What is the cheapest/worst quality vintage bike that you own?
#26
Senior Member
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 9,592
Bikes: '65 Frejus TDF, '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '89 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8
Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 1617 Post(s)
Liked 2,225 Times
in
1,110 Posts
Many of these low end bikes look better than my Pinarello!
I really can't participate. My wifes Raleigh GP would almost qualify but she bought it new in 1974.
Raliegh_DSfront on Flickr
I really can't participate. My wifes Raleigh GP would almost qualify but she bought it new in 1974.
Raliegh_DSfront on Flickr
__________________
Bikes don't stand alone. They are two tired.
Bikes don't stand alone. They are two tired.
Likes For SJX426:
#27
Senior Member
Join Date: Jan 2013
Location: Norman, Oklahoma
Posts: 5,394
Bikes: Too many to list
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 1765 Post(s)
Liked 1,125 Times
in
746 Posts
Not sure if this qualifies , but this DeBErnardi is likely the most modest in my collection- Tubeset is Aelle TreTubi (seamed tubing) and groupset is Veloce 9 speed triple. Others have critiqued the bike and told me it didnt look "well sorted" with the Technomic and black zero offset seatpost -- built to ride though, not to look at. Really not that heavy despite the Aelle frame and heavy wheels and triple -- around 23 lbs
#28
Senior Member
Join Date: Aug 2015
Posts: 3,327
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 1150 Post(s)
Liked 1,780 Times
in
975 Posts
For me it is toss up with a Nishiki Competition and Raphael Geminiani.
Respectively the Nishiki was $40, and the Geminiani was $29. I've spent less on a few and had lower quality, but those have been sold on Craigslist or donated to Bike Works and the Bikery over covid lockdown time.
Respectively the Nishiki was $40, and the Geminiani was $29. I've spent less on a few and had lower quality, but those have been sold on Craigslist or donated to Bike Works and the Bikery over covid lockdown time.
#29
Full Member
Join Date: Jun 2021
Location: Barboursville, Va
Posts: 278
Bikes: N+1
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 94 Post(s)
Liked 419 Times
in
159 Posts
My bianchi volpe with a mix of 9 speed components.
it’s a nice bike, but I only have 3. The other two are a de rosa and a le champion, so…
it’s a nice bike, but I only have 3. The other two are a de rosa and a le champion, so…
Likes For Flatforkcrown:
#30
Cheerfully low end
Join Date: Jun 2020
Posts: 1,981
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 646 Post(s)
Liked 1,051 Times
in
670 Posts
Great save on your part.
Old, cheap, gaspipe, heavy.
While apt and somewhat accurate, these terms do not apply to Schwinn's for the most part by a long shot.
From Klunkers to Electro Forged frames, they are some of the toughest ever, generally indestructible in the hands of mere mortals let alone regular cyclists.
And no they weren't cheap either, but they were a very good value for the quality and reliability they delivered.
https://www.sheldonbrown.com/chicago-schwinns.html
Old, cheap, gaspipe, heavy.
While apt and somewhat accurate, these terms do not apply to Schwinn's for the most part by a long shot.
From Klunkers to Electro Forged frames, they are some of the toughest ever, generally indestructible in the hands of mere mortals let alone regular cyclists.
And no they weren't cheap either, but they were a very good value for the quality and reliability they delivered.
https://www.sheldonbrown.com/chicago-schwinns.html
And after more than 30 years of what appears to have been rough use, it’s able to tolerate my single speed riding on crushed stone trails and over rough wooden bridge crossings with a pretty high duty cycle of out of the saddle pedaling.
Otto
Likes For ofajen:
#31
Senior Member
Join Date: May 2008
Location: North, Ga.
Posts: 2,402
Bikes: 3Rensho-Aerodynamics, Bernard Hinault Look - 1986 tour winner, Guerciotti, Various Klein's & Panasonic's
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 159 Post(s)
Liked 377 Times
in
163 Posts
My bike of least quality? That would be my Panasonic DX 2000 from 1982. It is in pieces at the moment and needs paint. The DX 2000 is actually not a bad bike at all. Bottom of the line for a racing bike but with all the right parts. Next bike down in Panasonics line up would have turkey levers and stem shifters.
I hope to do a full restore on it one day.
I hope to do a full restore on it one day.
#32
Senior Member
Join Date: Dec 2016
Location: Long Island, NY
Posts: 2,127
Bikes: Trek 800 x 2, Schwinn Heavy Duti, Schwinn Traveler, Schwinn Le Tour Luxe, Schwinn Continental, Cannondale M400 and Lambert, Schwinn Super Sport
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 816 Post(s)
Liked 1,037 Times
in
674 Posts
I'm seeing some nice bikes here. I'm going to have to bring this thread down a notch or two. My boss was cleaning out his old house and this was his brother's bike. He asked me if I wanted it. Well a bike for free is a bike for me. This is how new projects start.
It is a made in Japan Royce Union from the late '70's. The frame has been used for paint practice. I used automotive paint left over from a friend's Jaguar restoration. Added graphics from the shop in Florida that @gugie recommended. DIYlettering . It is not a rolling bike yet, since I have others bikes in front that need to be completed and the paint worked out well. It will eventually find it's way to the front of the queue.
My list of bikes are probably lower end than most of the members here. They all work fine, ride well and are enjoyed. They also have way more money (and time) poured into them than any sane person would do. Low end frames with good wheels and tires works for me.
It is a made in Japan Royce Union from the late '70's. The frame has been used for paint practice. I used automotive paint left over from a friend's Jaguar restoration. Added graphics from the shop in Florida that @gugie recommended. DIYlettering . It is not a rolling bike yet, since I have others bikes in front that need to be completed and the paint worked out well. It will eventually find it's way to the front of the queue.
My list of bikes are probably lower end than most of the members here. They all work fine, ride well and are enjoyed. They also have way more money (and time) poured into them than any sane person would do. Low end frames with good wheels and tires works for me.
Likes For Velo Mule:
#33
Senior Member
Thread Starter
Join Date: Sep 2021
Posts: 726
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 265 Post(s)
Liked 347 Times
in
205 Posts
I have a strange "Pinarello" made in Germany that's typical "bike boom" level of quality. I got it impulsively as sort of an oddity.
The little information I could find about it is that it's not a counterfeit, but probably not affiliated in any way with the Pinarello company we know and love. It might just be a random company using an "Italian sounding" name to lend some aura of quality to an otherwise unremarkable bike.
Lugged steel, low end components, no complaints other than it's sort of an albatross in my collection.
The little information I could find about it is that it's not a counterfeit, but probably not affiliated in any way with the Pinarello company we know and love. It might just be a random company using an "Italian sounding" name to lend some aura of quality to an otherwise unremarkable bike.
Lugged steel, low end components, no complaints other than it's sort of an albatross in my collection.
#34
Senior Member
Thread Starter
Join Date: Sep 2021
Posts: 726
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 265 Post(s)
Liked 347 Times
in
205 Posts
Another possible contender. This thing is sitting in my basement, all stripped down. I did repack the headset and the BB. Very much at the bottom of my list for projects to finish.
German made Sprinter 3 speed. rear rim and hub were toast. It was free though!!!
German made Sprinter 3 speed. rear rim and hub were toast. It was free though!!!
#35
Crawlin' up, flyin' down
Join Date: Jan 2006
Location: Democratic Peoples' Republic of Berkeley
Posts: 5,701
Bikes: 1967 Paramount; 1982-ish Ron Cooper; 1978 Eisentraut "A"; two mid-1960s Cinelli Speciale Corsas; and others in various stages of non-rideability.
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 1053 Post(s)
Liked 2,597 Times
in
1,083 Posts
I don't think anything I have qualifies as bad quality. The cheapest I have is a Medici f/f that I got probably 10 years ago for a lowball "what the heck" bid on eBay (~$100, maybe less). Since nobody beat my bid, I ended up with it. It was powder coated (most likely) or repainted a nice sort-of burgundy color and given mediocre to poor repro graphics (they look home made). The seller said it was Tange Prestige tubing, but I cannot confirm that.
How does it ride? I don't know - I have never gotten around to building it up, the only frame I ever purchased that has not been called upon to hold up my weighty carcass. It languishes in my basement along with two formerly ridden but now retired frames (2000 Lemond Zurich, 1993 Russ Denny-built Fuso). It's probably time I moved them along . . . .
How does it ride? I don't know - I have never gotten around to building it up, the only frame I ever purchased that has not been called upon to hold up my weighty carcass. It languishes in my basement along with two formerly ridden but now retired frames (2000 Lemond Zurich, 1993 Russ Denny-built Fuso). It's probably time I moved them along . . . .
__________________
"I'm in shape -- round is a shape." Andy Rooney
"I'm in shape -- round is a shape." Andy Rooney
Likes For 55murray:
#37
Senior Member
Join Date: Jan 2019
Location: Toledo Ohio
Posts: 1,508
Bikes: 1964 Huffy Sportsman, 1972 Fuji Newest, 1973 Schwinn Super Sport (3), 1982 Trek 412, 1983 Trek 700, 1989 Miyata 1000LT, 1991 Bianchi Boardwalk, plus others
Mentioned: 21 Post(s)
Tagged: 0 Thread(s)
Quoted: 585 Post(s)
Liked 704 Times
in
397 Posts
Windmills
[QUOTE=55murray;22360345]My 1976 Kmart All-Pro cruiser. My brother outgrew it around 1981 and I got it.
[/QUOTE
My in laws in western Ohio live in the country right across the street from one of those windmill installations. Not sure how much I like it, but the sight is quite interesting.
My cheap bike is a 64 Huffy Sportsman 3 speed; basically a rebadged Raleigh Sports. Fun city ride and my only plain steel frame.
[/QUOTE
My in laws in western Ohio live in the country right across the street from one of those windmill installations. Not sure how much I like it, but the sight is quite interesting.
My cheap bike is a 64 Huffy Sportsman 3 speed; basically a rebadged Raleigh Sports. Fun city ride and my only plain steel frame.
Likes For sd5782:
#38
Senior Member
Join Date: Feb 2017
Location: Concord, NC
Posts: 708
Bikes: 1984 Bianchi Tipo Corsa, 1985 Cannondale SM600 (24/26)
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 238 Post(s)
Liked 353 Times
in
192 Posts
Great save on your part.
Old, cheap, gaspipe, heavy.
While apt and somewhat accurate, these terms do not apply to Schwinn's for the most part by a long shot.
From Klunkers to Electro Forged frames, they are some of the toughest ever, generally indestructible in the hands of mere mortals let alone regular cyclists.
And no they weren't cheap either, but they were a very good value for the quality and reliability they delivered.
https://www.sheldonbrown.com/chicago-schwinns.html
Old, cheap, gaspipe, heavy.
While apt and somewhat accurate, these terms do not apply to Schwinn's for the most part by a long shot.
From Klunkers to Electro Forged frames, they are some of the toughest ever, generally indestructible in the hands of mere mortals let alone regular cyclists.
And no they weren't cheap either, but they were a very good value for the quality and reliability they delivered.
https://www.sheldonbrown.com/chicago-schwinns.html
#39
feros ferio
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,821
Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1398 Post(s)
Liked 1,343 Times
in
848 Posts
In the past I have had a bottom-of-the-line Bianchi Corsa, an Armstrong 3-speed converted to a 3x4 hybrid drivetrain, a Schwinn Varsity, and an American-made Sears Free Spirit boat anchor.
My current bottom feeder would have to be my 1970 Peugeot UO-8 rust bucket, which at least has aluminum cranks and rims. The Siegers and the mountain bike were top-of-the-line for their respective marques.
My UO-8 with barcon cables routed between the rack and the cylindrical Bellwether front bag.
My current bottom feeder would have to be my 1970 Peugeot UO-8 rust bucket, which at least has aluminum cranks and rims. The Siegers and the mountain bike were top-of-the-line for their respective marques.
My UO-8 with barcon cables routed between the rack and the cylindrical Bellwether front bag.
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
Likes For John E:
#41
Full Member
Join Date: Apr 2017
Location: Lafayette, Indiana
Posts: 463
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 208 Post(s)
Liked 109 Times
in
59 Posts
The tires on that are just low end slicks (Fenix Cycles Wanda Road Slick P1179 Bicycle Tire, 26" x 1-3/8"). The bike is in my rotation for my short commute to work and the occasional winter ride where I just want to bundle up against the cold and cruise for a bit.
sd5782, I actually don't care for the industrialized look of these wind farms. This is north of me, and I was dismayed this year when I rode far west and found out they put in another huge one in western Warren County, a previously empty, pastoral area on the Illinois border. I see you are in Toledo, this bike is from Monroe MI.
sd5782, I actually don't care for the industrialized look of these wind farms. This is north of me, and I was dismayed this year when I rode far west and found out they put in another huge one in western Warren County, a previously empty, pastoral area on the Illinois border. I see you are in Toledo, this bike is from Monroe MI.
#42
Senior Member
Join Date: Jan 2019
Location: Toledo Ohio
Posts: 1,508
Bikes: 1964 Huffy Sportsman, 1972 Fuji Newest, 1973 Schwinn Super Sport (3), 1982 Trek 412, 1983 Trek 700, 1989 Miyata 1000LT, 1991 Bianchi Boardwalk, plus others
Mentioned: 21 Post(s)
Tagged: 0 Thread(s)
Quoted: 585 Post(s)
Liked 704 Times
in
397 Posts
The tires on that are just low end slicks (Fenix Cycles Wanda Road Slick P1179 Bicycle Tire, 26" x 1-3/8"). The bike is in my rotation for my short commute to work and the occasional winter ride where I just want to bundle up against the cold and cruise for a bit.
sd5782, I actually don't care for the industrialized look of these wind farms. This is north of me, and I was dismayed this year when I rode far west and found out they put in another huge one in western Warren County, a previously empty, pastoral area on the Illinois border. I see you are in Toledo, this bike is from Monroe MI.
sd5782, I actually don't care for the industrialized look of these wind farms. This is north of me, and I was dismayed this year when I rode far west and found out they put in another huge one in western Warren County, a previously empty, pastoral area on the Illinois border. I see you are in Toledo, this bike is from Monroe MI.
#43
Senior Member
Join Date: May 2012
Location: Point Reyes Station, California
Posts: 4,543
Bikes: Indeed!
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 1515 Post(s)
Liked 3,500 Times
in
1,142 Posts
Brent
Likes For obrentharris:
#44
Full Member
Join Date: Feb 2020
Location: Little Rock, AR
Posts: 276
Bikes: Lots of Schwinns
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 109 Post(s)
Liked 250 Times
in
114 Posts
have purchased several $10-$50 bikes and parted them or moved them on, but the lowest level of them that I have actually ridden was a '87 Schwinn World, I gifted it to my nephew even though it was my first ride in 1987 - nothing special about those, hi ten frame, the wheels may have even been steel instead of alumum, etc but I had no idea in '87 and put thousands of miles on it
of my current bikes, this '81 LeTour Frame is prob the lowest level - 1020 Carbon steel, but also one of my nicest...
'81 LeTour New Old Stock Frame, with a mismatched chrome fork
of my current bikes, this '81 LeTour Frame is prob the lowest level - 1020 Carbon steel, but also one of my nicest...
'81 LeTour New Old Stock Frame, with a mismatched chrome fork
Likes For justcynn:
#45
Senior Member
Join Date: Apr 2005
Location: Ann Arbor, MI
Posts: 16,900
Bikes: 1980 Masi, 1984 Mondonico, 1984 Trek 610, 1980 Woodrup Giro, 2005 Mondonico Futura Leggera ELOS, 1967 PX10E, 1971 Peugeot UO-8
Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 1869 Post(s)
Liked 666 Times
in
508 Posts
I'll go sacrilegious and say it's my rusty green (such a great color!!) 1970 or so Peugeot UO-8. It's actually a great ride, but my bud and I straightened a kinked steer tube to get it to a rideable geometry, and I took it out for 40 miles. Nice ride but then I got nervous about the weakened steerer, and I still am! I have all the parts and can move them over to clone frame brother of a bluer color - not as nice as the green, but it has no major frame damage or flaws. Here's a pic of the green Peug:
The Green Peug, set up for her ride. Long fork rake, deep seattube setback, classic old Ideale 92, a leftover Shimano 600 chainset/600 pedals, and some nameless sidepulls i still have not figured out. but nice functional brakes! Gave a good test ride! I wish I had another one of these green ones, I really like the gleaming metallic element.
Actually these wheels are Matrix tubular rims. I did the test ride on the original wheels, because I wanted to see how the original geometry and wheelset felt.
The Green Peug, set up for her ride. Long fork rake, deep seattube setback, classic old Ideale 92, a leftover Shimano 600 chainset/600 pedals, and some nameless sidepulls i still have not figured out. but nice functional brakes! Gave a good test ride! I wish I had another one of these green ones, I really like the gleaming metallic element.
Actually these wheels are Matrix tubular rims. I did the test ride on the original wheels, because I wanted to see how the original geometry and wheelset felt.
#46
Senior Member
Join Date: May 2020
Location: Great White North
Posts: 1,226
Bikes: 2013 Cannondale Caad 8, 2010 Opus Fidelio, 1985 Peugeot UO14, 1999 Peugeot Dune, Sakai Select, L'Avantage, 1971 Gitane Apache Standard, 1999 Specialized Hard Rock
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 548 Post(s)
Liked 473 Times
in
302 Posts
Not that I have much of a collection and this bike wasn't that cheap but it's what I call, all show and no go! A box store bike made of gas pipe frame that weighs a ton. Thought I could use it on the trainer for indoor riding but it just didn't fit well. Instead, I decided to throw on some accessories to see if it could be a touring bike but it would need new brakes. The only interesting thing about this bike is it's an Ovaltech triple crank which I thought might be good on hills.
#47
Junior Member
Join Date: May 2015
Location: Detroit, MI
Posts: 82
Bikes: 02 Cervelo P2K, 07 Cervelo P2SL, 07 Cervelo Soloist, 09 Cervelo RS, 96 Quintana Roo Kilo, 80 Chicago Schwinn Letour, 12 Motobecane Nemesis, 97 Kona AA, 97 Cannondale f700
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 11 Post(s)
Liked 35 Times
in
16 Posts
I have a strange "Pinarello" made in Germany that's typical "bike boom" level of quality. I got it impulsively as sort of an oddity.
The little information I could find about it is that it's not a counterfeit, but probably not affiliated in any way with the Pinarello company we know and love. It might just be a random company using an "Italian sounding" name to lend some aura of quality to an otherwise unremarkable bike.
Lugged steel, low end components, no complaints other than it's sort of an albatross in my collection.
The little information I could find about it is that it's not a counterfeit, but probably not affiliated in any way with the Pinarello company we know and love. It might just be a random company using an "Italian sounding" name to lend some aura of quality to an otherwise unremarkable bike.
Lugged steel, low end components, no complaints other than it's sort of an albatross in my collection.
Still, an interesting example of...something...lol.
Last edited by dpd3672; 01-07-22 at 04:24 PM.
Likes For dpd3672:
#48
Senior Member
Join Date: Apr 2007
Location: Thunder Bay, Ontario, Canada - burrrrr!
Posts: 11,691
Bikes: 1958 Rabeneick 120D, 1968 Legnano Gran Premio, 196? Torpado Professional, 2000 Marinoni Piuma
Mentioned: 211 Post(s)
Tagged: 0 Thread(s)
Quoted: 1377 Post(s)
Likes: 0
Liked 1,766 Times
in
946 Posts
Entry level seamed tubing Torpado with entry level components and steel rims. Given to me by a good friend for free. It was fun to street restore and I actually do like riding it...
__________________
"98% of the bikes I buy are projects".
"98% of the bikes I buy are projects".
Likes For randyjawa:
#49
Senior Member
Thread Starter
Join Date: Sep 2021
Posts: 726
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 265 Post(s)
Liked 347 Times
in
205 Posts
Sorry they're not "studio-ready," but pulled it down in the garage and snapped some quick photos. I think I took it for a quick test ride when I first bought it, 2 or 3 years ago, then put it up because it's likely never going to be in the heavy rotation of bikes I ride.
Still, an interesting example of...something...lol.
Still, an interesting example of...something...lol.
#50
Senior Member
Thread Starter
Join Date: Sep 2021
Posts: 726
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 265 Post(s)
Liked 347 Times
in
205 Posts
Sorry they're not "studio-ready," but pulled it down in the garage and snapped some quick photos. I think I took it for a quick test ride when I first bought it, 2 or 3 years ago, then put it up because it's likely never going to be in the heavy rotation of bikes I ride.
Still, an interesting example of...something...lol.
Still, an interesting example of...something...lol.