Cost-effective chain lube
#1
Senior Member
Thread Starter
Join Date: Apr 2005
Location: Ann Arbor, MI
Posts: 16,897
Bikes: 1980 Masi, 1984 Mondonico, 1984 Trek 610, 1980 Woodrup Giro, 2005 Mondonico Futura Leggera ELOS, 1967 PX10E, 1971 Peugeot UO-8
Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 1867 Post(s)
Liked 666 Times
in
508 Posts
Cost-effective chain lube
suggestions? Need to recommend one to a friend - good rider, not a mechanic.
#2
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 15,150
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6287 Post(s)
Liked 4,877 Times
in
3,361 Posts
Cost effective? Even the overpriced bottle of lube I bought at the bike shop has lasted 2 years and probably will last another year. So cost of lube really isn't an issue. Just use something.
Likes For Iride01:
#3
Senior Member
Join Date: Dec 2010
Location: northern Deep South
Posts: 8,946
Bikes: Fuji Touring, Novara Randonee
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 2623 Post(s)
Liked 1,964 Times
in
1,230 Posts
Got an oil can and a half-used bottle of 10W30?
Likes For pdlamb:
#4
Senior Member
Join Date: Jun 2005
Location: Kentucky
Posts: 2,610
Bikes: 06 Lemond Reno, 98 GT Timberline mtn.bike
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 427 Post(s)
Liked 705 Times
in
439 Posts
There are all kinds of lube, some for dry conditions, some for wet conditions, some that you may want to wipe down and re-apply more often, some which may not need that. Your friend will want to consider where he rides, and in what conditions. The important thing is to keep the chain lubed, if it gets gritty then clean and re-lube. Just don't let it get "dry" and cause wear on components. If doesn't want to pay the price for pre-made lube, I'm sure google has many DIY "recipes" for homemande lube.
Likes For freeranger:
#5
Senior Member
Thread Starter
Join Date: Apr 2005
Location: Ann Arbor, MI
Posts: 16,897
Bikes: 1980 Masi, 1984 Mondonico, 1984 Trek 610, 1980 Woodrup Giro, 2005 Mondonico Futura Leggera ELOS, 1967 PX10E, 1971 Peugeot UO-8
Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 1867 Post(s)
Liked 666 Times
in
508 Posts
Ok, I'm gonna tell her to buy ProLink at REI.
#6
Senior Member
Join Date: Mar 2012
Posts: 991
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 511 Post(s)
Likes: 0
Liked 646 Times
in
362 Posts
Home brew ProLink: oil of your choice (lots of people use motor oil) diluted in three parts odorless mineral spirits. Lube the chain liberally and then wipe off all the excess. Solvent evaporates leaving the lube where you want it. Been using this for hundreds of thousands of miles with great success.
Likes For KerryIrons:
Likes For icemilkcoffee:
Likes For Atlas Shrugged:
#10
Insane Bicycle Mechanic
Join Date: Mar 2008
Location: other Vancouver
Posts: 9,863
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 813 Post(s)
Liked 732 Times
in
390 Posts
There are all kinds of lube, some for dry conditions, some for wet conditions, some that you may want to wipe down and re-apply more often, some which may not need that. Your friend will want to consider where he rides, and in what conditions. The important thing is to keep the chain lubed, if it gets gritty then clean and re-lube. Just don't let it get "dry" and cause wear on components. If doesn't want to pay the price for pre-made lube, I'm sure google has many DIY "recipes" for homemande lube.
__________________
Jeff Wills
Comcast nuked my web page. It will return soon..
Jeff Wills
Comcast nuked my web page. It will return soon..
#11
Super-duper Genius
Join Date: Aug 2016
Location: Muskrat Springs, Utah
Posts: 1,713
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 768 Post(s)
Liked 984 Times
in
508 Posts
My favorite lube happens to be Boeshield T-9. It looks pretty expensive at ten bucks for a little bottle. But that bottle will last me two or three years. And I'm not stingy. I like lubing my chains, so I do it about every 200 miles. To me, one or two tenths of a penny per mile ridden seems reasonable.
#13
Senior Member
Join Date: Sep 2020
Location: SE Wyoming
Posts: 604
Bikes: 1995 Specialized Rockhopper,1989 Specialized Rock Combo, 2013 Specialized Tarmac Elite
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 213 Post(s)
Liked 588 Times
in
278 Posts
I like Dumonde Tech Classic Lite for dry conditions in my area.
#14
Senior Member
Join Date: May 2008
Location: Zang's Spur, CO
Posts: 9,087
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 3397 Post(s)
Liked 5,582 Times
in
2,896 Posts
Likes For Shimagnolo:
#16
Senior Member
Relevant to the context of this thread.
Is the goal to have a low-cost lubricant, or for the lubricant to minimize the cost of riding a bike? Lubricants are fairly inexpensive, but decent metal drivetrain parts can cost quite a bit, so a lubricant that produces good component longevity might be more cost-effective to use even if it's relatively "pricey". So for instance, Silca's Synergetic is a very expensive wet lube at ~$25 per 2oz, but in independent testing it's performed extremely well in wear rate tests compared with most other wet lubes.
Is the goal to have a low-cost lubricant, or for the lubricant to minimize the cost of riding a bike? Lubricants are fairly inexpensive, but decent metal drivetrain parts can cost quite a bit, so a lubricant that produces good component longevity might be more cost-effective to use even if it's relatively "pricey". So for instance, Silca's Synergetic is a very expensive wet lube at ~$25 per 2oz, but in independent testing it's performed extremely well in wear rate tests compared with most other wet lubes.
Likes For HTupolev:
#17
Senior Member
Join Date: May 2010
Location: Bastrop Texas
Posts: 4,529
Bikes: Univega, Peu P6, Peu PR-10, Ted Williams, Peu UO-8, Peu UO-18 Mixte, Peu Dolomites
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 992 Post(s)
Liked 1,657 Times
in
1,063 Posts
Automatic Transmission Fluid - ATF
I use ATF as a Luber and a Cleaner of my chains. I use a little squirt bottle to apply a liberal amount then run the chain through a heavy cloth to get off oil and crud. I do this often as the dusty roads I ride dirty the chains quickly. The other advantages are ATF is cheap, penetrates well, is usually rubber friendly, does not stink, and has many other uses in the household. If I need more lubrication I just use a little 10W-30 as a chaser.I have, over the years, come to consider bicycle chains a disposable item. I clean um, lube um, use um, and think nothing of changing um out for new when they get worn. Same way with the new tires, tubes and maybe even freewheels.
(Except my old Regina 14-26. Now a worn Wall Hanger that gets taken down and used as a Figit tool. The sound of it bringing calming memories...)
__________________
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
Likes For zandoval:
#18
Senior Member
Join Date: Sep 2009
Posts: 1,973
Bikes: Habanero Titanium Team Nuevo
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 399 Post(s)
Liked 187 Times
in
123 Posts
#19
Senior Member
Join Date: Sep 2004
Location: Chicago area
Posts: 2,566
Bikes: Airborne "Carpe Diem", Motobecane "Mirage", Trek 6000, Strida 2, Dahon "Helios XL", Dahon "Mu XL", Tern "Verge S11i"
Mentioned: 23 Post(s)
Tagged: 0 Thread(s)
Quoted: 984 Post(s)
Liked 589 Times
in
404 Posts
Hi, Ken!
I've used ProLink for years, and I think I've only ever used one bottle.
My only objection is that it's very runny, and it takes a little concentration to dispense only one drop to each chain link. Not really a big deal.
Chain life is good, and the chain stays fairly clean.
Cheers,
Steve
I've used ProLink for years, and I think I've only ever used one bottle.
My only objection is that it's very runny, and it takes a little concentration to dispense only one drop to each chain link. Not really a big deal.
Chain life is good, and the chain stays fairly clean.
Cheers,
Steve
#20
Junior Member
Home Depot:
https://www.homedepot.com/p/Blaster-...-CCL/205851095
Squirt a little on the chain and kick it back a few time every other ride.
Squirt a little on your garage door opener rails and bearings for a smoother open
https://www.homedepot.com/p/Blaster-...-CCL/205851095
Squirt a little on the chain and kick it back a few time every other ride.
Squirt a little on your garage door opener rails and bearings for a smoother open
#22
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,633
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3871 Post(s)
Liked 2,572 Times
in
1,579 Posts
Is there a mainstream chain lube that *isn't* reasonably cost-effective when used properly? People will fixate on the smallest things...
Likes For ThermionicScott:
#24
Senior Member
Join Date: Dec 2020
Location: Wake Forest, NC
Posts: 5,888
Bikes: 1989 Cinelli Supercorsa
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 3571 Post(s)
Liked 2,995 Times
in
1,812 Posts
I recommend canola, but olive can add a touch of floral aroma with a nice peppery bite.
#25
Full Member
Tri-Flow when I started cycling back in 1985ish. Being lazy about cleaning my bike, I switched to Rock N Roll Gold in Oct 2016. Now wax since 2020 (completely) when I started doing more indoor training. Don't you have a default? It can't be that expansive. The Rock N Roll Gold 16 oz w/4 oz bottle I bought lasted me over three years (>20k miles & still have some in the garage after switching to wax). It only cost $23.20 on Amazon today. It's that cheapest thing for my bikes!
How cheap is the friend?
How cheap is the friend?