM
  #11  
Chris516
24-Speed Machine
 
Chris516's Avatar
 
Join Date: Jul 2004
Location: Wash. Grove, MD
Posts: 6,058

Bikes: 2003 Specialized Allez 24-Speed Road Bike

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time in 1 Post
A motorcycle helmet while overkill on the safety spectrum for a cyclist. It can actually throw a cyclist off balance. Except in the case of a cyclist on a recumbent, or a four-wheel bike.

Last edited by Chris516; 12-26-13 at 05:49 PM.
Chris516 is offline  
Old 12-26-13, 06:23 PM
  #12  
kjmillig
Senior Member
 
kjmillig's Avatar
 
Join Date: Aug 2006
Location: NW Texas
Posts: 1,122
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
MET and POC both make good helmets. The MET Parachute is a full face bike helmet designed for downhill or extreme mountain biking. There are also other brands of full face helmets designed for MTB and BMX. And as mentioned, multi-sport helmets commonly seen on snowboarders and skateboarders.
kjmillig is offline  
Old 12-26-13, 08:06 PM
  #13  
gsa103
Senior Member
 
Join Date: May 2013
Location: SF Bay Area
Posts: 4,401

Bikes: Bianchi Infinito (Celeste, of course)

Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 754 Post(s)
Liked 104 Times in 77 Posts
Originally Posted by FBinNY
The concept of "safest" helmet is undefinable. The efficiency of any helmet depends on the impact speed. Impact speed is assumed when helmets are designed, and the design is optimized for that speed, with performance falling off on either side.
If the crush rate is too high for the speed and thickness, your head will slow to zero before using the full thickness. If the rate is too low, you'll crush to the end before lowing to zero.

So it's the crush rate that determines the G-force your brain is subjected to, and helmet designers stay short of the maximum the average head will tolerate. Then they decide on a protection level and calculate the needed thickness.
That's all very true. Those are all measurable quantities, such as G-forces vs impact speed, etc. The data isn't published anywhere. Its not clear that helmet manufacturers are really optimizing around a range of impacts other than meeting relevant standards.
gsa103 is offline  
Old 12-28-13, 04:23 AM
  #14  
Dahon.Steve
Senior Member
 
Join Date: Dec 2001
Location: New Jersey
Posts: 7,143
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 261 Post(s)
Likes: 0
Liked 11 Times in 10 Posts
Originally Posted by LordMarv
If a non-vented helmet wouldn't bother you, you might think about a motorcycle helmet, most are stouter than bicycle helmets and have a D.O.T (Dept. of Transportation) rating. Go to a motorcycle shop, look around, try on a few. Some of the classic designs with no face shield are pretty cool looking. Just a thought.


+1

The contruction of a motorcycle helmet is night and day compared to a bicycle helmet. In fact, it is illegal to wear a bicycle helmet on a motorcycle. Why? Because a motorcycle helmet is better constructed and safer than a bicycle helmet. Yet, a cyclist travels with the same cars and trucks and hits motorcycle speed at times but is protected with a much inferior helmet.

Go and buy a bicycle helmet and then go check out a real motocycle helmet. See for yourself who has better protection.

Last edited by Dahon.Steve; 01-01-14 at 08:57 AM.
Dahon.Steve is offline  
Old 12-28-13, 08:23 AM
  #15  
ItsJustMe
Señior Member
 
ItsJustMe's Avatar
 
Join Date: Sep 2005
Location: Michigan
Posts: 13,749

Bikes: Windsor Fens, Giant Seek 0 (2014, Alfine 8 + discs)

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 446 Post(s)
Likes: 0
Liked 8 Times in 7 Posts
Motorcycle helmets on a bike are definitely overkill. They add a lot of weight to the head, increasing the chances of rotational injuries to the neck. On a motorcycle it's an additional hazard worth taking because you need the extra protection, but on a bike I'm pretty sure you'd be more likely to be injured wearing a motorcycle helmet than a bike helmet.

Also, motorcycle helmets are almost exclusively designed to minimize the risk of skull fracture, which is a significant threat when falling on a motorcycle. I don't think they do a thing to minimize the risk of rotational brain injuries and concussion, which are the main source of injury on bicycles. They're two different tools because they are two different problem spaces.

Also, on a bicycle, you're working a lot harder. My head is already a sweaty, dripping mess with a bike helmet, I don't think I could even bear wearing a motorcycle helmet on a bike.
__________________
Work: the 8 hours that separates bike rides.
ItsJustMe is offline  
Old 12-28-13, 05:58 PM
  #16  
nelson249
"Per Ardua ad Surly"
 
nelson249's Avatar
 
Join Date: May 2006
Location: Kitchener, Ontario
Posts: 1,416

Bikes: Bianchi Specialissima, Mongoose Hilltopper ATB, Surly Cross-Check, Norco City Glide

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
The safest Helmut is my buddy down the street who always follows the rules of the road and rides defensively. I don't recall how many vents he has, though.
nelson249 is offline  
Old 12-28-13, 08:20 PM
  #17  
SnowJob
Dirt junkie.
 
SnowJob's Avatar
 
Join Date: Nov 2011
Location: Minneapolis
Posts: 406

Bikes: Surly Ice Cream Truck, Peacock Groove road bikem, Salsa Fargo

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 6 Times in 4 Posts
No, sorry, the correct answer is Helmut Kohl. Helmut Kohl is, in fact, the safest Helmut.
SnowJob is offline  
Old 01-01-14, 12:05 AM
  #18  
david58
Senior Member
 
david58's Avatar
 
Join Date: Jun 2011
Location: Los Alamos, NM
Posts: 1,846

Bikes: Fuji Cross Comp, BMC SR02, Surly Krampas

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by SnowJob
No, sorry, the correct answer is Helmut Kohl. Helmut Kohl is, in fact, the safest Helmut.
Depends on your political leanings as to whether or not there is agreement on that one. But Helmut was, in my mind, a safe Helmut.
david58 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mrblue
Road Cycling
54
08-03-17 01:22 PM
ganchan
General Cycling Discussion
13
10-19-15 12:59 PM
TheManShow
General Cycling Discussion
0
08-04-15 07:06 PM
dscobbie
General Cycling Discussion
1
07-16-15 08:51 AM
thump55
Road Cycling
0
02-25-10 10:23 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.