Deore SL-MT60 Shifters Question
#1
Senior Member
Thread Starter
Join Date: Aug 2015
Location: Hartselle, Alabama
Posts: 139
Bikes: '86 Trek Cirrus 520, '85 Trek 620, '84 Trek 610
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 24 Post(s)
Likes: 0
Liked 7 Times
in
4 Posts
Deore SL-MT60 Shifters Question
Can these be disassembled for cleaning or do you just have to flush out the best you can? If they can be disassembled, does anyone know of a diagram?
(photo from Velobase)
(photo from Velobase)
#2
Me duelen las nalgas
Join Date: Aug 2015
Location: Texas
Posts: 13,513
Bikes: Centurion Ironman, Trek 5900, Univega Via Carisma, Globe Carmel
Mentioned: 199 Post(s)
Tagged: 0 Thread(s)
Quoted: 4560 Post(s)
Liked 2,802 Times
in
1,800 Posts
Check Shimano's tech document site. It's pretty thorough and has PDFs for those shifters.
Also, check RJ the Bike Guy on YouTube. Tons of videos for DIY repairs. Usually he suggests flooding balky shifters with WD-40 or something similar to work out the congealed old grease. Worked on my older Dura Ace brifters. The tricky bit is re-lubing without disassembly. I'm gonna try some fancy PTFE lube and see if it's a suitable substitute for grease.
Also, check RJ the Bike Guy on YouTube. Tons of videos for DIY repairs. Usually he suggests flooding balky shifters with WD-40 or something similar to work out the congealed old grease. Worked on my older Dura Ace brifters. The tricky bit is re-lubing without disassembly. I'm gonna try some fancy PTFE lube and see if it's a suitable substitute for grease.
#3
Senior Member
Thread Starter
Join Date: Aug 2015
Location: Hartselle, Alabama
Posts: 139
Bikes: '86 Trek Cirrus 520, '85 Trek 620, '84 Trek 610
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 24 Post(s)
Likes: 0
Liked 7 Times
in
4 Posts
Check Shimano's tech document site. It's pretty thorough and has PDFs for those shifters.
Also, check RJ the Bike Guy on YouTube. Tons of videos for DIY repairs. Usually he suggests flooding balky shifters with WD-40 or something similar to work out the congealed old grease. Worked on my older Dura Ace brifters. The tricky bit is re-lubing without disassembly. I'm gonna try some fancy PTFE lube and see if it's a suitable substitute for grease.
Also, check RJ the Bike Guy on YouTube. Tons of videos for DIY repairs. Usually he suggests flooding balky shifters with WD-40 or something similar to work out the congealed old grease. Worked on my older Dura Ace brifters. The tricky bit is re-lubing without disassembly. I'm gonna try some fancy PTFE lube and see if it's a suitable substitute for grease.
#4
Me duelen las nalgas
Join Date: Aug 2015
Location: Texas
Posts: 13,513
Bikes: Centurion Ironman, Trek 5900, Univega Via Carisma, Globe Carmel
Mentioned: 199 Post(s)
Tagged: 0 Thread(s)
Quoted: 4560 Post(s)
Liked 2,802 Times
in
1,800 Posts
Yeah, in other tech documents for SIS shifters, Shimano recommends against disassembling those indexing modules.
#5
Senior Member
Join Date: Jan 2004
Location: Madison, WI USA
Posts: 6,157
Mentioned: 50 Post(s)
Tagged: 0 Thread(s)
Quoted: 2363 Post(s)
Liked 1,749 Times
in
1,191 Posts
Are they stiff or sticky? A quick shot of light lubricant is all you should need with thumbies. There are no pawls or ratchets that can fail to engage.
#6
Senior Member
Join Date: Apr 2007
Location: Ottawa, Canada
Posts: 777
Bikes: Raleigh Classic 15, 84; Miyata 912, 85; Miyata Ridge Runner SE, 85; Miyata 610, 86; Miyata 100M, 86; Miyata Valley Runner, 88; Miyata Triple Cross, 89; GT Karakoram, 90; Miyata Elevation 300, 91; Marinoni Touring, 95; Long Haul Trucker, 2013
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 159 Post(s)
Liked 133 Times
in
80 Posts
The pdf says:
"Lower body unit—never attempt to disassemble." !
"Lower body unit—never attempt to disassemble." !
#7
Hoards Thumbshifters
Join Date: Jul 2010
Location: Signal Mountain, TN
Posts: 1,157
Bikes: '23 Black Mtn MC, '87 Bruce Gordon Chinook, '08 Jamis Aurora, '86 Trek 560, '97 Mongoose Rockadile, & '91 Trek 750
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 246 Post(s)
Liked 338 Times
in
193 Posts
Do not use wd-40, do not use wd-40
Use a ptfe based lube like Triflow, but if you want to clear out the gunk use electrical cleaner and hose it down, then lube with a ptfe based lube. On thumbshifters I wouldn't necessarily worry about disassembly unless very bad. Those are great shifters.
#8
Senior Member
Thread Starter
Join Date: Aug 2015
Location: Hartselle, Alabama
Posts: 139
Bikes: '86 Trek Cirrus 520, '85 Trek 620, '84 Trek 610
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 24 Post(s)
Likes: 0
Liked 7 Times
in
4 Posts
Thanks to all for the replies. I have one that is really stiff and doesn't want to shift all the gears. I'll flush and lube as suggested.