Best looking components, let's list them all!
#26
Senior Member
Join Date: Apr 2011
Location: Maryland, USA
Posts: 2,456
Bikes: Drysdale/Gitane/Zeus/Masi/Falcon/Palo Alto/Raleigh/Legnano
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 988 Post(s)
Liked 656 Times
in
414 Posts
__________________
Larry:1958 Drysdale, 1961 Gitane Gran Sport, 1974 Zeus track, 1988 Masi Gran Corsa, 1974 Falcon, 1980 Palo Alto, 1973 Raleigh Gran Sport, 1974 Legnano. Susan: 1976 Windsor Profesional.
Larry:1958 Drysdale, 1961 Gitane Gran Sport, 1974 Zeus track, 1988 Masi Gran Corsa, 1974 Falcon, 1980 Palo Alto, 1973 Raleigh Gran Sport, 1974 Legnano. Susan: 1976 Windsor Profesional.
#27
Newbie
Jubilee
Many years ago I had the long-cage Jubilee on a bike.
Gorgeous, worked well and was quite light.
Gorgeous, worked well and was quite light.
Huret Jubilee rear derailleur.
Campy Delta calipers.
Polished Stronglight and Nervar cranks.
Campy Gran Sport 3 arm steel cranks.
1st gen Suntour Superbe cranks.
Shiny large flange "continental" hubs: Airlite, Racelite, Harden, Shelwin, FB, Campy GS.
Lyotard 23 "Berthet" pedals with stainless clips.
Campy Delta calipers.
Polished Stronglight and Nervar cranks.
Campy Gran Sport 3 arm steel cranks.
1st gen Suntour Superbe cranks.
Shiny large flange "continental" hubs: Airlite, Racelite, Harden, Shelwin, FB, Campy GS.
Lyotard 23 "Berthet" pedals with stainless clips.
#28
Senior Member
Join Date: Jun 2021
Posts: 1,697
Bikes: '38 Schwinn New World, ’69 Peugeot PX-10, '72 Peugeot PX-10, ‘7? Valgan, '78 Raleigh Comp GS, ’79 Holdsworth Pro, ’80 Peugeot TH-8 tandem, '87 Trek 400T, ‘7? Raleigh Sports, ‘7? Raleigh Superbe, ‘6? Hercules
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 765 Post(s)
Liked 1,603 Times
in
766 Posts
Likes For ehcoplex:
#29
Senior Member
Join Date: Feb 2008
Location: Peoria, IL
Posts: 4,487
Mentioned: 86 Post(s)
Tagged: 0 Thread(s)
Quoted: 1833 Post(s)
Liked 3,408 Times
in
1,590 Posts
I'd nominate just about any of the ornate parts that Curtis Odom makes (modifies?) for show bikes.
Here's a hub of his on a Cherubim Pista bike at the 2015 NAHBS in Louisville....
Steve in Peoria
Here's a hub of his on a Cherubim Pista bike at the 2015 NAHBS in Louisville....
Steve in Peoria
#30
Senior Member
Join Date: Jan 2016
Posts: 3,472
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 882 Post(s)
Liked 2,310 Times
in
1,292 Posts
Early Campagnolo Panto levers from Greg Softley
Panto chainrings from Greg Sftley mounted on an Ambrosio cut out crank for that "Mexico" look!
I now have the pantographed early Cinelli stem as well , sorry no pics yet. Next will be the seat post!! Joe
This, prior to cleaning and installing. It is on the bike now but no recent pics
Last edited by Kabuki12; 03-29-24 at 09:31 AM.
Likes For Kabuki12:
#31
Ride, Wrench, Swap, Race
Join Date: Jan 2010
Location: Northern California
Posts: 9,197
Bikes: Cheltenham-Pedersen racer, Boulder F/S Paris-Roubaix, Varsity racer, '52 Christophe, '62 Continental, '92 Merckx, '75 Limongi, '76 Presto, '72 Gitane SC, '71 Schwinn SS, etc.
Mentioned: 132 Post(s)
Tagged: 0 Thread(s)
Quoted: 1566 Post(s)
Liked 1,300 Times
in
867 Posts
#32
Steel is real
Join Date: Mar 2013
Location: Not far from Paris
Posts: 1,984
Bikes: 1992Giant Tourer,1992MeridaAlbon,1996Scapin,1998KonaKilaueua,1993Peugeot Prestige,1991RaleighTeamZ(to be upgraded),1998 Jamis Dragon,1992CTWallis(to be built),1998VettaTeam(to be built),1995Coppi(to be built),1993Grandis(to be built)
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 671 Post(s)
Liked 991 Times
in
658 Posts
Likes For georges1:
#33
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,938
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2484 Post(s)
Liked 3,218 Times
in
2,026 Posts
I have one of those model of Maxy cranks. Not sure I will ever use it but they are pretty cool, even without the extra bling.
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super, 1971 Raleigh International, 1998 Corratec Ap & Dun, 1991 Peugeot Slimestone
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super, 1971 Raleigh International, 1998 Corratec Ap & Dun, 1991 Peugeot Slimestone
#34
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,115
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 269 Post(s)
Tagged: 0 Thread(s)
Quoted: 4528 Post(s)
Liked 6,425 Times
in
3,698 Posts
Likes For merziac:
#35
aged to perfection
Join Date: Jun 2009
Location: PacNW
Posts: 1,852
Bikes: Dinucci Allez 2.0, Richard Sachs, Alex Singer, Serotta, Masi GC, Raleigh Pro Mk.1, Hetchins, etc
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 851 Post(s)
Liked 1,278 Times
in
674 Posts
really enjoyed this thread. Some great stuff that they don't make any more. One of my faves that was not mentioned was these TA Carmina cranks. In my opinion the best square taper cranks ever made. they have a unique spider, splined attachment with lock ring, so you can run double, triple, and a variety of BCDs just by swapping the spider. There are 2 versions of these, the later version had a cracking problem because of a sharp edge on the backside milling. These are early type, no problems with them, and I'm running XTR titanium crank bolts and ebay titanium chainring bolts. Pretty cool and not common.
/markp
/markp
#36
Junior Member
Join Date: Sep 2017
Location: Seattle
Posts: 147
Bikes: Masi Gran Criterium, Derosa, Ron Cooper, Davidson, Miyata 912, Le Jeune, Klein Rascals, AMP Research B3, B4, B5, PX10,Holdsworth, Schwinn Paramount, Frejus, Erickson, Simoncini SLX, Cecil Walker
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 54 Post(s)
Liked 116 Times
in
52 Posts
I'm really a first gen Superbe owner, but the first round of Superbe Pro, with the satin finish on the rear derailleur, was a lovely group:
Shift levers always looked too slippery for my liking.
The Ofmega Mistral crankset was very period specific but really remarkable:
Shift levers always looked too slippery for my liking.
The Ofmega Mistral crankset was very period specific but really remarkable:
Likes For cheffyjay:
Likes For Reynolds 531:
#38
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,938
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2484 Post(s)
Liked 3,218 Times
in
2,026 Posts
I'm really a first gen Superbe owner, but the first round of Superbe Pro, with the satin finish on the rear derailleur, was a lovely group:
Shift levers always looked too slippery for my liking.
The Ofmega Mistral crankset was very period specific but really remarkable:
Shift levers always looked too slippery for my liking.
The Ofmega Mistral crankset was very period specific but really remarkable:
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super, 1971 Raleigh International, 1998 Corratec Ap & Dun, 1991 Peugeot Slimestone
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super, 1971 Raleigh International, 1998 Corratec Ap & Dun, 1991 Peugeot Slimestone
Likes For jdawginsc:
#39
Phyllo-buster
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,851
Bikes: roadsters, club bikes, fixed and classic
Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2298 Post(s)
Liked 2,057 Times
in
1,256 Posts
Likes For gearbasher:
#41
Senior Member
Join Date: Jun 2006
Location: NW Burbs, Chicago
Posts: 12,066
Mentioned: 201 Post(s)
Tagged: 0 Thread(s)
Quoted: 3017 Post(s)
Liked 3,822 Times
in
1,414 Posts
^^^^^^^^^^^
Most modern stuff does little for me, but those Sheriff Stars are the clear exception.
Most modern stuff does little for me, but those Sheriff Stars are the clear exception.
#42
Senior Member
Likes For rjhammett:
#43
Senior Member
Join Date: Jun 2021
Posts: 1,697
Bikes: '38 Schwinn New World, ’69 Peugeot PX-10, '72 Peugeot PX-10, ‘7? Valgan, '78 Raleigh Comp GS, ’79 Holdsworth Pro, ’80 Peugeot TH-8 tandem, '87 Trek 400T, ‘7? Raleigh Sports, ‘7? Raleigh Superbe, ‘6? Hercules
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 765 Post(s)
Liked 1,603 Times
in
766 Posts
Clipless pedals in general IMO look awful, but at least are practically invisible with shoes clipped into them. Though these aren't made anymore, technically I don't think their production run years are in 'vintage/classic' territory (yet), but of all the clipless I think they're the best looking and somehow aren't aesthetic egregious on a vintage ride.....
PD-A520
PD-A520
#46
Senior Member
Join Date: Dec 2016
Posts: 590
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 192 Post(s)
Liked 568 Times
in
198 Posts
Simplex Super LJ 6600 ensemble…
Stronglight mod. 107 crankset…
Mafac “Course Perforee” levers
Alex Singer custom stem….It is 112 mm…just because..
Mafac LS brakes
Specialites TA Alize (mk. 1) crankset
Specialites TA Tevano crankset
Specialites TA Tevano crankset. At a quick glance or from a distance easily mistaken for Campagnolo Super Record, but it is much slimmer…
#47
Making up the numbers
Join Date: Jun 2022
Posts: 286
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 110 Post(s)
Liked 514 Times
in
164 Posts
If I were to find a Stronglight 107 crankset like that an entire 531SL Peugeot would eventually grow from it…
__________________
Nothing quite says wall hanger like drillium toe straps
Nothing quite says wall hanger like drillium toe straps
#48
Senior Member
Join Date: Jun 2021
Posts: 1,697
Bikes: '38 Schwinn New World, ’69 Peugeot PX-10, '72 Peugeot PX-10, ‘7? Valgan, '78 Raleigh Comp GS, ’79 Holdsworth Pro, ’80 Peugeot TH-8 tandem, '87 Trek 400T, ‘7? Raleigh Sports, ‘7? Raleigh Superbe, ‘6? Hercules
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 765 Post(s)
Liked 1,603 Times
in
766 Posts
#49
Senior Member
Join Date: Jun 2021
Posts: 1,697
Bikes: '38 Schwinn New World, ’69 Peugeot PX-10, '72 Peugeot PX-10, ‘7? Valgan, '78 Raleigh Comp GS, ’79 Holdsworth Pro, ’80 Peugeot TH-8 tandem, '87 Trek 400T, ‘7? Raleigh Sports, ‘7? Raleigh Superbe, ‘6? Hercules
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 765 Post(s)
Liked 1,603 Times
in
766 Posts
I love the elegant simplicity of the Mafac cantilevers..
Likes For ehcoplex: