Replacement wheel bearing cone
#1
Newbie
Thread Starter
Join Date: Jan 2024
Location: London
Posts: 5
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 3 Times
in
2 Posts
Replacement wheel bearing cone
Hi, I've stripped and repacked cup and cone bearings before but never actually had to replace a cone, till now.
The cone is for the rear wheel non-drive side (disc brake side) of a Kona ***** Inc (circa 2011) in a XERO branded hub (model unknown). The cone here has been damaged.
The Kona website models database doesn't go back this far, so I don't know what the hubs actually are.
Can anyone tell me where I could get a replacement cone?
I've looked around on the web but can't seem to find anything that looks quite the same.
It's a QR hub with M10 axle. The cone is 14mm deep with 15mm A/F nut. The dust cover part is 24mm dia.
(I would have included a photo, but I'm new to this forum, but it appears the system won't let me till I've made another 9 posts!)
Many thanks.
The cone is for the rear wheel non-drive side (disc brake side) of a Kona ***** Inc (circa 2011) in a XERO branded hub (model unknown). The cone here has been damaged.
The Kona website models database doesn't go back this far, so I don't know what the hubs actually are.
Can anyone tell me where I could get a replacement cone?
I've looked around on the web but can't seem to find anything that looks quite the same.
It's a QR hub with M10 axle. The cone is 14mm deep with 15mm A/F nut. The dust cover part is 24mm dia.
(I would have included a photo, but I'm new to this forum, but it appears the system won't let me till I've made another 9 posts!)
Many thanks.
#2
Full Member
Join Date: Jul 2023
Location: "Driftless" WI
Posts: 401
Bikes: 1972 Motobecane Grand Record, 2022 Kona Dew+
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 167 Post(s)
Liked 152 Times
in
113 Posts
Is it just the cone itself that's damaged? What's the condition of the hub's inner cup race? You mention the dust cover being 24mm, is that in good shape?
Having bought a Kona Dew+ last year I've noticed Kona doesn't make it easy to find specs for parts used on their products. Still, there's enough of them out there that somewhere the part you want is waiting for you. My half-century old Motobecane's Campy hubs use M10 axles too, as do many other brand hubs. That you're in London suggests there's got to be a number of bike shops around you that may very well have what you need in their collections of parts.
As for posting images... you can upload images to a Gallery you've set up before you reach than 10-post threshold. Other Forum members can then view your Gallery images at any time.
Having bought a Kona Dew+ last year I've noticed Kona doesn't make it easy to find specs for parts used on their products. Still, there's enough of them out there that somewhere the part you want is waiting for you. My half-century old Motobecane's Campy hubs use M10 axles too, as do many other brand hubs. That you're in London suggests there's got to be a number of bike shops around you that may very well have what you need in their collections of parts.
As for posting images... you can upload images to a Gallery you've set up before you reach than 10-post threshold. Other Forum members can then view your Gallery images at any time.
#3
Newbie
Thread Starter
Join Date: Jan 2024
Location: London
Posts: 5
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 3 Times
in
2 Posts
Yes, it's just the cone. The race in the cup looks to be good still. The dust cover (not sure that's the right term for it) is like a thick washer 2/3 of the way up the cone body.
Have just uploaded some images to the gallery.
Have just uploaded some images to the gallery.
#4
buy my bikes
Join Date: Jun 2014
Location: Michigan
Posts: 1,807
Bikes: my very own customized GUNNAR CrossHairs
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 521 Post(s)
Liked 438 Times
in
250 Posts
https://wheelsmfg.com/
i get replacement cones from Wheels Mfg
No returns on cones and bearings. So if you’ve not ordered from them before maybe work with your bike shop if you have a good relationship with them.
good luck!
i get replacement cones from Wheels Mfg
No returns on cones and bearings. So if you’ve not ordered from them before maybe work with your bike shop if you have a good relationship with them.
good luck!
Likes For mrv:
#5
Full Member
Join Date: Jul 2023
Location: "Driftless" WI
Posts: 401
Bikes: 1972 Motobecane Grand Record, 2022 Kona Dew+
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 167 Post(s)
Liked 152 Times
in
113 Posts
Yep, I see now. That cover's a press-fit on your cone nut, something I've not encountered before. Looks to be in OK shape for re-use though once you find a proper replacement cone.
You tried posting a tech support query on Kona's website yet? Or calling / stopping in at a couple of your LBS for their opinions?
You tried posting a tech support query on Kona's website yet? Or calling / stopping in at a couple of your LBS for their opinions?
Likes For spclark:
#6
Senior Member
Join Date: Jan 2009
Location: San Diego, CA
Posts: 3,714
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 857 Post(s)
Liked 1,090 Times
in
760 Posts
Check here. "wheel hub axle cones" - Modern Bike Might take awhile to scroll through all the choices and my search maybe could be a little more precise to eliminate all the non-cone parts. You may be able to find a part number to get from a local shop.
#7
I am potato.
Join Date: Jun 2015
Location: Pacific Northwest
Posts: 3,152
Bikes: Only precision built, custom high performance elitist machines of the highest caliber. 🍆
Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 1806 Post(s)
Liked 1,669 Times
in
956 Posts
The good news is the dust cover is usually just lightly pressed on and is easily removed by a properly sized socket and hand pressure on a table top. Now you are just looking for the appropriate cone.
Most bike shops have a shoebox full of miscellaneous cones. Bring the old one in to see if they'll let you paw through the box to find a match.
Most bike shops have a shoebox full of miscellaneous cones. Bring the old one in to see if they'll let you paw through the box to find a match.
Likes For base2:
Likes For mikkocase:
Likes For mikkocase:
#10
Senior Member
Join Date: Apr 2016
Posts: 1,360
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 545 Post(s)
Liked 478 Times
in
365 Posts
Hi, I've stripped and repacked cup and cone bearings before but never actually had to replace a cone, till now.
The cone is for the rear wheel non-drive side (disc brake side) of a Kona ***** Inc (circa 2011) in a XERO branded hub (model unknown). The cone here has been damaged.
The cone is for the rear wheel non-drive side (disc brake side) of a Kona ***** Inc (circa 2011) in a XERO branded hub (model unknown). The cone here has been damaged.
#12
Senior Member
Join Date: Jul 2005
Location: Boulder County, CO
Posts: 4,424
Bikes: '80 Masi Gran Criterium, '12 Trek Madone, early '60s Frejus track
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 521 Post(s)
Liked 455 Times
in
342 Posts
a
Yes. Measure and eyeball the contour of the race carefully. And if you're not sure of the thread pitch, order an axle and locknuts, too.
https://wheelsmfg.com/
i get replacement cones from Wheels Mfg
No returns on cones and bearings. So if you’ve not ordered from them before maybe work with your bike shop if you have a good relationship with them.
good luck!
i get replacement cones from Wheels Mfg
No returns on cones and bearings. So if you’ve not ordered from them before maybe work with your bike shop if you have a good relationship with them.
good luck!
#13
buy my bikes
Join Date: Jun 2014
Location: Michigan
Posts: 1,807
Bikes: my very own customized GUNNAR CrossHairs
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 521 Post(s)
Liked 438 Times
in
250 Posts
then i just replaced the cones front and rear: $60 !! and like $5 for balls from my LBS.
anyway.... i guess i really want those hubs!! ha!
#14
Senior Member
Join Date: Jul 2005
Location: Boulder County, CO
Posts: 4,424
Bikes: '80 Masi Gran Criterium, '12 Trek Madone, early '60s Frejus track
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 521 Post(s)
Liked 455 Times
in
342 Posts
I struggle with spending so much money on vintage wheels - as an example - I purchased a 27in wheelset so the hub width would match the frame. For $20 I got wheelset, skewers, tires, tubes, and a NOS freewheel. $20 plus chatting for 90 minutes with the seller....
then i just replaced the cones front and rear: $60 !! and like $5 for balls from my LBS.
anyway.... i guess i really want those hubs!! ha!
then i just replaced the cones front and rear: $60 !! and like $5 for balls from my LBS.
anyway.... i guess i really want those hubs!! ha!
#15
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 15,204
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6315 Post(s)
Liked 4,904 Times
in
3,379 Posts
Just find any cone that fits that axle. You can add or remove spacers as needed to get the OLD and wheel centered to the frame.
#16
Senior Member
Join Date: Feb 2015
Location: Mission Viejo
Posts: 5,839
Bikes: 1986 Cannondale SR400 (Flat bar commuter), 1988 Cannondale Criterium XTR, 1992 Serotta T-Max, 1995 Trek 970
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1954 Post(s)
Liked 2,199 Times
in
1,337 Posts
I had never heard of XERO. But a quick search turned up an old BF thread that said they are Formula.
https://www.bikeforums.net/road-cycl...ngs-parts.html
There are a couple of XERO rear hubs on eBay, that my work as donors. If not, go to an LBS and see is they have a similar Formula made hub or Formula cones that match yours.
John
https://www.bikeforums.net/road-cycl...ngs-parts.html
There are a couple of XERO rear hubs on eBay, that my work as donors. If not, go to an LBS and see is they have a similar Formula made hub or Formula cones that match yours.
John
#17
Senior Member
Join Date: Apr 2016
Posts: 1,360
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 545 Post(s)
Liked 478 Times
in
365 Posts
I struggle with spending so much money on vintage wheels - as an example - I purchased a 27in wheelset so the hub width would match the frame. For $20 I got wheelset, skewers, tires, tubes, and a NOS freewheel. $20 plus chatting for 90 minutes with the seller....
then i just replaced the cones front and rear: $60 !! and like $5 for balls from my LBS.
anyway.... i guess i really want those hubs!! ha!
then i just replaced the cones front and rear: $60 !! and like $5 for balls from my LBS.
anyway.... i guess i really want those hubs!! ha!
Likes For grumpus:
#18
Senior Member
To get by while you're trying to find a correct replacement (I can't stand being without my bike), part of an article I am writing about bearing adjustment (even sheldonbrown is missing some critical info):
Obviously, best if the cones (inner races) have no pits or spalling, but if it does and you're broke or time-challenged, you can get by, by marking with paint/nail-polish on the outer locknut periphery, the position of that spalling, and install the wheel on the bike with that mark on TOP, because it's the bottom of the cone that is taking most of the load. You'd be surprised how much difference that makes with a damaged cone. If it's rear axle and drive side, orient the spall position on top and slightly forward, as you're getting tension loads from the chain to the aft part of the cone.
Obviously, best if the cones (inner races) have no pits or spalling, but if it does and you're broke or time-challenged, you can get by, by marking with paint/nail-polish on the outer locknut periphery, the position of that spalling, and install the wheel on the bike with that mark on TOP, because it's the bottom of the cone that is taking most of the load. You'd be surprised how much difference that makes with a damaged cone. If it's rear axle and drive side, orient the spall position on top and slightly forward, as you're getting tension loads from the chain to the aft part of the cone.
#20
Senior Member
Join Date: Apr 2016
Posts: 1,360
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 545 Post(s)
Liked 478 Times
in
365 Posts
part of an article I am writing about bearing adjustment (even sheldonbrown is missing some critical info):
Obviously, best if the cones (inner races) have no pits or spalling, but if it does and you're broke or time-challenged, you can get by, by marking with paint/nail-polish on the outer locknut periphery, the position of that spalling, and install the wheel on the bike with that mark on TOP, because it's the bottom of the cone that is taking most of the load. You'd be surprised how much difference that makes with a damaged cone. If it's rear axle and drive side, orient the spall position on top and slightly forward, as you're getting tension loads from the chain to the aft part of the cone.
Obviously, best if the cones (inner races) have no pits or spalling, but if it does and you're broke or time-challenged, you can get by, by marking with paint/nail-polish on the outer locknut periphery, the position of that spalling, and install the wheel on the bike with that mark on TOP, because it's the bottom of the cone that is taking most of the load. You'd be surprised how much difference that makes with a damaged cone. If it's rear axle and drive side, orient the spall position on top and slightly forward, as you're getting tension loads from the chain to the aft part of the cone.
Likes For grumpus:
#21
Senior Member
Exactly. I think in this case, the term would be "clocked", and not timed. Proven on current bike, noticeable difference. Didn't know about the cone spalling until regreasing hubs, discovered, marked and positioned as noted, could feel the improvement in smoothness. I've had it that way for a couple years now, probably 10,000+ miles. I should buy new cones, but it's working for now, and I'm guessing to swap out the wheels this year due to sidewall wear. Note, the spalling may have been caused by my previous wheel bearing adjustments, I used to always leave the tiniest bit of slack in the adjustment. I now know this to be wrong, slack means radial load goes into 2 or 3 bearing balls on each side. No slack, and very slight preload, means load goes into about 180 degrees, or half of the bearing balls, on each side. Vastly improved durability. I did a deep dive on bearing theory.
#22
Senior Member
Bike singular? There's a simple solution to that.
That's an interesting idea, I may try it. I get more use from a worn hub simply by taking care with bearing adjustment: just set it so it feels OK in the less worn parts and a bit loose in the worse parts, it will run with the occasional clunk but remain serviceable while you're sorting a new wheel (this is probably best avoided in the case of a traditional freewheel rear hub, as those axles tend to break). If you try to adjust out all the movement the bearing will soon fail, possibly catastrophically and miles from home.
That's an interesting idea, I may try it. I get more use from a worn hub simply by taking care with bearing adjustment: just set it so it feels OK in the less worn parts and a bit loose in the worse parts, it will run with the occasional clunk but remain serviceable while you're sorting a new wheel (this is probably best avoided in the case of a traditional freewheel rear hub, as those axles tend to break). If you try to adjust out all the movement the bearing will soon fail, possibly catastrophically and miles from home.
#24
Full Member
Join Date: Jul 2023
Location: "Driftless" WI
Posts: 401
Bikes: 1972 Motobecane Grand Record, 2022 Kona Dew+
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 167 Post(s)
Liked 152 Times
in
113 Posts
But the practice has merit, I agree 100%! And as for preloading bearings, yes they need to be snug in their races so as to limit any side-to-side deflection that just pounds (peens) races to bits. Even tapered roller bearings need to be snug; leaving any dimension for movement is tantamount to a disaster in waiting.
#25
Senior Member
Riiiiggghhhhttttt... so tell me how you tell time w/o a clock of some kind? Potato, potahto.
But the practice has merit, I agree 100%! And as for preloading bearings, yes they need to be snug in their races so as to limit any side-to-side deflection that just pounds (peens) races to bits. Even tapered roller bearings need to be snug; leaving any dimension for movement is tantamount to a disaster in waiting.
But the practice has merit, I agree 100%! And as for preloading bearings, yes they need to be snug in their races so as to limit any side-to-side deflection that just pounds (peens) races to bits. Even tapered roller bearings need to be snug; leaving any dimension for movement is tantamount to a disaster in waiting.
The qualifier to the above is headset ball bearings, where if you adjusted it the slightest bit tight, it instantly brinelled (dented) the headset races, and you had lumpy steering. This was very easy to do with headset nuts. Newer designs that clamp the stem around the steering tube are much more foolproof; Push down while tightening the stem clamp. Some use a star nut to pull down on the stem, but it's a small screw, not large nut requiring a big wrench and too much leverage.
I usually associate "timing" with dynamic machines, and "clocking" for stationary positions. But definitely not worth arguing about.