Older Touring Bike
#1
Full Member
Thread Starter
Older Touring Bike
A few years ago I got back into bicycling after a forty year absence and my first touring bike was a used Novara Safari REI bike. I didn’t get along with it. The butterfly bars and plastic twisty shifters didn’t work out for me. A week ago I purchased a 1997 Trek 520 for a good price. That bike seems a lot like an 80s mountain bike with drop bars. So...I was kinda still looking.
Yesterday I bought a 1984 Trek 720, 24” frame. I liked the maroon color, it was in good shape for an older bike and it looked more like the bicycles I remember when I was a roadie. I didn’t research the 84 Trek 720 until after I made the purchase. I am pleasantly surprised.
I found the year from the serial number and notice that some of the components have been changed over the years, most notably the wheel change from 27” to 700c. I’ve been reading posts about the 720 to see what’s what.
i would normally ride a one size larger frame with a cozy stem so I’m thinking I can make this size frame work. I know already that I’ll probably get a quill stem adapter to raise the bars up closer to seat level. The older bars seem a bit narrow from what I’ve gotten used to so maybe another set of dropbars too.
I attempted to post a couple photos. I think may need to reduce the file size first.
Yesterday I bought a 1984 Trek 720, 24” frame. I liked the maroon color, it was in good shape for an older bike and it looked more like the bicycles I remember when I was a roadie. I didn’t research the 84 Trek 720 until after I made the purchase. I am pleasantly surprised.
I found the year from the serial number and notice that some of the components have been changed over the years, most notably the wheel change from 27” to 700c. I’ve been reading posts about the 720 to see what’s what.
i would normally ride a one size larger frame with a cozy stem so I’m thinking I can make this size frame work. I know already that I’ll probably get a quill stem adapter to raise the bars up closer to seat level. The older bars seem a bit narrow from what I’ve gotten used to so maybe another set of dropbars too.
I attempted to post a couple photos. I think may need to reduce the file size first.
Likes For Sjtaylor:
#2
Banned
720 model lives on, but the components they get now are different & to meet customer cost expectations
they are not made in Wisconsin any more..
Look into Nitto technomic stems they have a much longer quill shaft,,
they are not made in Wisconsin any more..
Look into Nitto technomic stems they have a much longer quill shaft,,
Last edited by fietsbob; 06-30-20 at 04:38 PM.
#3
Full Member
Thread Starter
Thanks Fietsbob! That stem will work. The stem on my new 720 has a sort of collet locking device in stead of the wedged lug and is super short. I’m going to check it out.
#4
Senior Member
Join Date: Oct 2017
Posts: 2,043
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 837 Post(s)
Liked 1,080 Times
in
521 Posts
Awesome, just bought one of these myself from a forum member, it’s on its way to me as we speak. Mine is a 1985 model which I believe is the exact same frame with slightly different decals. You did good especially for not having known what it was first! Alongside the Miyata 1000 and the Specialized Expedition the 720 is considered one of the best touring bikes of the 80’s, and some still consider them so.
Post some more pics up if you’ve got them! How are you enjoying the ride? I’ve already got some light touring planned with it for the fall.
Post some more pics up if you’ve got them! How are you enjoying the ride? I’ve already got some light touring planned with it for the fall.
Last edited by polymorphself; 07-03-20 at 10:15 AM.
#5
Senior Member
Join Date: Sep 2012
Location: Upstate South Carolina
Posts: 1,092
Bikes: 1980's Spectrum 10 sp Campagnolo Centaur, 1990 Eddy Merckx 10 sp Campagnolo Centaur, Bushnell Tandem, Co-Motion Speedster Tandem
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 185 Post(s)
Liked 102 Times
in
65 Posts
Fun seeing this as I would have scheduled it through the factory. This is such a beautiful bike and one to really enjoy. If you change out your bars you may want to offer that bar and stem up on the Vintage group here as it would have some value. I can't tell from the picture if it is a Cinelli 1A stem with 64-40 bars. The Nitto Technomic stem is a great option and you can find a compact bar in in that diameter in widths of 42, 44 and maybe even 46 pretty easily. I'd love to find one of these in 25". Enjoy
#6
Banned
here is one for sale, made by a famous American frame builder ..
https://seattle.craigslist.org/see/b...153572598.html
https://seattle.craigslist.org/see/b...153572598.html
Likes For fietsbob:
#7
Senior Member
Join Date: Jun 2014
Location: Ontario, Canada
Posts: 4,624
Bikes: iele Latina, Miele Suprema, Miele Uno LS, Miele Miele Beta, MMTB, Bianchi Model Unknown, Fiori Venezia, Fiori Napoli, VeloSport Adamas AX
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1324 Post(s)
Liked 927 Times
in
640 Posts
An adjustable quill stem works wonders and allows you to lower the stem later if you want to. Or an upward angled quil stem works well too.
Cheers
Cheers
#8
Senior Member
Join Date: Aug 2005
Posts: 3,871
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 598 Post(s)
Liked 283 Times
in
194 Posts
I realize the advantages of today's threadless headsets and their corresponding stems/spacers but at times I do miss those earlier simple design quill stems which allowed for so much height adjustmentl.
#9
Senior Member
Join Date: Aug 2010
Location: Madison, WI
Posts: 11,199
Bikes: 1961 Ideor, 1966 Perfekt 3 Speed AB Hub, 1994 Bridgestone MB-6, 2006 Airnimal Joey, 2009 Thorn Sherpa, 2013 Thorn Nomad MkII, 2015 VO Pass Hunter, 2017 Lynskey Backroad, 2017 Raleigh Gran Prix, 1980s Bianchi Mixte on a trainer. Others are now gone.
Mentioned: 48 Post(s)
Tagged: 0 Thread(s)
Quoted: 3459 Post(s)
Liked 1,465 Times
in
1,143 Posts
A few years ago I fixed up an old Italian racing bike I had bought used decades ago and then put in storage a few decades ago. I instead opted for the quill to threadless adapter. The one I got was cheap a few years ago from Nashbar, but I suspect that a Velo Orange one would give more height. My bars were also way too narrow, needed new bars, chose to go all out with other upgrades, used new brake levers and interrupter brake levers too. The threadless adapter meant I had less adjustability for height, but I could swap out stems easily to tweak reach.
Retained the 60s vintage Mafac brakes.
Retained the 60s vintage Mafac brakes.
Last edited by Tourist in MSN; 07-13-20 at 09:19 AM.
Likes For Tourist in MSN:
#10
Senior Member
Join Date: Aug 2010
Location: Madison, WI
Posts: 11,199
Bikes: 1961 Ideor, 1966 Perfekt 3 Speed AB Hub, 1994 Bridgestone MB-6, 2006 Airnimal Joey, 2009 Thorn Sherpa, 2013 Thorn Nomad MkII, 2015 VO Pass Hunter, 2017 Lynskey Backroad, 2017 Raleigh Gran Prix, 1980s Bianchi Mixte on a trainer. Others are now gone.
Mentioned: 48 Post(s)
Tagged: 0 Thread(s)
Quoted: 3459 Post(s)
Liked 1,465 Times
in
1,143 Posts
I thought 1984 would have been 700c, so I looked it up, and you are correct, was 27 inch wheel size. (A friend of mine had a mid-80s Trek 720 and his was 700c.)
1984 Trek Bicycle Brochure Part 3 - Touring Bikes
I assume you also no longer have the Helicomatic rear hub, if I recall correcty that was a hub that did not hold up very well.
Great find.
1984 Trek Bicycle Brochure Part 3 - Touring Bikes
I assume you also no longer have the Helicomatic rear hub, if I recall correcty that was a hub that did not hold up very well.
Great find.
#12
Senior Member
#13
Senior Member
Join Date: Jun 2014
Location: Ontario, Canada
Posts: 4,624
Bikes: iele Latina, Miele Suprema, Miele Uno LS, Miele Miele Beta, MMTB, Bianchi Model Unknown, Fiori Venezia, Fiori Napoli, VeloSport Adamas AX
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1324 Post(s)
Liked 927 Times
in
640 Posts
#14
Senior Member
Looks good; that is the angle I am looking for on my old 520. Just ordered an adjustable one off ebay I believe it’s also a Kalloy.
#15
Partially Sane.
Join Date: Jan 2016
Location: Sunny Sacramento.
Posts: 3,559
Bikes: Soma Saga, pre-disc
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 972 Post(s)
Likes: 0
Liked 643 Times
in
468 Posts
Nice bike, congrats! 👍 Pretty decent grab for a newbie. 😁😉
I have an ‘85 Miyata six ten, with 27” Ukai rims, and Sansin Gyro-Master hubs (with Sunshine skewers). These things roll like crazy, especially on the downhills. 😎
I have an ‘85 Miyata six ten, with 27” Ukai rims, and Sansin Gyro-Master hubs (with Sunshine skewers). These things roll like crazy, especially on the downhills. 😎
#16
Not lost wanderer.
Join Date: Jan 2013
Location: Lititz, Pa
Posts: 3,325
Bikes: In USA; 73 Raleigh Super Course dingle speed, 72 Raleigh Gran Sport SS, 72 Geoffry Butler, 81 Centurion Pro-Tour, 74 Gugie Grandier Sportier
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 885 Post(s)
Liked 989 Times
in
521 Posts
I have 2 Centurion Pro-Tours both with riser stems
1983
1983
#17
Banned
nitto dirt drop stems are premium quality of that type https://www.rivbike.com/products/nit...nt=23337069825