advice on dropper post for my Yukon 2
12-26-20, 03:33 PM
#1
Junior Member
Thread Starter
Join Date: Jan 2007
Location: Youngstown, Ohio
Posts: 174
Bikes: Giant OCR 3, Kubachi, Trek 820, Iron Horse Trail, 74 Schwinn LeTour, 95 Schwinn LeTour, Ross Euro Tour, Miayata
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
advice on dropper post for my Yukon 2
Looking for recommendation on a dropper post for my 2020 Yukon 2?
It doesn't look like my frame is drilled for internal dropper at least I can't see where the cable would go thru frame. If anyone has installed on their Yukon please let me know what brand you went with. I measured and subtracted 50 mm and got 102mm as length.
Thanks Wardie
It doesn't look like my frame is drilled for internal dropper at least I can't see where the cable would go thru frame. If anyone has installed on their Yukon please let me know what brand you went with. I measured and subtracted 50 mm and got 102mm as length.
Thanks Wardie
12-29-20, 04:52 PM
#2
Junior Member
Thread Starter
Join Date: Jan 2007
Location: Youngstown, Ohio
Posts: 174
Bikes: Giant OCR 3, Kubachi, Trek 820, Iron Horse Trail, 74 Schwinn LeTour, 95 Schwinn LeTour, Ross Euro Tour, Miayata
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
geez I was really looking for some suggestions on a dropper post?
12-29-20, 07:10 PM
#3
Senior Member
Any externally routed post will work.
I wouldn't recommend drilling a hole, but it can be done.
You need to know the diameter and dropper manufacturers have sizing charts.
I used to have an external PNW Cascade, which was fine for 3 years.
I wouldn't recommend drilling a hole, but it can be done.
You need to know the diameter and dropper manufacturers have sizing charts.
I used to have an external PNW Cascade, which was fine for 3 years.
Likes For HerrKaLeun:
12-31-20, 05:46 PM
#4
Advanced Slacker
Join Date: Feb 2017
Posts: 6,210
Bikes: Soma Fog Cutter, Surly Wednesday, Canfielld Tilt
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 2762 Post(s)
Liked 2,537 Times
in
1,433 Posts
I also have a PNW Cascade. Two winters, still good.
01-01-21, 02:09 PM
#5
Junior Member
Thread Starter
Join Date: Jan 2007
Location: Youngstown, Ohio
Posts: 174
Bikes: Giant OCR 3, Kubachi, Trek 820, Iron Horse Trail, 74 Schwinn LeTour, 95 Schwinn LeTour, Ross Euro Tour, Miayata
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
from the seat post collar to the middle of seat rails is like 5 1/2"
site says subtract 50 mm makes the post height 102 mm evey post I see is at least 125 mm am I dong something wrong?i
site says subtract 50 mm makes the post height 102 mm evey post I see is at least 125 mm am I dong something wrong?i
01-01-21, 03:44 PM
#6
Advanced Slacker
Join Date: Feb 2017
Posts: 6,210
Bikes: Soma Fog Cutter, Surly Wednesday, Canfielld Tilt
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 2762 Post(s)
Liked 2,537 Times
in
1,433 Posts
01-02-21, 04:54 PM
#7
Randomhead
Join Date: Aug 2008
Location: Happy Valley, Pennsylvania
Posts: 24,398
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 3,697 Times
in
2,518 Posts
There are lots of 100mm dropper posts
You might need an 80 though
You might need an 80 though
