Rescued 1972 Peugeot PX10!
#1
Rouleur
Thread Starter
Rescued 1972 Peugeot PX10!
When I started posting here, I described in the Newbie thread about the little gold mine I hit. I was shopping in a dingy antique mall - more of a junk shop really, but came across a bike that really caught my attention. It was filthy - think that nasty dusty grease that collects on your range hood, or cosmoline and dirt. Well, I bought the bike anyways - for a whopping $100.00. After hours of washing and scrubbing into every nook and cranny, something marvelous appeared. I didn't really take many "before and after" photos, because what I uncovered was beyond all expectations. In the past two weeks, I have replaced all the cable housings, gotten new Newbaums cloth bar tape, and disassembled and repacked every bearing, and worked with steel wool and aluminum foil to polish up the whole bike. I replaced the Reynolds 531 stickers, and had to repair two big dings in the paint, as well as some rubs in the logos and bands. It's not a shiny, showroom restoration, because I'm going to RIDE THIS LIKE I STOLE IT! The only thing not original to the bike are the wheels, although the freewheel is - and the hubs are Maillard and the rims are Mavic. If you can see them - check out the handlebar plugs, found those on eBay for a nice finishing touch.
Likes For tgenec86:
#2
Mr. Anachronism
Join Date: Jan 2013
Location: Somewhere west of Tobie's
Posts: 2,087
Bikes: fillet-brazed Chicago Schwinns, and some other stuff
Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 526 Post(s)
Liked 256 Times
in
165 Posts
Wow... stellar work!!! You did well for a Franklin!!!
__________________
"My only true wisdom is in knowing I have none" -Socrates
"My only true wisdom is in knowing I have none" -Socrates
#3
Senior Member
Join Date: Feb 2013
Location: Alta California
Posts: 14,260
Mentioned: 415 Post(s)
Tagged: 1 Thread(s)
Quoted: 3810 Post(s)
Liked 3,335 Times
in
2,175 Posts
-----
Beautiful job!
Thanks very much for posting.
Dunno why those Lyotard model 36 pedals are on there, they should be model 45CA.
Wheels too late for 1972, but then you of course know that already.
OEM bar plugs would have been VELOX black rubber.
For a factory look nuts on dropout adjusters should be facing outward.
You have the nut on the cycle's ALGI seat binder mounted backwards.
Great work!
-----
Beautiful job!
Thanks very much for posting.
Dunno why those Lyotard model 36 pedals are on there, they should be model 45CA.
Wheels too late for 1972, but then you of course know that already.
OEM bar plugs would have been VELOX black rubber.
For a factory look nuts on dropout adjusters should be facing outward.
You have the nut on the cycle's ALGI seat binder mounted backwards.
Great work!
-----
Last edited by juvela; 10-14-19 at 08:01 PM. Reason: addition
#4
feros ferio
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,796
Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1392 Post(s)
Liked 1,324 Times
in
836 Posts
Tres bien!
I see someone already replaced the OEM 45T inner chainring with a 40. The other popular mod was to replace the 14-21 freewheel with a 14-26 or 14-28. Very nice machine, and the Brooks saddle looks to be in good shape, nicely broken in.
I see someone already replaced the OEM 45T inner chainring with a 40. The other popular mod was to replace the 14-21 freewheel with a 14-26 or 14-28. Very nice machine, and the Brooks saddle looks to be in good shape, nicely broken in.
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
#5
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,435
Bikes: A bunch of old bikes and a few new ones
Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5888 Post(s)
Liked 3,471 Times
in
2,079 Posts
Great bike and nice work. It's pretty hilly in central NY. If you decide you need greater gear range, there are ways to mod the bike to make that happen.
#7
Ride, Wrench, Swap, Race
Join Date: Jan 2010
Location: Northern California
Posts: 9,193
Bikes: Cheltenham-Pedersen racer, Boulder F/S Paris-Roubaix, Varsity racer, '52 Christophe, '62 Continental, '92 Merckx, '75 Limongi, '76 Presto, '72 Gitane SC, '71 Schwinn SS, etc.
Mentioned: 132 Post(s)
Tagged: 0 Thread(s)
Quoted: 1565 Post(s)
Liked 1,295 Times
in
865 Posts
looks great, like a well set up PX10.
I understand the choice of pedals, for those that prefer to rice without the toe clips and straps. My feet were just too wide for the stock PX10 pedals.
I wouldn't expect the MTB shoes to grab the pedals all that well, but if a softer-soled shoe is uncomfortable, then those might be the best choice.
I understand the choice of pedals, for those that prefer to rice without the toe clips and straps. My feet were just too wide for the stock PX10 pedals.
I wouldn't expect the MTB shoes to grab the pedals all that well, but if a softer-soled shoe is uncomfortable, then those might be the best choice.
#8
Rouleur
Thread Starter
looks great, like a well set up PX10.
I understand the choice of pedals, for those that prefer to rice without the toe clips and straps. My feet were just too wide for the stock PX10 pedals.
I wouldn't expect the MTB shoes to grab the pedals all that well, but if a softer-soled shoe is uncomfortable, then those might be the best choice.
I understand the choice of pedals, for those that prefer to rice without the toe clips and straps. My feet were just too wide for the stock PX10 pedals.
I wouldn't expect the MTB shoes to grab the pedals all that well, but if a softer-soled shoe is uncomfortable, then those might be the best choice.
#9
Senior Member
Join Date: Aug 2014
Location: Bronx, NYC
Posts: 1,885
Bikes: '19 Fuji Gran Fondo 1.5, '72 Peugeot PX10, '71ish Gitane Super Corsa, '78 Fuji Newest, '89 Fuji Ace, '94 Cannondale R600, early '70s LeJeune Pro project
Mentioned: 87 Post(s)
Tagged: 0 Thread(s)
Quoted: 293 Post(s)
Liked 218 Times
in
101 Posts
Very nice find and stellar refurbishment!
#11
Senior Member
Join Date: May 2013
Location: Greenwood SC USA
Posts: 2,252
Bikes: 2002 Mercian Vincitore, 1982 Mercian Colorado, 1976 Puch Royal X, 1973 Raleigh Competition, 1971 Gitane Tour de France and others
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 823 Post(s)
Liked 1,395 Times
in
694 Posts
This is a truly beautiful bike, and I always like the distinctiveness of the '72s - the plain Nervex DuBois lugs painted black, with the original, more traditional geometry always stood out for me.
Likes For crank_addict:
#13
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,842
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Mentioned: 106 Post(s)
Tagged: 0 Thread(s)
Quoted: 2337 Post(s)
Liked 2,821 Times
in
1,540 Posts
Super nice and bonus points for cosmoline reference
__________________
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Likes For squirtdad:
#16
If I own it, I ride it
Join Date: Nov 2005
Location: Cardinal Country
Posts: 5,580
Bikes: Lejeune(14), Raleigh, Raysport, Jan De Reus, Gazelle, Masi, B. Carré(4), Springfield, Greg Lemond, Andre Bertin, Schwinn Paramount
Mentioned: 56 Post(s)
Tagged: 0 Thread(s)
Quoted: 591 Post(s)
Likes: 0
Liked 662 Times
in
311 Posts
Well done. I hope you have enough seat post left in the tube. That is a lot of post showing.
#17
Newbie
Very nice! What did you do to bring back the shine on the brakes and cranks?
#19
Rouleur
Thread Starter
If anyone is in the market for a nearly perfect original Simplex seat post, I'd take a reasonable offer! The Simplex logo is slightly damaged (pulled away from the tack weld on one side) but can easily be fixed in place. It shines like the day it was new...
Likes For tgenec86:
#21
Senior Member
Join Date: Jan 2017
Posts: 659
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 195 Post(s)
Liked 207 Times
in
126 Posts
When I started posting here, I described in the Newbie thread about the little gold mine I hit. I was shopping in a dingy antique mall - more of a junk shop really, but came across a bike that really caught my attention. It was filthy - think that nasty dusty grease that collects on your range hood, or cosmoline and dirt. Well, I bought the bike anyways - for a whopping $100.00. After hours of washing and scrubbing into every nook and cranny, something marvelous appeared. I didn't really take many "before and after" photos, because what I uncovered was beyond all expectations. In the past two weeks, I have replaced all the cable housings, gotten new Newbaums cloth bar tape, and disassembled and repacked every bearing, and worked with steel wool and aluminum foil to polish up the whole bike. I replaced the Reynolds 531 stickers, and had to repair two big dings in the paint, as well as some rubs in the logos and bands. It's not a shiny, showroom restoration, because I'm going to RIDE THIS LIKE I STOLE IT! The only thing not original to the bike are the wheels, although the freewheel is - and the hubs are Maillard and the rims are Mavic. If you can see them - check out the handlebar plugs, found those on eBay for a nice finishing touch.
#22
Senior Member
What s beautiful bike! Thank you for sharing the story and awesome pics.
#23
Rouleur
Thread Starter
Follow-up. After a month of careful eBay surveillance, I pounced on an excellent deal - a set of wheels with Maillard Professional Team Issue high flange hubs with what I have a suspicion are Rigida rims (stickers are long gone) I also replaced the Loytard 36 pedals with a bit sleeker of a pair. The Vittoria tires I had on it were a bit dry rotted and I had a pair of Panasonic Pasela's on hand so those got changed out as well - traditional gum walls look nice.
Likes For tgenec86:
#25
blahblahblah chrome moly
Join Date: Apr 2009
Location: Seattle
Posts: 1,986
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 1172 Post(s)
Liked 2,567 Times
in
1,072 Posts
Follow-up. After a month of careful eBay surveillance, I pounced on an excellent deal - a set of wheels with Maillard Professional Team Issue high flange hubs with what I have a suspicion are Rigida rims (stickers are long gone) I also replaced the Loytard 36 pedals with a bit sleeker of a pair. The Vittoria tires I had on it were a bit dry rotted and I had a pair of Panasonic Pasela's on hand so those got changed out as well - traditional gum walls look nice.
I ended up with two PX-10 frames, both circa 1970, and I have all the parts I need to build up at least one of them, down to the old wide 5-speed Sedis chain, black rubber Mafac toolkit, and original Simplex cable housing. But it's a big project, keeps getting put on the back burner. For example, I have the right hubs, rims and Trois Etoiles spokes in the right length, but if I build with the original rims, I'm stuck with tubular tires. If I build it with clinchers, then that opens the whole can o' worms of what else will I allow that's not original? Maybe I'll do a 650b conversion... Di2 shifters? [kidding!] So far I don't have answers to some of those questions and so I kick the can down the road, to decide later.
One of my PX-10 frames is possibly a goner, haven't decided whether to repair the frame. Get this: some previous owner put a cork in the seat tube to keep water out of the bottom bracket. Well, it worked -- the water that inevitably gets in through the slot in back of the seat lug, instead of going down to the BB shell, just puddled there on top of the cork. I don't know how many years it took, but rust eventually perforated the seat tube -- all the way around! The top part of the seat tube is completely disconnected from the bottom part, right at the top of where the cork ended up. I'm an ex-framebuilder, still have some equipment including an ocy-acetylene rig, so I can repair it, but is this old frame worth it? I prefer original paint and decals, no matter how much patina it has, so this one after repairing and repainting will be worth less to me (not worthless, just worth less). And I already have an almost identical frame. So this one continues to hang in my shed, waiting for me to make a decision.
Moral of the story: Look to see if someone put a cork in your seat tube, and if so, get it the heck out of there!