Most/Least Liked Wrenching Tasks
#51
Senior Member
Join Date: Apr 2019
Location: oregon coast
Posts: 235
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 76 Post(s)
Liked 76 Times
in
44 Posts
For the other procrastinators out there (I am perhaps a charter member in the club), I offer this recent article from the NY Times:
Why You Procrastinate (It Has Nothing to Do With Self-Control)
Why You Procrastinate (It Has Nothing to Do With Self-Control)
#52
Extraordinary Magnitude
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,646
Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT
Mentioned: 84 Post(s)
Tagged: 0 Thread(s)
Quoted: 2608 Post(s)
Liked 1,699 Times
in
935 Posts
Oh I'm smoking ass pissed the eff off right now... trying to thread a brake cable through a cable yoke- and it started unstranding the cable- I didn't solder the end enough, or high enough up...
Untitled by Dave The Golden Boy, on Flickr
Untitled by Dave The Golden Boy, on Flickr
__________________
*Recipient of the 2006 Time Magazine "Person Of The Year" Award*
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
#53
Senior Member
Join Date: Jul 2017
Location: Queens, NY for now...
Posts: 1,515
Bikes: 82 Lotus Unique, 86 Lotus Legend, 88 Basso Loto, 88 Basso PR, 89 Basso PR, 96 Bianchi CDI, 2013 Deda Aegis, 2019 Basso Diamante SV
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 943 Post(s)
Liked 172 Times
in
113 Posts
I've always enjoyed working on my bikes as much as I do riding them (and sometimes I even get annoyed when everything is working right and properly maintained, because there is nothing to do).
And I'm also on the side of those that enjoy wrapping bars: instant gratification when you are finished, and few things in the world are as nice as fresh bar tape.
And I'm also on the side of those that enjoy wrapping bars: instant gratification when you are finished, and few things in the world are as nice as fresh bar tape.
Likes For robertorolfo:
#54
Senior Member
Join Date: May 2011
Location: Seattle WA
Posts: 2,841
Bikes: 2009 Handsome Devil, 1987 Trek 520 Cirrus, 1978 Motobecane Grand Touring, 1987 Nishiki Cresta GT, 1989 Specialized Allez Former bikes; 1986 Miyata Trail Runner, 1979 Miyata 912, 2011 VO Rando, 1999 Cannondale R800, 1986 Schwinn Passage
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 796 Post(s)
Liked 522 Times
in
367 Posts
Likes For ryansu:
#55
Zip tie Karen
Join Date: Aug 2009
Location: Fair Oaks Ranch, TX
Posts: 7,004
Bikes: '13 Motobecane Fantom29 HT, '16 Motobecane Turino Pro Disc, '18 Velobuild VB-R-022, '21 Tsunami SNM-100
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1465 Post(s)
Liked 1,542 Times
in
806 Posts
hate:
- stripping the paint from a frame prior to refinishing
- having to re-adjust a loose ball bottom bracket bearing after the first long test ride and the bearings settle in just a bit
- identifying the source of a click or tick while riding
- living with poor bearings and internals of Sunrace freewheels
- squeaky saddle rails
- getting STI triples/fronts to work correctly
like:
- polishing a frame and touching up prior to re-assembly
- polishing and re-assembling aluminum brake calipers
- discovering that all of my measuring, planning, and adjusting has resulted in a perfect fit on the first ride
- stripping the paint from a frame prior to refinishing
- having to re-adjust a loose ball bottom bracket bearing after the first long test ride and the bearings settle in just a bit
- identifying the source of a click or tick while riding
- living with poor bearings and internals of Sunrace freewheels
- squeaky saddle rails
- getting STI triples/fronts to work correctly
like:
- polishing a frame and touching up prior to re-assembly
- polishing and re-assembling aluminum brake calipers
- discovering that all of my measuring, planning, and adjusting has resulted in a perfect fit on the first ride
#56
I never finish anyth
Join Date: Jul 2010
Location: Western KY
Posts: 1,114
Bikes: 2008 Merckx LXM, 2003 Giant XTC mtb, 2001 Lemond Alpe d'Huez, 1997 Lemond Zurich, 1989 Cannondale ST, 1988 Masi Nuovo Strada, 1983 Pinarello Turismo
Mentioned: 63 Post(s)
Tagged: 0 Thread(s)
Quoted: 294 Post(s)
Liked 137 Times
in
86 Posts
Really Dislike:
1. removing powdercoat so the frame can be painted
Dislike:
1. removing a stuck stem/seatpost
2. trying to replicate saddle position - I never seem to get it right the first time
3. realizing that the BB spindle length still isn't right, with the second BB
4. losing one of the thin nuts for Campy NR brake pad holders
5. cutting the rear brake housing too short, for the second time
Like:
1. cleaning a dirty frame
2. polishing the paint on a used frame and seeing the real story unfold
3. servicing headset/BB/hub bearings and hearing the almost silent whoosh of a properly lubed and adjusted bearing
4. finding the right color for cable housings
5. wrapping bar tape
6. getting the shifter housing length just right so the loops touch in front of the headtube
7. building wheels
Really Like:
1. the first ride of a newly built bike - spokes flashing in the sun as the wheels turn
2. a 15mph tailwind on the last leg of a long ride
3. riding a freshly serviced 35 year old bike on a metric century and having zero issues
4. riding with good friends
1. removing powdercoat so the frame can be painted
Dislike:
1. removing a stuck stem/seatpost
2. trying to replicate saddle position - I never seem to get it right the first time
3. realizing that the BB spindle length still isn't right, with the second BB
4. losing one of the thin nuts for Campy NR brake pad holders
5. cutting the rear brake housing too short, for the second time
Like:
1. cleaning a dirty frame
2. polishing the paint on a used frame and seeing the real story unfold
3. servicing headset/BB/hub bearings and hearing the almost silent whoosh of a properly lubed and adjusted bearing
4. finding the right color for cable housings
5. wrapping bar tape
6. getting the shifter housing length just right so the loops touch in front of the headtube
7. building wheels
Really Like:
1. the first ride of a newly built bike - spokes flashing in the sun as the wheels turn
2. a 15mph tailwind on the last leg of a long ride
3. riding a freshly serviced 35 year old bike on a metric century and having zero issues
4. riding with good friends
__________________
Dale, NL4T
Dale, NL4T
Likes For speedevil:
#57
smelling the roses
Join Date: Nov 2010
Location: Tixkokob, Yucatán, México
Posts: 15,320
Bikes: 79 Trek 930, 80 Trek 414, 84 Schwinn Letour Luxe (coupled), 92 Schwinn Paramount PDG 5
Mentioned: 104 Post(s)
Tagged: 1 Thread(s)
Quoted: 7081 Post(s)
Liked 901 Times
in
612 Posts
On the issue of hate and procrastination, I am more than one year into a re-paint of my coupled bike. I did some sanding on the rear triangle six months ago. It falls in with the cleaning/polishing hate. Detail work is just not my cup of tea.
#58
Member
Join Date: Mar 2019
Location: Long guy land NY
Posts: 29
Bikes: a bunch of stuff partial list its becoming a disease 69 Drake 3 spd 87Lotus elan 75, Atala 1988 corsa professionista, Matsuri track kieran bike 1972 astra tour de france
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 12 Post(s)
Likes: 0
Liked 3 Times
in
2 Posts
I hate using a tool and placing it down somewhere then spending 5 minutes looking around for it , happens about 8 times and hour 40 minutes wasted.
I like most things working on a bike, but the most satisfying is taking it out for a spin and whatever you were working on works.
I like most things working on a bike, but the most satisfying is taking it out for a spin and whatever you were working on works.
Likes For cromagnum:
#59
Strong Walker
least liked:
- cleaning rd pulleys (yuck!)
close second being gluing new tubulars with tubasti
- cleaning rd pulleys (yuck!)
close second being gluing new tubulars with tubasti
#60
Senior Member
Join Date: Jun 2010
Location: Medford MA
Posts: 2,089
Bikes: Ron Cooper touring, 1959 Jack Taylor 650b ladyback touring tandem, Vitus 979, Joe Bell painted Claud Butler Dalesman, Colin Laing curved tube tandem, heavily-Dilberted 1982 Trek 6xx, René Herse tandem
Mentioned: 80 Post(s)
Tagged: 0 Thread(s)
Quoted: 964 Post(s)
Liked 1,451 Times
in
723 Posts
For stuck Fixed cups I've found that the tool I made as per Sheldon Brown's Tool Hint works a charm.
https://www.sheldonbrown.com/tooltips/bbcups.html
Cheers
https://www.sheldonbrown.com/tooltips/bbcups.html
Cheers
It's never a problem on my bike, only on friends' rigs. Which says more about the friends I have and how they care for their bikes than anything else. For these people I usually put the new bottom bracket in with generous amounts of anti-seize paste.
#61
Trek DS Fan
I pretty much enjoy everything about working on bikes. One thing I hate is when something is made on so tight, I think I might break it trying to get it off. PB Blaster helps alot.
#63
Passista
Join Date: Jul 2005
Posts: 7,597
Bikes: 1998 Pinarello Asolo, 1992 KHS Montaña pro, 1980 Raleigh DL-1, IGH Hybrid, IGH Utility
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 866 Post(s)
Liked 721 Times
in
396 Posts
Just the opposite to the OP...
Love: building/truing wheels. Riding on my own wheels gives me a sense of accomplishment, more than any other bike related work.
Not hate but not really like: bar taping. I'm not good at it, that might be the cause...
I don't really hate any bike work.
Love: building/truing wheels. Riding on my own wheels gives me a sense of accomplishment, more than any other bike related work.
Not hate but not really like: bar taping. I'm not good at it, that might be the cause...
I don't really hate any bike work.
#64
No one cares
i like working on bikes, but not when I'm trying to ride them.
__________________
I prefer emails to private messages - holiday76@gmail.com
Jack Taylor Super Tourer Tandem (FOR SALE), Jack Taylor Tour of Britain, Px-10, Carlton Flyer, Fuji The Finest, Salsa Fargo, Santa Cruz Tallboy, Carver All-Road .
I prefer emails to private messages - holiday76@gmail.com
Jack Taylor Super Tourer Tandem (FOR SALE), Jack Taylor Tour of Britain, Px-10, Carlton Flyer, Fuji The Finest, Salsa Fargo, Santa Cruz Tallboy, Carver All-Road .
#65
Senior Member
Join Date: Jan 2004
Location: atlanta ga
Posts: 245
Bikes: road: 1999 GT road:40Kmi+ // 2001 fuji finest AL:9Kmi+//1991 schwinn paramount ODG:0.1Kmi+
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 19 Post(s)
Likes: 0
Liked 10 Times
in
7 Posts
cup/cone wheel bearings, disassembly(all the grease and dirt), cone adjustment (fussiness)
#67
Newbie
I love most wrenching tasks. Even if it's frustrating, always get great satisfaction when the job is done.
I absolutely despise mounting tubeless tires. Swapped my road tubeless wheels back to tubes since it was driving me crazy. I heard mountain bike tires are easier, but I haven't converted me new mountain bike to tubeless yet.
I absolutely despise mounting tubeless tires. Swapped my road tubeless wheels back to tubes since it was driving me crazy. I heard mountain bike tires are easier, but I haven't converted me new mountain bike to tubeless yet.
#68
Senior Member
Join Date: Jan 2004
Location: Madison, WI USA
Posts: 6,154
Mentioned: 50 Post(s)
Tagged: 0 Thread(s)
Quoted: 2363 Post(s)
Liked 1,749 Times
in
1,191 Posts
I FINALLY get around to catching up on this thread, and you had to post this:
Well, I'll read the article tomorrow.
Like - almost everything. Bringing any old inop bike back to life. That first test ride, even when you know there's plenty more work to do. Oddly, I especially like discovering some of the "creative" maintenance gaffes left by previous owners. Bikes that we "bottom-feed", from the thrift store or free CL, etc. Some were obviously given up for dead, just because so many things were wrong, and/or were badly ham-fisted. It's fun finding out that reversing all those gaffes is all the bike really needed.
Dislike - taping drop bars. Yeah, seems to be a favorite "like" in this thread. And my last tape job, I think I did pretty well (Calvin Jones method). But I don't like having to commit to a tape color. And I'm terrible at keeping some colors clean; they get dirty just by looking at them. Also, I'm always second-guessing whether I've put the levers in the right position. It's one of those ops that's not amenable to tweaking afterward, and post-op tweaking is in my nature.
For the other procrastinators out there (I am perhaps a charter member in the club), I offer this recent article from the NY Times:
Why You Procrastinate (It Has Nothing to Do With Self-Control)
Why You Procrastinate (It Has Nothing to Do With Self-Control)
Like - almost everything. Bringing any old inop bike back to life. That first test ride, even when you know there's plenty more work to do. Oddly, I especially like discovering some of the "creative" maintenance gaffes left by previous owners. Bikes that we "bottom-feed", from the thrift store or free CL, etc. Some were obviously given up for dead, just because so many things were wrong, and/or were badly ham-fisted. It's fun finding out that reversing all those gaffes is all the bike really needed.
Dislike - taping drop bars. Yeah, seems to be a favorite "like" in this thread. And my last tape job, I think I did pretty well (Calvin Jones method). But I don't like having to commit to a tape color. And I'm terrible at keeping some colors clean; they get dirty just by looking at them. Also, I'm always second-guessing whether I've put the levers in the right position. It's one of those ops that's not amenable to tweaking afterward, and post-op tweaking is in my nature.
#69
Junior Member
Most/Least Liked Wrenching Tasks
It will roll around the bike stand with you, and be the "somewhere" to put your tools down. You will lay out all your tools and supplies for the job at hand, then be like a surgeon ready to operate.
Least liked task: the hours spent searching for the runaway bearing ball or whatever tiny part gravity has just plucked right out of my fingers and launched across the floor to never-gonna-find-it-land.
Movelo
Likes For movelo:
#70
Senior Member
Oh I'm smoking ass pissed the eff off right now... trying to thread a brake cable through a cable yoke- and it started unstranding the cable- I didn't solder the end enough, or high enough up...
Untitled by Dave The Golden Boy, on Flickr
Untitled by Dave The Golden Boy, on Flickr
Don't get your undies in a twist
Don't be afrayed to try again
Time to solder on
#71
Senior Member
Join Date: Mar 2013
Location: Maryland
Posts: 3,799
Bikes: Lots of English 3-speeds, a couple of old road bikes, 3 mountain bikes, 1 hybrid, and a couple of mash-ups
Mentioned: 53 Post(s)
Tagged: 0 Thread(s)
Quoted: 887 Post(s)
Liked 335 Times
in
225 Posts
For the other procrastinators out there (I am perhaps a charter member in the club), I offer this recent article from the NY Times:
Why You Procrastinate (It Has Nothing to Do With Self-Control)
Why You Procrastinate (It Has Nothing to Do With Self-Control)
#72
Senior Member
Join Date: Oct 2005
Location: Upper Left, USA
Posts: 1,915
Mentioned: 50 Post(s)
Tagged: 0 Thread(s)
Quoted: 634 Post(s)
Liked 444 Times
in
298 Posts
Love: building bikes
Least liked: cleaning and lubing chains and adjusting threaded headsets. I don't particularly love adjusting hubs, but I see it as a challenge to be overcome that usually ends up well.
Least liked: cleaning and lubing chains and adjusting threaded headsets. I don't particularly love adjusting hubs, but I see it as a challenge to be overcome that usually ends up well.
#73
Senior Member
Join Date: Jun 2006
Location: NW Burbs, Chicago
Posts: 12,053
Mentioned: 201 Post(s)
Tagged: 0 Thread(s)
Quoted: 3015 Post(s)
Liked 3,792 Times
in
1,406 Posts
#74
Newbie
Join Date: Feb 2013
Location: Reno, NV
Posts: 53
Bikes: '94 Eddy Merckx Century TSX '86 Schwinn Paramount, '89 Schwinn Paramount, '84 Specialized Sequoia, '85 Schwinn Le Tour Luxe, '86 Schwinn Prelude, '92 Cannondale T600, '78 Guerciotti, '91 Giant ATX 770, '87 Schwinn Le Tour(beater)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 15 Post(s)
Liked 28 Times
in
18 Posts
Least enjoyed tasks
Don't do that much wrenching other than minor adjustments, but adjusting Brakes has to be my least favorite. Went so far as to switch from V-brakes to Cantilevers because of all the hassles I had with the V-brakes.
#75
Senior Member
Join Date: Jun 2010
Location: Medford MA
Posts: 2,089
Bikes: Ron Cooper touring, 1959 Jack Taylor 650b ladyback touring tandem, Vitus 979, Joe Bell painted Claud Butler Dalesman, Colin Laing curved tube tandem, heavily-Dilberted 1982 Trek 6xx, René Herse tandem
Mentioned: 80 Post(s)
Tagged: 0 Thread(s)
Quoted: 964 Post(s)
Liked 1,451 Times
in
723 Posts
I feel the same way. Smooth posts with serrated tapered washers as found on Shimano SLR (MC-70 or MT-60/62) cantilever brakes separate the adjustment of toe and angle (yaw and roll axes for you aviators out there) into discrete separate steps of adjustment. This is in contrast to the V-brake setup with ball/socket washers where you have to get the pad oriented exactly and hold it there while tightening the bolt, which is no mean feat.