What to adjust when dropping stem height?
#1
Senior Member
Thread Starter
Join Date: Sep 2014
Posts: 430
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 93 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
What to adjust when dropping stem height?
I've been riding for 1 year now and I have a Specialized Secteur with the more relaxed geometry, however as I advanced I want to remove one of the spacers and drop the stem height by about 1/4 inch or more. When I do this what else would I hypothetically need to adjust in order to maximize my bike fit?
#2
Senior Member
Join Date: May 2014
Location: The Continental Divide
Posts: 113
Bikes: CDALE CAAD10
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Lots of factors will go into this. What are your goals? Why do you want to be in a more aggressive position? Do you have the fitness required to adopt the new position? Do you have the flexibility requisite to make the change? You will only become faster in a more aggressive position if you can hold the position in a relaxed manner. I have seen lots of riders adopt an aggressive position just to look aggressive, but lack the physical fitness necessary to hold the position and end up sitting up a lot because they are sore, or they have a lot of pressure on their hands because their core strength is not on target, and all other sorts of energy wasters. I suspect that many are slower with the more aggressive position because they are less comfortable. In the majority of cases...Comfort = speed.
In the event you do go forward with your adjustments...do not touch your saddle. Your saddle's height or fore/aft should NOT ever move in relation to an adjusted stem.
Word to yer mama.
In the event you do go forward with your adjustments...do not touch your saddle. Your saddle's height or fore/aft should NOT ever move in relation to an adjusted stem.
Word to yer mama.