Sram guide r pads SQUEAKING no matter what
#1
Newbie
Thread Starter
Join Date: Jul 2020
Posts: 3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Sram guide r pads SQUEAKING no matter what
I recently bought a new sram guide r front brake and rotor and i bedded the pads in and went for i ride i then washed the bike the day after and thought it would be good to wipe down the rotor with some rubbing alcohol and since then the pads have done nothing but squeak i have light them up with a blow torch but still nothing so i sanded them I have done absolutely everything the only thing that works is jamming them with mud and this keeps them from squeaking but then after a few hours back to squeaking until i jam more dirt into them any help that isnt buying new pads as they are basically brand new
#2
Senior Member
I recently bought a new sram guide r front brake and rotor and i bedded the pads in and went for i ride i then washed the bike the day after and thought it would be good to wipe down the rotor with some rubbing alcohol and since then the pads have done nothing but squeak i have light them up with a blow torch but still nothing so i sanded them I have done absolutely everything the only thing that works is jamming them with mud and this keeps them from squeaking but then after a few hours back to squeaking until i jam more dirt into them any help that isnt buying new pads as they are basically brand new
If nothing works, you'll have to replace pads.
BTW, where did you came with the idea of jamming the pads with mud? Don't do that.
#3
Newbie
Thread Starter
Join Date: Jul 2020
Posts: 3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
i was reading up online i a few people where saying if nothing works try mud as for them that has fixed all of there contamination problems is there nothing else i can do accept replace the pads?
#4
Senior Member
If you try that keep in mind that until the degreaser is burnt off, it's going to squeal and braking power will be very low.
In any case, unless you're a cheapskate like me, it's probably not worth it. Pads from discobrakes, which is the brand I usually use, cost 7€ each pair.
#5
Newbie
Thread Starter
Join Date: Jul 2020
Posts: 3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I've had success cleaning the pads with soapy water, applying degreaser after that and doing some downhill high speed stops until it recovers normal braking power. Try to drag the brake as long as you can. The idea is to heat up the brake enough to burn everything thats on the pads.
If you try that keep in mind that until the degreaser is burnt off, it's going to squeal and braking power will be very low.
In any case, unless you're a cheapskate like me, it's probably not worth it. Pads from discobrakes, which is the brand I usually use, cost 7€ each pair.
If you try that keep in mind that until the degreaser is burnt off, it's going to squeal and braking power will be very low.
In any case, unless you're a cheapskate like me, it's probably not worth it. Pads from discobrakes, which is the brand I usually use, cost 7€ each pair.
#6
Senior Member
I wouldn't worry too much if the squeaking is occasional. My brakes squeal like a furious pig if they're wet. No need for rain... sometimes passing through a wet section of road or a small puddle is enough.