Bar Tape on a Flatbar?
#1
Avatar Bandit
Thread Starter
Join Date: Jan 2007
Location: Murfreesboro, TN
Posts: 597
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Bar Tape on a Flatbar?
Has anyone here used cork tape or another kind of bar tape on their flatbar bikes? I hate my rubber grips and want to replace them with something a little more comforting and possibly something that is sweat absorbent.
#2
Senior Member
Join Date: Sep 2005
Location: Brooklyn, NY
Posts: 174
Bikes: '01 Trek Clyde 4-speed, Surly Cross-check ss/fg
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I haven't. As a new user of drop bars (and bar tape), I was surprised by how much cusioning it actually provides (I'm using cinelli cork tape).
That said, I would probably just look for some regular grips you like better because the edges of bar tape can get pulled up by lateral hand movement.
If you do decide to try the bar tape, you might ask at your LBS if they have some scraps left over from a wrap job that you could have.
That said, I would probably just look for some regular grips you like better because the edges of bar tape can get pulled up by lateral hand movement.
If you do decide to try the bar tape, you might ask at your LBS if they have some scraps left over from a wrap job that you could have.
#3
Tinkerer since 1980
Join Date: Sep 2006
Location: London
Posts: 922
Bikes: Coppi racer, Old school BMX, some random a fixed wheel convertion
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Looks like sheldon has it on the stoker bars of this bike https://www.sheldonbrown.org/picchio/
#4
Striving for Fredness
Join Date: Oct 2006
Location: West Michigan
Posts: 1,190
Bikes: Old Giant Rincon
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I put bar tape on my wrap around bars and love it. I can't believe the difference it makes in cushioning. I went to the wrap around bars because I was having problems with hand pain and numbness and wanted more hand positions, but now that I am using the bar tape I find I really don't need the extra positions because of the cushioning the tape provides although they are nice to have. Maybe some of the foam style MTB grips might offer similar cushioning?
#5
Senior Member
Join Date: Jul 2006
Location: Oakland, CA
Posts: 1,300
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
My first commute bike was a cruiser with those foam grips. They are incredibly comfortable but they wear out quick and can get stanky if you sweat on them. Switching from the foam to rubbery grips took a while to get used to.
#6
Senior Member
Join Date: May 2005
Location: New Orleans
Posts: 250
Bikes: Trek T80, Trek SU200, Trek SU100, Giant Bowery
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
i wrapped the bars on my SU100. was 1000x better than those crappy bontrager rubber grips.
#8
Senior Member
Join Date: Dec 2006
Posts: 3,693
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I'm not the OP, but I think the obvious follow-up question is: what's the preferred method for wrapping a flat bar? Any meaningful changes from wrapping drops?
#9
George Krpan
Join Date: Jan 2007
Location: Westlake Village, California
Posts: 1,708
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 12 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Check out Ergon grips, they rule.
https://aebike.com/page.cfm?action=de...=30&SKU=HT1707
https://aebike.com/page.cfm?action=de...=30&SKU=HT1707
#10
Full Member
I put some on my inboard mounted bar ends, almost a full drop bars worth - over some old grips. The end result is fairly thick, tapering in from the top to the bottom. I shaped it a little to suit my hand position. Lovely!
#11
Senior Member
Join Date: Jan 2006
Posts: 59
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Here's how you should wrap a flat bar bike- on both sides, your starting point is going to be closest to the stem. Keep it in place on both ends with a 1 inch strip of electrical tape.
I use Cinelli cork ribbon. I've found that in the rain it is 100 times superior to rubber grips (which are very slippery).
Also for a second hand position, install some bar ends.
Forgot to mention, you only need to wrap them once. Double wrapping is not necesarry. If you need extra padding consider using electrical tape underneath the Cork tape.
I use Cinelli cork ribbon. I've found that in the rain it is 100 times superior to rubber grips (which are very slippery).
Also for a second hand position, install some bar ends.
Forgot to mention, you only need to wrap them once. Double wrapping is not necesarry. If you need extra padding consider using electrical tape underneath the Cork tape.
#12
Senior Member
My brother has tape on his riser bars. Just a little longer than normal grips, and it's shellacked and twined and looks great. You could use all of the leftover tape to wrap your right chainstay.
#13
Junior Member
Join Date: Sep 2009
Location: Warminster, PA (N of Philly)
Posts: 23
Bikes: Trek FX 7.3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Just did this morning.
I did a search and came upon this thread. My partner wanted "baby blue bar tape" to make her bike pretty, so...
https://www.flickr.com/photos/rorowe/...in/photostream
We'll see how she likes it. And how long it lasts.
https://www.flickr.com/photos/rorowe/...in/photostream
We'll see how she likes it. And how long it lasts.
#14
Senior Member
Join Date: Mar 2011
Posts: 3,094
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1034 Post(s)
Liked 1,290 Times
in
743 Posts
I did it on my Ross Mt. Rainier. I used cork grips then wrapped the rest with black cork tape then shellacked them. I used jute twine to finish off the ends.
#15
Senior Member
Join Date: Aug 2008
Location: Madison, WI
Posts: 811
Bikes: '08 Trek 7.3FX
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Rubber grips are absolutely awful in the rain, even with gloves on. Cork/foam tape all the way.
#16
Senior Member
I have big hands and use a double wrap of bar tape, very comfy.
#17
Faster but still slow
Join Date: Jun 2006
Location: Jersey
Posts: 5,978
Bikes: Trek 830 circa 1993 and a Fuji WSD Finest 1.0 2006
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
I have those exact cork grips on my Trek that I built up into a city bike. They are awesomely comfortable. Because of the curves and the diameter, they are actually more comfortable than the bar tape on my road bike. Cork grips are nothing at all like rubber grips.
#18
Banned
I double wrap my Trekking Bars with 'cork' tape,, the older stuff as base layer.
got some Ergon grips for my Straight bars, they integrate a comfort grip
and bar end in a 1 bolt adjustable unit. . GC3
the Grip Shift length seems a bit too cozy narrow, think I'll add 3/4"
of old other grips.. .. on the inside end ..
they added a Biocork grip this season , I got the black rubber version..
got some Ergon grips for my Straight bars, they integrate a comfort grip
and bar end in a 1 bolt adjustable unit. . GC3
the Grip Shift length seems a bit too cozy narrow, think I'll add 3/4"
of old other grips.. .. on the inside end ..
they added a Biocork grip this season , I got the black rubber version..
Last edited by fietsbob; 07-19-11 at 12:21 PM.