I'm at a crossroad. What would you do?
#1
Senior Member
Thread Starter
I'm at a crossroad. What would you do?
I bought 2 best up bikes for $20. I repaired 1 already, cost about $120 for parts. The bike is probably worth $50-80, but I felt it was worth it for me so I'm not complaining.
The second bike though will be more expensive as more parts on it are damaged. I haven't tallied up or estimated a cost yet, but I kept setting the number going up as I disassembled it.
It's a 1992 Nishiki Fusion mountain bike hardtail. It seems like a rare bike, but there's nothing special about it. Was made by Raleigh, the first year they bought Nishiki. I'm contemplating on moving forward or scraping it? My only gain would be the experience made and fun in doing it, but is it worth the cost? I contemplated buying a donor bike for parts, but I'm finding donor bikes to be in better shape than this one, so I may as well fix that bike and I'm left with the same dilemma.
Parts List...
Frame is cromoly steel, in good condition with light rust in spots
Has shimano deore lx groupset, 3x7 speed.
Crank top 2 gears are worn, want to replace them
Front brake/shifter combo broken
Rear brake/shifter I can maybe salvage
Needs both wheels, tires, tubes
Cassette is smooth, can salvage it
Needs cables, seat, grips,pedals
BB is an old style, pretty rough from rust, I think I can clean it up, but probably not worth it
Headset bearings and races are rusted up good
Derailleurs are smooth and tight, just need cleaned and lubed.
Brakes are cantilever, in good shape.
The second bike though will be more expensive as more parts on it are damaged. I haven't tallied up or estimated a cost yet, but I kept setting the number going up as I disassembled it.
It's a 1992 Nishiki Fusion mountain bike hardtail. It seems like a rare bike, but there's nothing special about it. Was made by Raleigh, the first year they bought Nishiki. I'm contemplating on moving forward or scraping it? My only gain would be the experience made and fun in doing it, but is it worth the cost? I contemplated buying a donor bike for parts, but I'm finding donor bikes to be in better shape than this one, so I may as well fix that bike and I'm left with the same dilemma.
Parts List...
Frame is cromoly steel, in good condition with light rust in spots
Has shimano deore lx groupset, 3x7 speed.
Crank top 2 gears are worn, want to replace them
Front brake/shifter combo broken
Rear brake/shifter I can maybe salvage
Needs both wheels, tires, tubes
Cassette is smooth, can salvage it
Needs cables, seat, grips,pedals
BB is an old style, pretty rough from rust, I think I can clean it up, but probably not worth it
Headset bearings and races are rusted up good
Derailleurs are smooth and tight, just need cleaned and lubed.
Brakes are cantilever, in good shape.
#2
Senior Member
Join Date: Jun 2005
Location: Kentucky
Posts: 2,601
Bikes: 06 Lemond Reno, 98 GT Timberline mtn.bike
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 427 Post(s)
Liked 700 Times
in
436 Posts
If it was me, I'd scrap it. Strip off the good parts, and if I saw a good deal pop up, maybe a bike that needed the parts I saved, then I might go for it. Will the good parts on the Nishiki work with the bike you fixed up-if yes, keep the parts as spares.
#3
Clark W. Griswold
Join Date: Mar 2014
Location: ,location, location
Posts: 13,525
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 4357 Post(s)
Liked 3,994 Times
in
2,665 Posts
It is up to you. Do you want to put money towards an old mid level bike in rough shape? I may not want to do that but I may strip what parts are still good and functional and keep those for the parts bin. I like to keep a well stocked parts bin with all sorts of fun stuff. Having built 4 parts bin bikes and having parts for more is pretty great.
#4
Senior Member
Thread Starter
Good enough for me. If I only needed a few things I'd do it. But this bike just needs too much.
Thanks 👍 it's going to the recycling center with my aluminum cans
Thanks 👍 it's going to the recycling center with my aluminum cans
#5
Senior Member
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225
Bikes: Catrike 559 I own some others but they don't get ridden very much.
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1572 Post(s)
Liked 643 Times
in
364 Posts
The real question is what do you plan do do with the bike after you fix it up?
If your objective is to sell it, you need to shop what comparable bikes are selling for locally. Don't put more money than that into it.
If your objective is to ride it yourself, do whatever it takes to make you happy. Lots of guys buy $1,000 bikes every day. You can have just as much fun as they do riding your rebuilt bike.
If your objective is to sell it, you need to shop what comparable bikes are selling for locally. Don't put more money than that into it.
If your objective is to ride it yourself, do whatever it takes to make you happy. Lots of guys buy $1,000 bikes every day. You can have just as much fun as they do riding your rebuilt bike.
__________________
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
#6
Senior Member
If the frame is not damaged, put it on CL for $5 after stripping off the parts you want.
#7
Senior Member
Thread Starter
The real question is what do you plan do do with the bike after you fix it up?
If your objective is to sell it, you need to shop what comparable bikes are selling for locally. Don't put more money than that into it.
If your objective is to ride it yourself, do whatever it takes to make you happy. Lots of guys buy $1,000 bikes every day. You can have just as much fun as they do riding your rebuilt bike.
If your objective is to sell it, you need to shop what comparable bikes are selling for locally. Don't put more money than that into it.
If your objective is to ride it yourself, do whatever it takes to make you happy. Lots of guys buy $1,000 bikes every day. You can have just as much fun as they do riding your rebuilt bike.
#9
Senior Member
Thread Starter
Oneder that's a good idea, and I did think about that. I don't think I'm going to keep it though. My garage is already overran with things I don't need more. I'm not attached to the frame in any way and I don't think it's worth much. I'm assuming it was a retail store bike.
Last edited by Dwillems26; 04-30-20 at 06:41 PM.
Likes For Dwillems26:
#10
SE Wis
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 10,515
Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400, 2013 Novara Randonee, 1990 Trek 970
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 2747 Post(s)
Liked 3,398 Times
in
2,057 Posts
You might be surprised what you can do parting out certain bikes or items.
https://www.ebay.com/sch/i.html?_fsr...&LH_Complete=1
https://www.ebay.com/sch/i.html?_fsr...&LH_Complete=1
#11
Senior Member
Thread Starter
You might be surprised what you can do parting out certain bikes or items.
https://www.ebay.com/sch/i.html?_fsr...&LH_Complete=1
https://www.ebay.com/sch/i.html?_fsr...&LH_Complete=1
#12
Senior Member
Join Date: Jun 2015
Location: Down Under
Posts: 1,936
Bikes: A steel framed 26" off road tourer from a manufacturer who thinks they are cool. Giant Anthem. Trek 720 Multiroad pub bike. 10 kids bikes all under 20". Assorted waifs and unfinished projects.
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 1188 Post(s)
Liked 1,154 Times
in
640 Posts
At the very least you'll be up for new cantis. Those Shimano pads are almost unobtainium, and the NOS ones are so old they are as hard as bricks, I have a bunch of them I got from a closing LBS. Normal pads can be sort of made to fit, but not very well...
Other than that, it'd make a good starting out tourer with a set of butterflies.
I wouldn't say those chainrings are super worn, they had those lower teeth near the shifting pins from stock.
Other than that, it'd make a good starting out tourer with a set of butterflies.
I wouldn't say those chainrings are super worn, they had those lower teeth near the shifting pins from stock.
#13
Dirty Heathen
Join Date: Oct 2015
Location: MC-778, 6250 fsw
Posts: 2,182
Bikes: 1997 Cannondale, 1976 Bridgestone, 1998 SoftRide, 1989 Klein, 1989 Black Lightning #0033
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 889 Post(s)
Liked 906 Times
in
534 Posts
1992, Shimano LX? Sounds like a bike that would have been $300-$400 back in the day, entry level LBS stuff most likely.
You’re right, though, that it would take $100 in parts to make that into a $50 bike. Good news is that that era and style of bike was really standardized across the brands, so it’s no big deal to cull parts from a couple or three ‘basket cases’ to make a complete bike. Don’t feel like you need to save them all.
I’d keep this one for the parts.
You’re right, though, that it would take $100 in parts to make that into a $50 bike. Good news is that that era and style of bike was really standardized across the brands, so it’s no big deal to cull parts from a couple or three ‘basket cases’ to make a complete bike. Don’t feel like you need to save them all.
I’d keep this one for the parts.
#14
Senior Member
#15
Senior Member
#16
Senior Member
Looks like a juvenile size bike w/24" wheels to me. Drop it off at the nearest bike co-op.
#17
Senior Member
Join Date: Jul 2008
Location: 25 miles northwest of Boston
Posts: 29,552
Bikes: Bottecchia Sprint, GT Timberline 29r, Marin Muirwoods 29er, Trek FX Alpha 7.0
Mentioned: 112 Post(s)
Tagged: 0 Thread(s)
Quoted: 5224 Post(s)
Liked 3,584 Times
in
2,344 Posts
as yes, get a cheap junker, they get doner bikes ... it was fun for a cpl years but I'll never do that again. still remembering getting ride of 14 bikes or frames within a cpl months. happy to say we have only working bikes in our small basement, w/ the exception of a cpl wheels & other small parts
whether or not something is worth doing is totally up to you. let me throw this at you: get rid of the junk & go ride a bike. bingo, how did that make you feel? releaved? was I off target? is your passion still in wrenching? would it be a relief to be over the wreck wrenching? then there's your answer
whether or not something is worth doing is totally up to you. let me throw this at you: get rid of the junk & go ride a bike. bingo, how did that make you feel? releaved? was I off target? is your passion still in wrenching? would it be a relief to be over the wreck wrenching? then there's your answer
#18
Half way there
Join Date: Sep 2015
Location: North Carolina
Posts: 2,957
Bikes: Many, and the list changes frequently
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 986 Post(s)
Liked 880 Times
in
527 Posts
Donate it to a local bike co-op if you are lucky enough to have one nearby. Actually, if you do have access to a co-op, join it you can probably get that bike nicely functional for little outlay.