Evil's gravel bike has launched
#1
Senior Member
Thread Starter
Join Date: Jan 2010
Location: San Diego
Posts: 2,235
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 353 Post(s)
Likes: 0
Liked 92 Times
in
67 Posts
Evil's gravel bike has launched
Chamois Hagar
https://www.evil-bikes.com/a/bikes/chamois-hagar
Pretty much pure mtb geometry and reach on a gravel bike. This thing should just plow through everything offroad.
Also Gee Milner posted a build on it to coincide with the launch. That is one burly frame.
Dream Build
https://www.youtube.com/watch?v=YK7K4YkCLCs
https://www.evil-bikes.com/a/bikes/chamois-hagar
Pretty much pure mtb geometry and reach on a gravel bike. This thing should just plow through everything offroad.
Also Gee Milner posted a build on it to coincide with the launch. That is one burly frame.
Dream Build
https://www.youtube.com/watch?v=YK7K4YkCLCs
Last edited by gus6464; 12-16-19 at 01:28 PM.
#2
Sunshine
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,608
Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo
Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 10954 Post(s)
Liked 7,481 Times
in
4,184 Posts
93mm of trail
1x only
dropper post
428 A-C fork
Yup, if I were asked to draw a drop bar bike with modern MTB geometry, this would be it.
I do like having 3 bottle cages in the main triangle. 2 bottle mounts on the top of the down tube has always been an appealing option to me, moreso than the 3rd cage being down by the bottom bracket under the down tube. I get that frame bags need the space where the 2nd bottle would go in the main triangle, but for all who dont ride every day with a frame bag, its a better location for an extra bottle cage because the bottle stays cleaner and is can be accessed while riding.
1x only
dropper post
428 A-C fork
Yup, if I were asked to draw a drop bar bike with modern MTB geometry, this would be it.
I do like having 3 bottle cages in the main triangle. 2 bottle mounts on the top of the down tube has always been an appealing option to me, moreso than the 3rd cage being down by the bottom bracket under the down tube. I get that frame bags need the space where the 2nd bottle would go in the main triangle, but for all who dont ride every day with a frame bag, its a better location for an extra bottle cage because the bottle stays cleaner and is can be accessed while riding.
#6
Senior Member
Join Date: Aug 2008
Location: SF Bay Area East
Posts: 429
Bikes: Open Cycles WI.DE.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
I’d love to try one of these things out. Pretty much exactly the kind of usage I need. Good on the road for getting to the trial head. The good on the fire roads and single tracks.
#7
FLIR Kitten to 0.05C
Join Date: Sep 2014
Location: Lincoln, Nebraska
Posts: 5,331
Bikes: Roadie: Seven Axiom Race Ti w/Chorus 11s. CX/Adventure: Carver Gravel Grinder w/ Di2
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 2349 Post(s)
Liked 406 Times
in
254 Posts
One cool thing is in the build out section they let you chose different cockpit options. Multiple bar options up to 48cm.
I’d love to try one of these things out. Pretty much exactly the kind of usage I need. Good on the road for getting to the trial head. The good on the fire roads and single tracks.
I’d love to try one of these things out. Pretty much exactly the kind of usage I need. Good on the road for getting to the trial head. The good on the fire roads and single tracks.
None of the handlebars are that wide or MTB-like though. Nothing Cowchipper or woodchipper like, both the ENVE and the Easton are Cowbell like and very much on the road end....of course the same thing happens in their entire bike builder, there's basically one low-end choice and an uber ENVE high priced option and nothing in between.
#8
Senior Member
Thread Starter
Join Date: Jan 2010
Location: San Diego
Posts: 2,235
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 353 Post(s)
Likes: 0
Liked 92 Times
in
67 Posts
Buy the frame and build it out however you like it. Although frame only builds are not as big of a value proposition vs mtb where there's more competition in drivetrains and brakes.
#9
Senior Member
Hope their next bike is a Diamond Dave.
Likes For CarloM:
#10
Senior Member
Join Date: Apr 2018
Posts: 659
Bikes: Norco search xr
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 198 Post(s)
Liked 146 Times
in
90 Posts
From the website....
NOEVERLAP
One of the most heinous road traits is toe overlap—turning the front wheel and demolishing your feet. The Chamois Hagar’s Evil-approved front center GUARANTEES Noeverlap—No toe Overlap. How can we GUARANTEE IT? With a 66.8 headtube angle, you WILL NOT hit your feet when you turn the bars. You are now free to turn like you enjoy ridingCUSTOM FORK
Forks designed around 66.8-degree headtubes, 50mm stems, and real reach? Not so much, so we made our own. It’s big, smooth, and predictable with a 57mm offset and a 428mm axle-to-crown
#11
Senior Member
Join Date: Oct 2018
Location: VA
Posts: 1,437
Bikes: SuperSix Evo | Revolt
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 733 Post(s)
Liked 815 Times
in
414 Posts
From the website....
NOEVERLAP
One of the most heinous road traits is toe overlap—turning the front wheel and demolishing your feet. The Chamois Hagar’s Evil-approved front center GUARANTEES Noeverlap—No toe Overlap. How can we GUARANTEE IT? With a 66.8 headtube angle, you WILL NOT hit your feet when you turn the bars. You are now free to turn like you enjoy ridingCUSTOM FORK
Forks designed around 66.8-degree headtubes, 50mm stems, and real reach? Not so much, so we made our own. It’s big, smooth, and predictable with a 57mm offset and a 428mm axle-to-crown
Likes For HarborBandS:
#13
HarborBandS
Join Date: Jun 2018
Location: Chicago Western Suburbs
Posts: 477
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 266 Post(s)
Liked 104 Times
in
57 Posts
I know they make some of the highest regarded mtb bikes out there, but all of the EVIL marketing leaves me cold. I guess I'm too old.
#14
Senior Member
I have pretty bad tow overlap on my CX bike but it is somewhat my fault since I have my cleats pushed all the way back towards my heals. Don't really notice it in my road setup with 28mm tires but I do have to watch it running 40s.
Not sure who the market is for this bike but is looks cool.
Not sure who the market is for this bike but is looks cool.
#15
Senior Member
Join Date: Oct 2018
Location: VA
Posts: 1,437
Bikes: SuperSix Evo | Revolt
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 733 Post(s)
Liked 815 Times
in
414 Posts
I've had it on my last two road bikes, and it's annoying. Next road bike will not have it, found one with the geo I've been looking for.
#16
Full Member
Zero overlap on my Niner RDO RLT9, and the head angle is not slack like that Evil. At that price I could buy a carbon Niner and put Di2 on it and still have money in the bank.
#17
Senior Member
Join Date: Sep 2011
Posts: 4,764
Mentioned: 28 Post(s)
Tagged: 0 Thread(s)
Quoted: 1975 Post(s)
Liked 232 Times
in
173 Posts
Since I ride 49-50cm frames I always have toe overlap, not really an issue even on tight cyclocross courses. Certainly wouldn't want to sacrifice snappy handling with such a slack geometry
#18
Senior Member
93mm of trail
1x only
dropper post
428 A-C fork
Yup, if I were asked to draw a drop bar bike with modern MTB geometry, this would be it.
I do like having 3 bottle cages in the main triangle. 2 bottle mounts on the top of the down tube has always been an appealing option to me, moreso than the 3rd cage being down by the bottom bracket under the down tube. I get that frame bags need the space where the 2nd bottle would go in the main triangle, but for all who dont ride every day with a frame bag, its a better location for an extra bottle cage because the bottle stays cleaner and is can be accessed while riding.
1x only
dropper post
428 A-C fork
Yup, if I were asked to draw a drop bar bike with modern MTB geometry, this would be it.
I do like having 3 bottle cages in the main triangle. 2 bottle mounts on the top of the down tube has always been an appealing option to me, moreso than the 3rd cage being down by the bottom bracket under the down tube. I get that frame bags need the space where the 2nd bottle would go in the main triangle, but for all who dont ride every day with a frame bag, its a better location for an extra bottle cage because the bottle stays cleaner and is can be accessed while riding.
I had been attracted to the low BB, but guess I'll go back to pondering a Specialized Diverge for N+1
#19
Sunshine
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,608
Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo
Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 10954 Post(s)
Liked 7,481 Times
in
4,184 Posts
NOT 1x only (see feature 05 on their page) However after some more reading, a 2x setup limits you to a 40mm tire? Not really that great when other companies fit 45-50mm AND both derailleurs...
I had been attracted to the low BB, but guess I'll go back to pondering a Specialized Diverge for N+1
I had been attracted to the low BB, but guess I'll go back to pondering a Specialized Diverge for N+1
thata some real limiting tire width for 2x.
#20
Senior Member
Thread Starter
Join Date: Jan 2010
Location: San Diego
Posts: 2,235
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 353 Post(s)
Likes: 0
Liked 92 Times
in
67 Posts
I'm always fascinated when everyone on here say that slack bikes will not have snappy handling. No one ever complains that a mountain bike doesn't have snappy handling and yet the modern ones are slacker and longer and even snappier than the old school ones. Mtbs need to turn on a dime or you can end up planted on a tree or bush. Road and gravel bikes don't require this.
You offset long reach and slacker headtube with a short stem which is what all modern long and slack bikes are designed for. On modern mtbs if you have to use a stem longer than 50mm you size up. Even xc bikes are becoming this way.
This evil was designed as an off-road first and road second kind of gravel bike while most other ones out there are designed to be the opposite. If you are the kind of gravel rider that wants to spend more time on the dirt vs asphalt then this might just be the bike for you.
You offset long reach and slacker headtube with a short stem which is what all modern long and slack bikes are designed for. On modern mtbs if you have to use a stem longer than 50mm you size up. Even xc bikes are becoming this way.
This evil was designed as an off-road first and road second kind of gravel bike while most other ones out there are designed to be the opposite. If you are the kind of gravel rider that wants to spend more time on the dirt vs asphalt then this might just be the bike for you.
#21
Sunshine
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,608
Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo
Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 10954 Post(s)
Liked 7,481 Times
in
4,184 Posts
I'm always fascinated when everyone on here say that slack bikes will not have snappy handling. No one ever complains that a mountain bike doesn't have snappy handling and yet the modern ones are slacker and longer and even snappier than the old school ones. Mtbs need to turn on a dime or you can end up planted on a tree or bush. Road and gravel bikes don't require this.
You offset long reach and slacker headtube with a short stem which is what all modern long and slack bikes are designed for. On modern mtbs if you have to use a stem longer than 50mm you size up. Even xc bikes are becoming this way.
This evil was designed as an off-road first and road second kind of gravel bike while most other ones out there are designed to be the opposite. If you are the kind of gravel rider that wants to spend more time on the dirt vs asphalt then this might just be the bike for you.
You offset long reach and slacker headtube with a short stem which is what all modern long and slack bikes are designed for. On modern mtbs if you have to use a stem longer than 50mm you size up. Even xc bikes are becoming this way.
This evil was designed as an off-road first and road second kind of gravel bike while most other ones out there are designed to be the opposite. If you are the kind of gravel rider that wants to spend more time on the dirt vs asphalt then this might just be the bike for you.
My gravel bike has a 72.5degree head tube with 50mm fork rake and 46mm handlebar width rolling on 43mm tires. The trail is 56-60mm.
I will say that my MTB does not have snappy handling. Most of the MTB around me is flat and twisty river bottom trails. Its like I am trying to navigate an Abrams tank compared to when I ride the same trails with my gravel bike.
This Evil would have 94mm of trail if 50mm tires were used, and that would basically be between my MTB and gravel bike. I could see it being an interesting option for many who dont want/need an MTB bike, but still want to ride some dirt(vs gravel roads).
#22
Senior Member
Join Date: Apr 2018
Posts: 659
Bikes: Norco search xr
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 198 Post(s)
Liked 146 Times
in
90 Posts
I love the 67.5 degree head angle on my mountain bike, and think I would like this 66.8 on the evil as well. I also like that it would cure the toe overlap that I have on my gravel and road bikes. I would like to buy the frame and transfer parts, but it is way to expensive. I'll have to wait for someone else on down the road to have an inexpensive one later perhaps. I would also like it in steel.
#23
Senior Member
Thread Starter
Join Date: Jan 2010
Location: San Diego
Posts: 2,235
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 353 Post(s)
Likes: 0
Liked 92 Times
in
67 Posts
I love the 67.5 degree head angle on my mountain bike, and think I would like this 66.8 on the evil as well. I also like that it would cure the toe overlap that I have on my gravel and road bikes. I would like to buy the frame and transfer parts, but it is way to expensive. I'll have to wait for someone else on down the road to have an inexpensive one later perhaps. I would also like it in steel.
Likes For gus6464:
#24
Member
I've never felt the need or desire for a dropper post on my gravel bike. Does anyone find it helpful?
#25
Senior Member
Join Date: Oct 2015
Location: San Diego, California
Posts: 4,077
Bikes: Velo Orange Piolet
Mentioned: 28 Post(s)
Tagged: 0 Thread(s)
Quoted: 2228 Post(s)
Liked 2,011 Times
in
972 Posts
This is a new sub-category, the down-hill gravel bike. Since there are various categories of mountain bike, it's only fair that there be multiple categories of gravel bike.