Go Back  Bike Forums > Bike Forums > Commuting
Reload this Page >

Thinner tire sizes for mountain bike

Notices
Commuting Bicycle commuting is easier than you think, before you know it, you'll be hooked. Learn the tips, hints, equipment, safety requirements for safely riding your bike to work.

Thinner tire sizes for mountain bike

Old 07-02-19, 04:09 PM
  #1  
MrProsser
Newbie
Thread Starter
 
Join Date: Jul 2019
Posts: 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Thinner tire sizes for mountain bike

I recently got a bike from a friend and I would like to use it for commuting, and generally getting around town. This means it will largely be driven on pavement, and the most off-road use it will see will be on very fine crushed rock walking paths. However, it needs a bit of love, especially the tires which are badly worn. The current setup is a bit weird, with a front tire that is 26"x1.95" on a 559x18 rim, and a rear tire that is 26"x1.75" with a 559x27 rim. I would like to move to a thinner slick, but I am not quite sure how low I can go. I've seen a few threads like this one:
https://www.bikeforums.net/commuting/...tain-bike.html

which include links suggesting that the front could go as low as 1.1" or so, but I am not sure about the back. One of the examples on that thread mentioned they moved from 2.125" to 1.5" which would be fine with me, but they do not mention the rim size. Anyway, I was wondering if anyone had experience with this, or knows of a lower limit I should make sure to shy away from for each of those rims.
MrProsser is offline  
Old 07-02-19, 04:44 PM
  #2  
Darth Lefty 
Disco Infiltrator
 
Darth Lefty's Avatar
 
Join Date: May 2013
Location: Folsom CA
Posts: 13,775

Bikes: Stormchaser, Paramount, Tilt, Samba tandem

Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 3126 Post(s)
Liked 2,102 Times in 1,366 Posts
1.5 inch is good.

One of the wheels was likely changed out at some point, most likely due to damage or theft.
__________________
Genesis 49:16-17
Darth Lefty is offline  
Old 07-02-19, 04:44 PM
  #3  
Gresp15C
Senior Member
 
Gresp15C's Avatar
 
Join Date: Sep 2014
Posts: 3,893
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1062 Post(s)
Liked 665 Times in 421 Posts
There's a note at the end of this page about tire widths:

https://www.sheldonbrown.com/tire-sizing.html
Gresp15C is offline  
Old 07-02-19, 04:47 PM
  #4  
Cyclist0108
Occam's Rotor
 
Join Date: Jul 2013
Posts: 7,248
Mentioned: 61 Post(s)
Tagged: 0 Thread(s)
Quoted: 2366 Post(s)
Liked 2,331 Times in 1,164 Posts
Originally Posted by MrProsser
I recently got a bike from a friend and I would like to use it for commuting, and generally getting around town. This means it will largely be driven on pavement, and the most off-road use it will see will be on very fine crushed rock walking paths. However, it needs a bit of love, especially the tires which are badly worn. The current setup is a bit weird, with a front tire that is 26"x1.95" on a 559x18 rim, and a rear tire that is 26"x1.75" with a 559x27 rim. I would like to move to a thinner slick, but I am not quite sure how low I can go. I've seen a few threads like this one:
https://www.bikeforums.net/commuting/...tain-bike.html

which include links suggesting that the front could go as low as 1.1" or so, but I am not sure about the back. One of the examples on that thread mentioned they moved from 2.125" to 1.5" which would be fine with me, but they do not mention the rim size. Anyway, I was wondering if anyone had experience with this, or knows of a lower limit I should make sure to shy away from for each of those rims.

Get some of these and forget about narrow -- go as wide as will fit:

https://www.renehersecycles.com/prod...tires/26-inch/
Cyclist0108 is offline  
Likes For Cyclist0108:
Old 07-02-19, 04:52 PM
  #5  
no motor?
Unlisted member
 
no motor?'s Avatar
 
Join Date: Dec 2005
Location: Chicagoland
Posts: 6,193

Bikes: Specialized Hardrock

Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 1376 Post(s)
Liked 432 Times in 297 Posts
I've used 26x1.5 on my MTB commuter for about 10 years and my next tires will be wider. The Performance slicks I used were pretty stable, but the ones I replaced them with are too squirrelly for me now.
no motor? is offline  
Likes For no motor?:
Old 07-02-19, 07:46 PM
  #6  
AusTexMurf
Senior Member
 
AusTexMurf's Avatar
 
Join Date: Dec 2012
Location: South Austin, Texas
Posts: 919

Bikes: 2010 Origin8 CX700, 2003 Cannondale Backroads Cross Country, 1997 Trek mtn steel frame converted commuter/tourer, 1983 Univega Sportour, 2010 Surly LHT, Others...

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 48 Post(s)
Liked 15 Times in 12 Posts
I like the Continental Travel Contacts and their 26X1.75 rides like a narrower tire on hardpack. Pressure can be dropped off road. Very versatile, smooth and easy rolling, durable, and flat resistant.

The Panaracer TServ is a nice tire for a 26" mtn bike commuter as well. Available in 1.25, 1.5, and 1.75. The 1.75 - 2.0 width on a 26 tire is the sweet spot for me.
AusTexMurf is offline  
Likes For AusTexMurf:
Old 07-02-19, 08:21 PM
  #7  
Reynolds 
Passista
 
Reynolds's Avatar
 
Join Date: Jul 2005
Posts: 7,586

Bikes: 1998 Pinarello Asolo, 1992 KHS Montaña pro, 1980 Raleigh DL-1, IGH Hybrid, IGH Utility

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 866 Post(s)
Liked 711 Times in 392 Posts
Tire size is third to suppleness and tread pattern IMO. I'd go for a supple wall, non-knobby tire in 1.5/1.9.
Reynolds is offline  
Likes For Reynolds:
Old 07-03-19, 12:42 AM
  #8  
GUMK
Junior Member
 
Join Date: Apr 2019
Location: Washington, Tyne & Wear
Posts: 13

Bikes: Marin Muirwoods 29er

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 5 Times in 4 Posts
Originally Posted by Darth Lefty
1.5 inch is good.

One of the wheels was likely changed out at some point, most likely due to damage or theft.
​​​​​
I was in a very similar situation to the OP, gifted an old MTB to commute with. I gradually worked my way down to 1.5 slicks and now use that width on my latest commuter.
GUMK is offline  
Old 07-03-19, 06:45 AM
  #9  
BobbyG
Senior Member
 
BobbyG's Avatar
 
Join Date: Jan 2009
Location: Colorado Springs, CO
Posts: 5,962

Bikes: 2015 Charge Plug, 2007 Dahon Boardwalk, 1997 Nishiki Blazer, 1984 Nishiki International, 2006 Felt F65, 1989 Dahon Getaway V

Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 1359 Post(s)
Liked 1,658 Times in 822 Posts
Long story short: My main commuter from 1997 to 2015 was a mountain bike with 26" wheels. I have put about every type of tire on it. Wide, thin, tread, slick and hybrid (smooth center section, knobby shoulders...very bad all around). 1.5" slicks are the narrowest I'd go. I now run 1.85 slicks and am very, very happy.

In the winter it wears 1.65 studded snow tires with aggressive tread. Those are not so great on dry pavement, but incredible on snow and ice.
BobbyG is offline  
Likes For BobbyG:
Old 07-03-19, 10:32 AM
  #10  
Darth Lefty 
Disco Infiltrator
 
Darth Lefty's Avatar
 
Join Date: May 2013
Location: Folsom CA
Posts: 13,775

Bikes: Stormchaser, Paramount, Tilt, Samba tandem

Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 3126 Post(s)
Liked 2,102 Times in 1,366 Posts
Originally Posted by mtb_addict
The problem is that thinner sizes changes the geometry of the bike (handling).
Just because a thing happens doesn't mean it's a problem.
__________________
Genesis 49:16-17
Darth Lefty is offline  
Old 07-03-19, 11:02 AM
  #11  
ThermionicScott 
working on my sandal tan
 
ThermionicScott's Avatar
 
Join Date: Aug 2011
Location: CID
Posts: 22,625

Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)

Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3868 Post(s)
Liked 2,560 Times in 1,574 Posts
Originally Posted by no motor?
I've used 26x1.5 on my MTB commuter for about 10 years and my next tires will be wider. The Performance slicks I used were pretty stable, but the ones I replaced them with are too squirrelly for me now.
Similar for me. I've been on 26"x1.75" tires for years, gonna try to fit 2.1" Rat Trap Pass next time around.
__________________
Originally Posted by chandltp
There's no such thing as too far.. just lack of time
Originally Posted by noglider
People in this forum are not typical.
RUSA #7498
ThermionicScott is offline  
Likes For ThermionicScott:
Old 07-05-19, 12:03 PM
  #12  
Eric S.
Senior Member
 
Eric S.'s Avatar
 
Join Date: Aug 2005
Location: Las Vegas, NV
Posts: 932

Bikes: '04 LeMond Buenos Aires, '82 Bianchi Nuova Racing, De Rosa SLX, Bridgestone MB-1, Guerciotti TSX, Torpado Aelle, LeMond Tourmalet 853, Bridgestone Radac

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 101 Post(s)
Liked 46 Times in 36 Posts
Nashbar used to offer house-brand Kevlar-belted 26x1.25 tires that I used for a long time. I forget their pressure rating; maybe 90psi.

I now ride Continental Tour Ride/Ride Tour 26x1.75 at 60psi. They roll fast and I've not had a single flat in 3 years. They're also affordable - less than $25 online.
Eric S. is offline  
Likes For Eric S.:
Old 07-07-19, 01:09 PM
  #13  
fietsbob
Banned
 
Join Date: Jun 2010
Location: NW,Oregon Coast
Posts: 43,598

Bikes: 8

Mentioned: 197 Post(s)
Tagged: 0 Thread(s)
Quoted: 7607 Post(s)
Liked 1,354 Times in 861 Posts
Only issue I had with Continental Travel Contacts , was I got quite bored

with all the 'experts' pointing out my once knobby tire was worn smooth in the center/...






/...
fietsbob is offline  
Likes For fietsbob:
Old 07-07-19, 02:57 PM
  #14  
zacster
Senior Member
 
Join Date: Jul 2004
Location: Brooklyn NY
Posts: 7,702

Bikes: Kuota Kredo/Chorus, Trek 7000 commuter, Trek 8000 MTB and a few others

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 22 Post(s)
Liked 456 Times in 358 Posts
I use 26" Gatorskins on my commuter. The rims are Mavic XM317s which specify a tire width of 1.5 to 2.1, but the Gatorskins are 26x1 1/8. I've been using them for years and I'm on my second pair. No issues at all.
zacster is offline  
Old 07-08-19, 10:43 AM
  #15  
chas58
Senior Member
 
chas58's Avatar
 
Join Date: Jul 2010
Location: Michigan
Posts: 4,863

Bikes: too many of all kinds

Mentioned: 35 Post(s)
Tagged: 0 Thread(s)
Quoted: 1147 Post(s)
Liked 415 Times in 335 Posts
I agree. 1.5 slick is about ideal.

I've used the 26x1 1/8 gatorskins (and 1" panaracers), and they do nothing for the bike. Technically they are a little slower unless you are riding on new pavement - but that is a different story. High pressure doesn't make you faster.

WGScott is probably right (go big or go home), but there are some good selections for fast commuter slicks in the 1.5 size - it gets harder to find as you go larger. Sure - you could go for reneherse tires - but those are rather exotic - not the most durable tire for commuting.
chas58 is offline  
Old 07-08-19, 10:47 AM
  #16  
chas58
Senior Member
 
chas58's Avatar
 
Join Date: Jul 2010
Location: Michigan
Posts: 4,863

Bikes: too many of all kinds

Mentioned: 35 Post(s)
Tagged: 0 Thread(s)
Quoted: 1147 Post(s)
Liked 415 Times in 335 Posts
47mm is the answer to your unanswered question. Here is the official chart. Take it with a grain of salt - I've gone outside the boundaries. But its a good benchmark.




Originally Posted by MrProsser
I recently got a bike from a friend....
chas58 is offline  
Old 07-08-19, 04:58 PM
  #17  
Reynolds 
Passista
 
Reynolds's Avatar
 
Join Date: Jul 2005
Posts: 7,586

Bikes: 1998 Pinarello Asolo, 1992 KHS Montaña pro, 1980 Raleigh DL-1, IGH Hybrid, IGH Utility

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 866 Post(s)
Liked 711 Times in 392 Posts
Originally Posted by mtb_addict
you get more flats with supple tires...if your commute is strewed with debries.

if you decide to take your supple tires on mtb trails, they also more likely to get cut up.
Of course it's a compromise, but I meant sidewall suppleness, which has a big effect on ride quality. The op didn't mention trail riding.
Reynolds is offline  
Old 07-08-19, 08:55 PM
  #18  
Darth Lefty 
Disco Infiltrator
 
Darth Lefty's Avatar
 
Join Date: May 2013
Location: Folsom CA
Posts: 13,775

Bikes: Stormchaser, Paramount, Tilt, Samba tandem

Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 3126 Post(s)
Liked 2,102 Times in 1,366 Posts
We mostly don't run cotton clinchers or tubulars on commuter bikes either
__________________
Genesis 49:16-17
Darth Lefty is offline  
Old 07-08-19, 10:48 PM
  #19  
alan s 
Senior Member
 
alan s's Avatar
 
Join Date: Oct 2007
Location: Washington, DC
Posts: 6,977
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1496 Post(s)
Liked 189 Times in 128 Posts
Schwalbe Marathon Supremes. The answer to all tire questions. If you want to know what bike to get, Surly LHT.
alan s is offline  
Old 07-09-19, 06:10 PM
  #20  
schiavonec
Senior Member
 
Join Date: May 2004
Posts: 146
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
I have schwalbe landcruisers in 2" which work for your rim widths. Cheap, but heavy and very durable overall. I traverse tons of glass due to inconsiderate yahoos and am flat free for a year and 1/2 of 60% commuting. knock on wood
schiavonec is offline  
Old 07-10-19, 11:11 AM
  #21  
chas58
Senior Member
 
chas58's Avatar
 
Join Date: Jul 2010
Location: Michigan
Posts: 4,863

Bikes: too many of all kinds

Mentioned: 35 Post(s)
Tagged: 0 Thread(s)
Quoted: 1147 Post(s)
Liked 415 Times in 335 Posts
depends what you mean by supple.
high thread count tires tend to be harder to puncture but easier to tear
low thread count tires (with thicker cords) tend to be a little easier to puncture, but harder to tear. That works well with tubless as the sealant can easily repair a small hole, but not a gash.

but of course if we are talking sidewall - supple tires have thin sidewalls. I don't tend to get sidewall cuts on pavement - just gravel and off road.
chas58 is offline  
Old 07-22-19, 09:52 AM
  #22  
metz1295
Full Member
 
metz1295's Avatar
 
Join Date: Mar 2014
Location: Dayton, OH
Posts: 319

Bikes: '97 Cannondale M500; '14 Specialized Secteur Compact; '21 Trek Roscoe 7

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 25 Post(s)
Liked 17 Times in 12 Posts
My Cannondale was considered a mountain bike with no front shock when I bought it in 1995. These days it would be considered a hybrid or commuter. It came with knobby tires intended for dirt use. Over the years, it has become the trailer hauler for when the boys would get pulled behind. To make like easier, I ditched the knobbies for a much smoother ride. I attached a pic of the tires I have on it now. Unfortunately, I don't have a size for you. I do commute, but I use my road bike. I have Gatorskins on it and would recommend them highly.

metz1295 is offline  
Old 07-22-19, 05:46 PM
  #23  
DorkDisk
Senior Member
 
Join Date: May 2013
Location: Kips Bay, NY
Posts: 2,212

Bikes: Ritchey Swiss Cross | Teesdale Kona Hot | Haro Extreme | Specialized Stumpjumper Comp | Cannondale F1000 | Shogun 1000 | Cannondale M500 | Norco Charger | Marin Muirwoods 29er | Shogun Kaze | Breezer Lightning

Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 576 Post(s)
Liked 991 Times in 484 Posts
Like others, I've been on various widths and styles since '90 but now I use fat slicks. Maxxis DTH is my current fave, I have four pairs now and need to get some more for my other 26ers. They are fast, light, and cheap, but not the most durable.

This is my Stumpjumper which I commute on via Old Croton Acqueduct Trail (mild trail), South County Trail (Paved+very mild trail), and the streets of Manhattan and the DTHs handle it all with no issues. The other week the S County was super muddy but these tires just floated right over the soup.

DorkDisk is offline  
Likes For DorkDisk:
Old 07-22-19, 05:55 PM
  #24  
Bluesfrog
Senior Member
 
Join Date: Jul 2019
Posts: 163
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 32 Post(s)
Liked 19 Times in 18 Posts
Lots of knowledge here. The OP just needs to digest it and make a decision. Be Well. Bluesfrog
Bluesfrog is offline  
Old 07-23-19, 08:52 AM
  #25  
jade408
Senior Member
 
Join Date: May 2014
Posts: 1,532

Bikes: Working on replacing my stolen Soma Buena Vista Mixte

Mentioned: 21 Post(s)
Tagged: 0 Thread(s)
Quoted: 417 Post(s)
Liked 95 Times in 44 Posts
I have these on my new bike in 650b. No long term review yet, but they feel awesome. https://global.bluelug.com/fairweath...kin-11320.html
jade408 is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.