New classic frame
#26
Senior Member
I would not buy that frame. If I did, I certainly would not outfit it as shown with all those modern components.
To me, that frame represents the very last generation of steel frames. In that regard, I do not see it as classic, at all. Vertical drop outs, cast stay ends/seat lug,... so many of the details are non-traditional, non-classic.
I'm not going to even bother discussing the components, I just wouldn't have them. That frame might be okay if it were outfitted with Nuovo or Super Record or even first generation Dura Ace (most fitting of all) but then it would be a mismatch of eras.
Buy a truly classic & vintage frame, not a knock off. Get an old, Italian - MASI or CINELLI or an old COLNAGO, etc. Get an old, British bike. How about a PEUGEOT PX-10 or a SCHWINN PARAMOUNT?
P.S. - Nothing I am posting is meant to disparage what I am sure is an excellent steel frame. It just isn't classic and I wouldn't spend that kind of money on it.
To me, that frame represents the very last generation of steel frames. In that regard, I do not see it as classic, at all. Vertical drop outs, cast stay ends/seat lug,... so many of the details are non-traditional, non-classic.
I'm not going to even bother discussing the components, I just wouldn't have them. That frame might be okay if it were outfitted with Nuovo or Super Record or even first generation Dura Ace (most fitting of all) but then it would be a mismatch of eras.
Buy a truly classic & vintage frame, not a knock off. Get an old, Italian - MASI or CINELLI or an old COLNAGO, etc. Get an old, British bike. How about a PEUGEOT PX-10 or a SCHWINN PARAMOUNT?
P.S. - Nothing I am posting is meant to disparage what I am sure is an excellent steel frame. It just isn't classic and I wouldn't spend that kind of money on it.
#27
Full Member
My 59 cm garishly green POS [ho ho] frame has a mishmash of Tiagra, 105, and non-Shimano. It works together pretty well.
I have to go to bed very soon, as tomorrow I have to propel this POS-et-cetera bike 140 km (which doesn't worry me) and with 2,800 metres or so of "elevation gain" (which does).
A month or so from now I hope to report on adventures with a bike that will be authentically vintage (though with anachronistic components). The frame is probably a knock-off of something else, I don't know; what does seem pretty certain about this charming relic is that its (highly regarded) builder didn't use a jig and should have done.
#29
aka: Dr. Cannondale
Join Date: Jul 2009
Posts: 7,746
Mentioned: 234 Post(s)
Tagged: 0 Thread(s)
Quoted: 2157 Post(s)
Liked 3,441 Times
in
1,214 Posts
If I was in the market for a NEW frame made by a fantastic supplier at a relatively bargain price, I'd buy a Panasonic in a heartbeat.
Really well made frames (see: Schwinn Prologue) with terrific finish.
Hard to import but doable either through Yellow Jersey or via a buddy in Japan.
Yes, one could purchase a legendary vintage frame for that amount or less, but if you gotta have new and nice...
Really well made frames (see: Schwinn Prologue) with terrific finish.
Hard to import but doable either through Yellow Jersey or via a buddy in Japan.
Yes, one could purchase a legendary vintage frame for that amount or less, but if you gotta have new and nice...
__________________
Hard at work in the Secret Underground Laboratory...
Hard at work in the Secret Underground Laboratory...
Likes For rccardr:
#30
Senior Member
Join Date: Jun 2008
Location: Louisville, KY
Posts: 13,458
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 4247 Post(s)
Liked 2,959 Times
in
1,817 Posts
It does look interesting. Just like those new classic-inspired frames from Italy. Unfortunately, I don't have the budget for a new bike and would have a hard time explaining why I "need" another.
#31
Senior Member
Join Date: Jan 2013
Location: Norman, Oklahoma
Posts: 5,394
Bikes: Too many to list
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 1765 Post(s)
Liked 1,125 Times
in
746 Posts
Would you buy a brand new classic frame?
https://cycle.panasonic.com/products..._order/frcc02/
Cost will be $1480 + $150 shipping + taxes (+ extra for painting).
https://cycle.panasonic.com/products..._order/frcc02/
Cost will be $1480 + $150 shipping + taxes (+ extra for painting).
I would seriously consider it -- in fact, i did
i looked hard at these Panasonic track frames when i had my custom built. I would have gone for it too if not for the fact that i was wanting some pretty serious custom geometry tweaks
#32
Senior Member
Evolution...Devolution...A Tale, based on one of my faves, a nice silver/gold-brown '82 Columbine Sport-Tour frameset.
I AM DEVO!!!!!!! Except when I'm not.
Also note the kissin' cousin also-fave, now-green '82 Columbine Sport-Tour. It's had a new fork built by John Murphy, to replace the non-original fork it arrived with, was then resprayed by Franklin Frames, and has never had a vintage build by my hands.
I love them both madly, regardless of build, and am completely unable to work up any agida over other folks' choices in what they buy or how they build 'em. But YMMV.
Bought in 2017
2017 Build
Columbine Road '85 - Piermont Marsh - 03 by pcb_rf, on Flickr
2018 Build
Columbine '82 Road - '18 2x Build - 01 by pcb_rf, on Flickr
2019 Build
Columbine '82 Sportif - Vintage Build - 02 by pcb_rf, on Flickr
Kissin' Cousin '82 Columbine, before 11spd update and even more "modern" stuff.
I AM DEVO!!!!!!! Except when I'm not.
Also note the kissin' cousin also-fave, now-green '82 Columbine Sport-Tour. It's had a new fork built by John Murphy, to replace the non-original fork it arrived with, was then resprayed by Franklin Frames, and has never had a vintage build by my hands.
I love them both madly, regardless of build, and am completely unable to work up any agida over other folks' choices in what they buy or how they build 'em. But YMMV.
Bought in 2017
2017 Build
Columbine Road '85 - Piermont Marsh - 03 by pcb_rf, on Flickr
2018 Build
Columbine '82 Road - '18 2x Build - 01 by pcb_rf, on Flickr
2019 Build
Columbine '82 Sportif - Vintage Build - 02 by pcb_rf, on Flickr
Kissin' Cousin '82 Columbine, before 11spd update and even more "modern" stuff.
__________________
Fuggedaboutit!
Fuggedaboutit!
#33
Senior Member
Likes For Bad Lag:
#35
Senior Member
#36
Senior Member
Join Date: Aug 2010
Location: Utah
Posts: 8,704
Bikes: Paletti,Pinarello Monviso,Duell Vienna,Giordana XL Super,Lemond Maillot Juane.& custom,PDG Paramount,Fuji Opus III,Davidson Impulse,Pashley Guv'nor,Evans,Fishlips,Y-Foil,Softride, Tetra Pro, CAAD8 Optimo,
Mentioned: 157 Post(s)
Tagged: 0 Thread(s)
Quoted: 2332 Post(s)
Liked 5,067 Times
in
1,798 Posts
One of the older POS ones has been for sale locally for awhile.
https://classifieds.ksl.com/listing/65098068
https://classifieds.ksl.com/listing/65098068
__________________
Steel is real...and comfy.
Steel is real...and comfy.
#38
Senior Member
__________________
#GCVintageBicycles for pics of C&V bikes and parts.
#GCVintageBicycles for pics of C&V bikes and parts.
#39
Senior Member
New production bikes are no longer cheap. The All City Zig Zag with 105 is $3,050. Frame is $1,550. With Ultegra the bike is $4,199. I would think that is a fair comparison.
At today's exchange rate of 114 Y/USD, the Panasonic is $2,400 for 105 and $2,800 for Ultegra. Frame is $1,300. Does not seem out of line to me at all.
At today's exchange rate of 114 Y/USD, the Panasonic is $2,400 for 105 and $2,800 for Ultegra. Frame is $1,300. Does not seem out of line to me at all.
__________________
#GCVintageBicycles for pics of C&V bikes and parts.
#GCVintageBicycles for pics of C&V bikes and parts.
Likes For Shrevvy:
#40
Senior Member
I would love to get a Panasonic frame. Have been oogling the FRCC22 and FRCC12 frames for some time now. The fact that it requires a bit of effort to order one outside of Japan, plus that everyone who's not a bike nerd will think you're riding around on an old promotion bike from the VCR era only makes me want one even more.
Likes For th0m:
#41
Senior Member
Join Date: Jan 2015
Location: Los Angeles
Posts: 4,719
Bikes: 82 Medici, 2011 Richard Sachs, 2011 Milwaukee Road
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 1957 Post(s)
Liked 2,032 Times
in
1,120 Posts
I was very close to getting a Pegoretti a few years ago. My wife wanted a trip to Italy and we made a deal. Then I did some diy plumbing and spent or vacation/bike money on repairs. And now it is too late.
So yea, I would. I considered a Panasonic once.
So yea, I would. I considered a Panasonic once.
__________________
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
#42
Bianchi Goddess
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 27,885
Bikes: Too many to list here check my signature.
Mentioned: 194 Post(s)
Tagged: 2 Thread(s)
Quoted: 2943 Post(s)
Liked 2,950 Times
in
1,504 Posts
Probably not. There are plenty of nice classic bikes out there.
That Panasonic is nice though.
That Panasonic is nice though.
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
Likes For Bianchigirll:
#43
Senior Member
the pricing is reasonable -
too bad Panasonic wont bring back PICS system back to US.
a disc version of a PR6000 would be a cool build
#44
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,654
Bikes: It's complicated.
Mentioned: 1300 Post(s)
Tagged: 0 Thread(s)
Quoted: 4690 Post(s)
Liked 5,837 Times
in
2,297 Posts
Speaking of new classic-looking frames. I'll be honest, it's all I can do not to pull the trigger on a Toussaint. A bunch of money sitting in paypal isn't helping either. I disassembled my last low-trail project and miss the handling. Both my 650b wheelsets are ~126mm spacing so that's keeping me right now. It looks like a perfect parts bike for the person who has a 650b rimbrake wheelset already. Not to mention that's pretty cheap for a modern new frame compared to the venerable cheap frame standby, CrossCheck.
https://www.cyclestoussaint.com/coll...with-braze-ons
https://www.cyclestoussaint.com/coll...with-braze-ons
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
Likes For gugie:
#45
Sunshine
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,669
Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo
Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 11025 Post(s)
Liked 7,574 Times
in
4,225 Posts
I would for sure consider a new Panasonic frame if the geometry fit what I want. Having something that almost nobody else in a country has can be neat, even if it isnt measurably better than various alternatives.
Likes For mstateglfr:
#46
Sunshine
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,669
Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo
Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 11025 Post(s)
Liked 7,574 Times
in
4,225 Posts
Likes For mstateglfr:
#47
Senior Member
Join Date: Jun 2008
Location: Louisville, KY
Posts: 13,458
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 4247 Post(s)
Liked 2,959 Times
in
1,817 Posts
#48
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,630
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3871 Post(s)
Liked 2,571 Times
in
1,579 Posts
Unfortunately, that goes for the tire clearance as well. 700x26C is the spec, if that's strict then I would definitely be out!
#49
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,114
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 269 Post(s)
Tagged: 0 Thread(s)
Quoted: 4528 Post(s)
Liked 6,424 Times
in
3,698 Posts
Looks like they tried pretty hard and failed, a bit odd considering they had a rocking paint program at that/one time?
Not that far off to me, close but no cigar.
Maybe on purpose, seems a little MTB or something, not sure if I would get on board but I think its growing on me.
Not that far off to me, close but no cigar.
Maybe on purpose, seems a little MTB or something, not sure if I would get on board but I think its growing on me.
Last edited by merziac; 10-18-21 at 12:21 PM.
#50
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,114
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 269 Post(s)
Tagged: 0 Thread(s)
Quoted: 4528 Post(s)
Liked 6,424 Times
in
3,698 Posts
Circling back just to weigh in again and we all know how we like to spend each others $$$$$.
New classic, yes.
Custom, yes, absolutely.
Worth every damn penny.
New classic, yes.
Custom, yes, absolutely.
Worth every damn penny.
Likes For merziac: