ISO and For Trade thread parts 2 and 3.
#8351
Senior Member
Join Date: Dec 2011
Location: Columbia, SC
Posts: 233
Bikes: 2006 Diamondback Century
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Have:
Avid 15C Center-Pull Cantilevers w/Kool-Stop Pads (Still have some life)
Threadless Stem Adapter for 1 1/8" Threaded Fork - Unused w/Marks from Storage
Kool-Stop Salmon Cartridge Pads - NIB - 2 Packs (4 Pads)
GripShift 7x3 Indexed Shifters - Used
(GONE) Eleven81 Riser Stem (Would guess around ~80-90mm, See pic)
(SPOKEN FOR) Shimano HG50 Chain - NIB
Want:
Pretty open... Frame bag, rear rack, Camelbak Bottles, 700x23/25 tires, etc... If you have something you think I may be able to use, make an offer.
Avid 15C Center-Pull Cantilevers w/Kool-Stop Pads (Still have some life)
Threadless Stem Adapter for 1 1/8" Threaded Fork - Unused w/Marks from Storage
Kool-Stop Salmon Cartridge Pads - NIB - 2 Packs (4 Pads)
GripShift 7x3 Indexed Shifters - Used
(GONE) Eleven81 Riser Stem (Would guess around ~80-90mm, See pic)
(SPOKEN FOR) Shimano HG50 Chain - NIB
Want:
Pretty open... Frame bag, rear rack, Camelbak Bottles, 700x23/25 tires, etc... If you have something you think I may be able to use, make an offer.
Last edited by nrowensby; 05-02-12 at 04:17 PM.
#8352
Wrench Savant
- Sugino Mighty Tour LH crankarm in 171mm length.
#8353
multimodal commuter
Join Date: Nov 2006
Location: NJ, NYC, LI
Posts: 19,808
Bikes: 1940s Fothergill, 1959 Allegro Special, 1963? Claud Butler Olympic Sprint, Lambert 'Clubman', 1974 Fuji "the Ace", 1976 Holdsworth 650b conversion rando bike, 1983 Trek 720 tourer, 1984 Counterpoint Opus II, 1993 Basso Gap, 2010 Downtube 8h, and...
Mentioned: 584 Post(s)
Tagged: 0 Thread(s)
Quoted: 1908 Post(s)
Liked 574 Times
in
339 Posts
What is it with left side crank arms, anyway? Do people bugger the pedal threads or something?
#8354
Steel is real, baby!
Still ISO a few Superbe Pro parts:
BB for a double crank (english threads)
170mm Crank
Aero Brake Levers
Looking for decent condition (NOT NOS, etc.) parts. Resonable pricing.
BB for a double crank (english threads)
170mm Crank
Aero Brake Levers
Looking for decent condition (NOT NOS, etc.) parts. Resonable pricing.
Last edited by frpax; 04-17-12 at 01:02 PM. Reason: BB specification
#8355
自転車整備士
Join Date: Apr 2012
Location: Denver, Colorado USA
Posts: 885
Bikes: '86 Moots Mountaineer, '94 Salsa Ala Carte, '94 S-Works FSR, 1983 Trek 600 & 620
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
Yes, that's the ones. That is, they have the little S-crown logo-thingy on the outside, near the center, and "Mighty Tour" on the inside. Oldskoolwrench wants a 6 3/4" one, and I want a 6 1/2" one. I'd be happy with a Mighty Tour or Might road or track, makes no difference on the left side. I'll even trade a 175 mm Campy NR.
What is it with left side crank arms, anyway? Do people bugger the pedal threads or something?
What is it with left side crank arms, anyway? Do people bugger the pedal threads or something?
my Mighty Tour LH crank with a KKT Pro Vic quill pedal attached to it, just like the RH side!!
I... CAN'T.... FIND IT!!
lol
Alan
#8356
multimodal commuter
Join Date: Nov 2006
Location: NJ, NYC, LI
Posts: 19,808
Bikes: 1940s Fothergill, 1959 Allegro Special, 1963? Claud Butler Olympic Sprint, Lambert 'Clubman', 1974 Fuji "the Ace", 1976 Holdsworth 650b conversion rando bike, 1983 Trek 720 tourer, 1984 Counterpoint Opus II, 1993 Basso Gap, 2010 Downtube 8h, and...
Mentioned: 584 Post(s)
Tagged: 0 Thread(s)
Quoted: 1908 Post(s)
Liked 574 Times
in
339 Posts
Thousands of years from now, the archaeologists digging up the remains of my house and garage will probably find, in all of the junk and debris,
my Mighty Tour LH crank with a KKT Pro Vic quill pedal attached to it, just like the RH side!!
I... CAN'T.... FIND IT!!
lol
Alan
my Mighty Tour LH crank with a KKT Pro Vic quill pedal attached to it, just like the RH side!!
I... CAN'T.... FIND IT!!
lol
Alan
#8357
kdboxerdog
Join Date: Feb 2005
Location: Coeur d' Alene
Posts: 55
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
ISO: Cook Bros, Kooka, XTR, XT mountain triple crankset (and BB if you have it) for a Bontrager Race lite project. Crank arm length about a 175, but I know some of those companies used different length standards.
Disc wheelset 26"
Have :
7 speed lx hubs (black) laced to Mavic M400 silver rims with Panaracer Smoke and Dart tires. All are lightly used in good condition. Tires are not rotting, but are obviously not as supple as they used to be.
Nitto moustache bars in 25.4 clamp
Sakae sx 170 length, with 46/36 rings and un72 crankset
Chris King 1 1/8 threadless headset in green
Shimano 8 speed bar end shifters
1" threaded steerer Quadra 21r with a black crown, off a Bontrager Privateer
Disc wheelset 26"
Have :
7 speed lx hubs (black) laced to Mavic M400 silver rims with Panaracer Smoke and Dart tires. All are lightly used in good condition. Tires are not rotting, but are obviously not as supple as they used to be.
Nitto moustache bars in 25.4 clamp
Sakae sx 170 length, with 46/36 rings and un72 crankset
Chris King 1 1/8 threadless headset in green
Shimano 8 speed bar end shifters
1" threaded steerer Quadra 21r with a black crown, off a Bontrager Privateer
Last edited by kdboxerdog; 04-17-12 at 02:03 PM. Reason: Add detail
#8358
Wookie Jesus inspires me.
Join Date: Mar 2011
Location: Seattle, WA
Posts: 2,215
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
ISO: 1" 700C threadless carbon fork that can fit a 650B x 38mm tire OR a super long lugged threaded steel fork that came off a 60cm sport tourer (so I can run threadless).
Last edited by Puget Pounder; 04-18-12 at 10:48 AM.
#8361
Senior Member
Join Date: Nov 2005
Posts: 5,768
Bikes: Cinelli, Paramount, Raleigh, Carlton, Zeus, Gemniani, Frejus, Legnano, Pinarello, Falcon
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 12 Post(s)
Likes: 0
Liked 8 Times
in
8 Posts
I need a long arm Universal sidepull caliper labeled "Universal Extra" for the rear on an old Girardengo.
Lots of vintage European for trade.
Lots of vintage European for trade.
#8362
Senior Member
I am looking for old racing numbers that would have hung from a braze-on underneath the top tube. Does anyone have these or know where I can find some? In old photos they look like they would have been made from plastic or maybe laminated paper.
#8363
Member
Join Date: Apr 2012
Location: Upstate South Carolina
Posts: 22
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
In search of the nuts/bolts to rebuild brakes like these (actually 1987 Campy Athena group brakes). I'm so new, I don't even know what to ask for. If you don't have it, what are the chances you could tell me where you think they might be found. And remember, we were all newbies once. :-)
Bill
Bill
#8364
Senior Member
ISO. a fork for an early to mid 70's Mondia Special. has a Nervex looking crown, Campagnolo drop outs and would be Reynolds 531 tubing... 7 3/8" of steer tube would be perfect, but needs to be at least that much
Have. well no forks to trade but plenty of other stuff, components etc
Have. well no forks to trade but plenty of other stuff, components etc
#8365
Cat 6
Join Date: Dec 2007
Location: Mountain Brook, AL
Posts: 7,482
Mentioned: 27 Post(s)
Tagged: 0 Thread(s)
Quoted: 500 Post(s)
Liked 183 Times
in
118 Posts
Not C&V, and a longshot in any case, but I
Have: Campagnolo Record 2008 QS FD, for 10/9s double & CT, BNIB, 32mm clamp
Need: same in 35mm clamp.
I just bought this on clearance at an LBS, and it ended up the box was mislabled. They would refund me, but I can't get a 35mm at the same price. So I'm trying it out here.
Have: Campagnolo Record 2008 QS FD, for 10/9s double & CT, BNIB, 32mm clamp
Need: same in 35mm clamp.
I just bought this on clearance at an LBS, and it ended up the box was mislabled. They would refund me, but I can't get a 35mm at the same price. So I'm trying it out here.
__________________
72 Frejus (for sale), Holdsworth Record (for sale), special CNC & Gitane Interclub / 74 Italvega NR (for sale) / c80 French / 82 Raleigh Intl MkII f&f (for sale)/ 83 Trek 620 (for sale)/ 84 Bruce Gordon Chinook (for sale)/ 85 Ron Cooper / 87 Centurion IM MV (for sale) / 03 Casati Dardo / 08 BF IRO / 09 Dogma FPX / 09 Giant TCX0 / 10 Vassago Fisticuff
72 Frejus (for sale), Holdsworth Record (for sale), special CNC & Gitane Interclub / 74 Italvega NR (for sale) / c80 French / 82 Raleigh Intl MkII f&f (for sale)/ 83 Trek 620 (for sale)/ 84 Bruce Gordon Chinook (for sale)/ 85 Ron Cooper / 87 Centurion IM MV (for sale) / 03 Casati Dardo / 08 BF IRO / 09 Dogma FPX / 09 Giant TCX0 / 10 Vassago Fisticuff
#8367
Fahrrad Mama
Was someone looking for a Univega touring frame in 58 that was canti-friendly? I could have sworn so. Anyway, I saw one (allegedly- no decals) locally. Don't know a thing about it, but I thought I'd throw it out there.
#8368
Newbie
Join Date: Apr 2012
Posts: 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
In Search Of:
Rear Weinmann 610/999 Caliper Brake. I'd like for it match the one in this photo:
(red label and plastic components).
The ones currently on ebay don't match my criteria or are too expensive. I suppose a front brake will work too, as I have the rear mounting bolt.
Rear Weinmann 610/999 Caliper Brake. I'd like for it match the one in this photo:
(red label and plastic components).
The ones currently on ebay don't match my criteria or are too expensive. I suppose a front brake will work too, as I have the rear mounting bolt.
#8369
Full Member
Join Date: Jul 2010
Location: San Antonio, Texas
Posts: 467
Bikes: 84 Coppi - 94 Hujsak - 82 Colnago Superissimo - 78 Ciöcc - 70's Galmozzi - 73 Lambert - 78 Motobecane Grand Record - 87 Peugeot Triathlon - 66 Peugeot H-40 - 78 Peugeot U08 - 85 Raleigh C-40 - 82 miyata 310 - 82 Univega - 85 Sterling SIS Mixte
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 39 Post(s)
Liked 42 Times
in
14 Posts
ISO
Dura Ace, Double, Fd-7700, Front Derailleur, 28.6mm clamp - not scuffed nice cage
HAVE
Dura Ace, Double, Fd-7700, Front Derailleur, 31.8mm clamp - not scuffed nice cage
Shimano 600 brake calipers
Shimano 600 leavers - no hoods
Dura Ace, Double, Fd-7700, Front Derailleur, 28.6mm clamp - not scuffed nice cage
HAVE
Dura Ace, Double, Fd-7700, Front Derailleur, 31.8mm clamp - not scuffed nice cage
Shimano 600 brake calipers
Shimano 600 leavers - no hoods
100mm 3TTT 1 Inch Road Bike Quill Stem 25.6mm silver
glad to send pix
glad to send pix
#8370
Senior Member
Iso. Campagnolo pista/track pedals, preferably chrome cages, but would go for later black cage version
Have. Campagnolo Record pedals in excellent condition, early NR type with chrome cages and later SR type with black cages. And plenty more stuff
Have. Campagnolo Record pedals in excellent condition, early NR type with chrome cages and later SR type with black cages. And plenty more stuff
#8371
multimodal commuter
Join Date: Nov 2006
Location: NJ, NYC, LI
Posts: 19,808
Bikes: 1940s Fothergill, 1959 Allegro Special, 1963? Claud Butler Olympic Sprint, Lambert 'Clubman', 1974 Fuji "the Ace", 1976 Holdsworth 650b conversion rando bike, 1983 Trek 720 tourer, 1984 Counterpoint Opus II, 1993 Basso Gap, 2010 Downtube 8h, and...
Mentioned: 584 Post(s)
Tagged: 0 Thread(s)
Quoted: 1908 Post(s)
Liked 574 Times
in
339 Posts
I'm looking for a three speed freewheel. Alternately I'd be interested in a four speed freewheel.
#8373
Central NJ
Join Date: Mar 2012
Location: New Jersey
Posts: 62
Bikes: Cannondale CAAD5 R3000si, Mongoose Crossway 450, Azuki Imperial
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Suntour Cogs
ISO: Suntour Pro-Compe compatible cogs
I just acquired an old Azuki Imperial, with a Suntour Pro-Compe freewheel with 14-28 cogs. Without breaking the bank, I want to find some cogs a bit smaller and larger; perhaps a 13T and a 30T. I think either Winner or Perfect cogs may work.
I just acquired an old Azuki Imperial, with a Suntour Pro-Compe freewheel with 14-28 cogs. Without breaking the bank, I want to find some cogs a bit smaller and larger; perhaps a 13T and a 30T. I think either Winner or Perfect cogs may work.
#8374
Senior Member
Join Date: Feb 2012
Location: Chicagoland
Posts: 1,895
Bikes: to many to list
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 296 Post(s)
Liked 1,064 Times
in
262 Posts
I really want to buy a Raleigh International. Must be in good shape. Preferably a gold one from 73 or 74. Good shape 23 1/2 to 24 in tall.
__________________
From Illinois. Collector of many fine bicycles from all over the world. Subscribe to my Youtube channel. Just search John's vintage road bike garage
From Illinois. Collector of many fine bicycles from all over the world. Subscribe to my Youtube channel. Just search John's vintage road bike garage
#8375
Senior Member
Join Date: Aug 2010
Location: Scottsdale, AZ
Posts: 159
Bikes: 3Rensho Super Record Export, Zunow Z-1, Andy Gilmour Breakaway, Sycip 26er
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
ISO: Campy Record Rear clincher Wheel, LF Hub. with MA40 rim if at all possible. Doesn't have to be in great condition, just rideable.