1-1/8 quill size?
#1
Newbie
Thread Starter
1-1/8 quill size?
Super basic stuff: bike is a 96 or 97 Pinarello Stelvio as far as I can tell. Original owner was a bit taller than I, especially from the waist up. What is the correct quill and clamp diameter for 1-1/8 threaded steerer with 3ttt Supercriterium Ergo Power II bars? This stem is way too long.
Please excuse my ignorance, and thanks.
Please excuse my ignorance, and thanks.
#2
cowboy, steel horse, etc
Join Date: Sep 2008
Location: The hot spot.
Posts: 44,994
Bikes: everywhere
Mentioned: 74 Post(s)
Tagged: 1 Thread(s)
Quoted: 12860 Post(s)
Liked 7,775 Times
in
4,124 Posts
I'd really be surprised if that has a 1-1/8" steerer.
Most likely 1" steerer with 22.2mm quill stem.
I would guess 26.0 mm bar clamp dimension. 3T did make some stuff in 26.4 but I don't think Ritchey ever did, but...
Most likely 1" steerer with 22.2mm quill stem.
I would guess 26.0 mm bar clamp dimension. 3T did make some stuff in 26.4 but I don't think Ritchey ever did, but...
Likes For LesterOfPuppets:
#3
Newbie
Thread Starter
Oh wait. Its the ID. I should have looked more. Thank you.
Likes For birdly:
#4
Newbie
Thread Starter
so I went and got some cheap metric calipers and I read a tiny bit on what I should actually be measuring. I was not looking in the right places at all. You are correct about the quill of course, but I measure the bars at the clamp to be 25.6mm. (And this is why I hate cheap tools.) May I assume that this is in range of a 26mm clamp, with or without a shim?
#5
Senior Member
Join Date: Apr 2011
Posts: 7,245
Mentioned: 43 Post(s)
Tagged: 0 Thread(s)
Quoted: 4521 Post(s)
Liked 1,664 Times
in
1,092 Posts
so I went and got some cheap metric calipers and I read a tiny bit on what I should actually be measuring. I was not looking in the right places at all. You are correct about the quill of course, but I measure the bars at the clamp to be 25.6mm. (And this is why I hate cheap tools.) May I assume that this is in range of a 26mm clamp, with or without a shim?
Likes For Kontact: