Go Back  Bike Forums > Bike Forums > Classic & Vintage
Reload this Page >

Updating wheels on an Ironman?

Notices
Classic & Vintage This forum is to discuss the many aspects of classic and vintage bicycles, including musclebikes, lightweights, middleweights, hi-wheelers, bone-shakers, safety bikes and much more.

Updating wheels on an Ironman?

Old 03-29-20, 01:23 AM
  #1  
N2motorsports
Senior Member
Thread Starter
 
Join Date: Mar 2020
Posts: 58
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 35 Post(s)
Liked 47 Times in 16 Posts
Updating wheels on an Ironman?

Hi everyone, hoping a few of you patient members would help clarify how I can fit new style clincher wheels onto an ironman. I've read various posts and with all the different ways of describing hubs, cassettes, flywheels, indexing, friction, re-dishing...I'm a bit overwhelmed.
From what I researched I can coldset frame to accept the wider wheels but that my ironman may already be at 128mm so I could just force them in. Done.
Here's where I'm stuck, since my ironman probably has a freewheel vs the newer freehub, I should

Option 1. Buy 7 sprocket cassette, add 4.5mm spacer. Will the existing derailleur & shifter be compatible?
Option 2. Use the existing 10 speed cassette. If I do this, I assume a newer derailleur and shifter will need to be purchased?
Lastly, will wheels need to be re-dish regardless of either options. Is this because more weight has shifted to the drivetrain side?
Thanks
N2motorsports is offline  
Old 03-29-20, 03:58 AM
  #2  
Bianchigirll 
Bianchi Goddess
 
Bianchigirll's Avatar
 
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 29,724

Bikes: Too many to list here check my signature.

Mentioned: 191 Post(s)
Tagged: 2 Thread(s)
Quoted: 2912 Post(s)
Liked 2,836 Times in 1,460 Posts
Originally Posted by N2motorsports
Hi everyone, hoping a few of you patient members would help clarify how I can fit new style clincher wheels onto an ironman. I've read various posts and with all the different ways of describing hubs, cassettes, flywheels, indexing, friction, re-dishing...I'm a bit overwhelmed.
From what I researched I can coldset frame to accept the wider wheels but that my ironman may already be at 128mm so I could just force them in. Done.
Here's where I'm stuck, since my ironman probably has a freewheel vs the newer freehub, I should

What year and model Ironman? What components are currently on it? Why are we changing the wheels?

Option 1. Buy 7 sprocket cassette, add 4.5mm spacer. Will the existing derailleur & shifter be compatible? If your bike already has 7spd index shifting this is the simplest way to go, I've done this on a bike or two albeit with friction shifting and it worked well.


Option 2. Use the existing 10 speed cassette. If I do this, I assume a newer derailleur and shifter will need to be purchased?
Lastly, will wheels need to be re-dish regardless of either options. Is this because more weight has shifted to the drivetrain side? Depending on how your bike is set up and you don't mind friction shifting your current deraileur and shifter may handle the 10sp cassette, if you want to stay with index then yes you need a new set of shifters and rear derailleur. If you're buying off the shelf wheels they should not need to be redished for any reason unless you change the axle.

Thanks

Good morning and welcome to the forums!! Any pics so we know more about the model of your Ironman?
__________________
One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"

Sugar "Kane" Kowalczyk
Bianchigirll is offline  
Old 03-29-20, 06:08 AM
  #3  
Classtime 
Senior Member
 
Classtime's Avatar
 
Join Date: Jan 2015
Location: Los Angeles
Posts: 4,674

Bikes: 82 Medici, 2011 Richard Sachs, 2011 Milwaukee Road

Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 1924 Post(s)
Liked 1,954 Times in 1,086 Posts
The Ironman is a great platform.

Here is a thread specific to The Ironman. Some have been updated.
https://www.bikeforums.net/classic-v...aint-jobs.html

Here is a thread with plenty of bikes brought up to 10 speed.
https://www.bikeforums.net/classic-v...i-s-ergos.html
__________________
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
Classtime is offline  
Old 03-29-20, 08:44 AM
  #4  
rccardr 
aka: Dr. Cannondale
 
rccardr's Avatar
 
Join Date: Jul 2009
Posts: 7,852
Mentioned: 234 Post(s)
Tagged: 0 Thread(s)
Quoted: 2151 Post(s)
Liked 3,380 Times in 1,198 Posts
Cheapest way to do this is to buy an 8-9-10 speed 130 width wheelset, an 8-9-10 speed cassette with max cog size of 28, and an appropriate chain for the number of speeds. Assuming this is a Shimano equipped Ironman, set the shifters to friction and have at it. All of those Shimano components are compatible and work well with 8-9-10 speed setups.

If you want indexing, purchase a set of downtube shifters in the same number of speeds as the cassette and chain.

If you want to go to STI's, then likely you will need a later FD as well since the 105/600 ones found on 80's Ironman bikes were not intended to run indexed (note: this MIGHT work, and would be worth at least trying).

If you have a later Ironman with non-Shimano components, perhaps others here can give you advice on how to upgrade it.
__________________
Hard at work in the Secret Underground Laboratory...
rccardr is offline  
Old 03-29-20, 10:35 AM
  #5  
ramzilla
Senior Member
 
ramzilla's Avatar
 
Join Date: Dec 2014
Location: Fernandina Beach FL
Posts: 3,605

Bikes: Vintage Japanese Bicycles, Tange, Ishiwata, Kuwahara

Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 700 Post(s)
Liked 321 Times in 251 Posts
I put a set of new Vuelta XRP 130mm racing wheels on this 1987 Ironman. I put a 7 speed freewheel with a spoke protector spacer & a set of cheapie 2X7 Microshift brifters on it. Dropped it's weight down to about 21-1/2 lbs. Rides like a dream.


edit: Also upgraded to a 9 speed Shimano Deore M-591 RD and, extended range 32 tooth Sram cog set.

Last edited by ramzilla; 03-29-20 at 10:39 AM.
ramzilla is offline  
Likes For ramzilla:
Old 03-29-20, 04:52 PM
  #6  
N2motorsports
Senior Member
Thread Starter
 
Join Date: Mar 2020
Posts: 58
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 35 Post(s)
Liked 47 Times in 16 Posts
Originally Posted by Bianchigirll
Good morning and welcome to the forums!! Any pics so we know more about the model of your Ironman?
this makes it post #8 , so pics coming!
N2motorsports is offline  
Old 03-29-20, 05:22 PM
  #7  
RobbieTunes
Banned.
 
Join Date: Dec 2007
Posts: 27,297
Mentioned: 34 Post(s)
Tagged: 1 Thread(s)
Quoted: 378 Post(s)
Liked 1,407 Times in 908 Posts
Act now and get 2 for the price of 1!!!!

Not really.

There are a couple of significant Ironman threads here. Tons of options. All good.

SInce you have 10sp wheels and a cassette, simple to pick up any 10sp Shimano RD and a set of 10sp fiwntube shifters. Then ride it like you stole it.
RobbieTunes is offline  
Old 03-29-20, 05:31 PM
  #8  
N2motorsports
Senior Member
Thread Starter
 
Join Date: Mar 2020
Posts: 58
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 35 Post(s)
Liked 47 Times in 16 Posts
Originally Posted by rccardr
Cheapest way to do this is to buy an 8-9-10 speed 130 width wheelset, an 8-9-10 speed cassette with max cog size of 28, and an appropriate chain for the number of speeds. Assuming this is a Shimano equipped Ironman, set the shifters to friction and have at it. All of those Shimano components are compatible and work well with 8-9-10 speed setups.
Just picked up a set of rolf prima elan aero, 130mm 10 speed. It was fairly easy to muscle it in but the chain was too thick? Couldnt tell if RD will work until I swap a chain?
N2motorsports is offline  
Old 03-29-20, 05:36 PM
  #9  
N2motorsports
Senior Member
Thread Starter
 
Join Date: Mar 2020
Posts: 58
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 35 Post(s)
Liked 47 Times in 16 Posts
Originally Posted by RobbieTunes
Not really.

There are a couple of significant Ironman threads here. Tons of options. All good.

SInce you have 10sp wheels and a cassette, simple to pick up any 10sp Shimano RD and a set of 10sp fiwntube shifters. Then ride it like you stole it.
thank you kind human. Back to the chain thing, so I see there are different widths of chains, Ill get one compatible with a 10. So, over thinking it, will the narrower chains work on front rings now?
N2motorsports is offline  
Old 03-29-20, 05:40 PM
  #10  
N2motorsports
Senior Member
Thread Starter
 
Join Date: Mar 2020
Posts: 58
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 35 Post(s)
Liked 47 Times in 16 Posts
I'm official! Pictures...

last pic are the problem child wheels



N2motorsports is offline  
Old 03-29-20, 06:57 PM
  #11  
mstateglfr 
Sunshine
 
mstateglfr's Avatar
 
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,538

Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo

Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 10902 Post(s)
Liked 7,393 Times in 4,148 Posts
Originally Posted by N2motorsports
So, over thinking it, will the narrower chains work on front rings now?
It isnt officially recommended.
But in practice, it works. I've done 9sp chains with rings that were originally for 6 and 7sp drivetrains. Works fine. The lack of ramps on the rings makes shifting not as fast as modern, but the chains work fine.
mstateglfr is offline  
Old 03-29-20, 07:11 PM
  #12  
RobbieTunes
Banned.
 
Join Date: Dec 2007
Posts: 27,297
Mentioned: 34 Post(s)
Tagged: 1 Thread(s)
Quoted: 378 Post(s)
Liked 1,407 Times in 908 Posts
Originally Posted by N2motorsports
I'm official! Pictures...

last pic are the problem child wheels



Bontragers?
RobbieTunes is offline  
Old 03-29-20, 07:22 PM
  #13  
N2motorsports
Senior Member
Thread Starter
 
Join Date: Mar 2020
Posts: 58
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 35 Post(s)
Liked 47 Times in 16 Posts
rolf prima elan aero

suppose to be good for hills and boy do we have lots of them here
N2motorsports is offline  
Old 03-29-20, 07:44 PM
  #14  
attylah
Full Member
 
Join Date: Apr 2013
Location: Keizer. OR
Posts: 294
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 80 Post(s)
Liked 274 Times in 110 Posts
I bought mine as a frame, had the rear cold set to 130mm, and built it up with 9 speed Dura Ace. Works flawlessly and rides like a dream.


attylah is offline  
Old 03-29-20, 08:04 PM
  #15  
N2motorsports
Senior Member
Thread Starter
 
Join Date: Mar 2020
Posts: 58
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 35 Post(s)
Liked 47 Times in 16 Posts
Originally Posted by attylah
I bought mine as a frame, had the rear cold set to 130mm, and built it up with 9 speed Dura Ace. Works flawlessly and rides like a dream.


very nice. Ever weigh her?
N2motorsports is offline  
Old 03-29-20, 08:35 PM
  #16  
RobbieTunes
Banned.
 
Join Date: Dec 2007
Posts: 27,297
Mentioned: 34 Post(s)
Tagged: 1 Thread(s)
Quoted: 378 Post(s)
Liked 1,407 Times in 908 Posts
Originally Posted by N2motorsports
rolf prima elan aero

suppose to be good for hills and boy do we have lots of them here
Worth building a bike around, that's for sure.10sp downtube shifters and a lighter crankset/BB combo, a good 3 lbs off that bike.

Given the hills and black wheels, a Shimano 105 (5600 or 5700) long cage RD along with about a 12-32 cassette will climb. Pair it with a compact crankset and you've got a climber plus.

Sky's the limit.
RobbieTunes is offline  
Old 03-30-20, 10:44 AM
  #17  
attylah
Full Member
 
Join Date: Apr 2013
Location: Keizer. OR
Posts: 294
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 80 Post(s)
Liked 274 Times in 110 Posts
Originally Posted by N2motorsports
very nice. Ever weigh her?
I had never weighed it, but you got me curious. It comes in at 20.2 lbs.
attylah is offline  
Likes For attylah:
Old 03-30-20, 12:55 PM
  #18  
beicster 
Senior Member
 
Join Date: Jan 2017
Location: Berea, KY
Posts: 1,132
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 360 Post(s)
Liked 310 Times in 183 Posts
You should get a new chain anyway since you put a new cassette on it. No need to wear that out prematurely.
__________________
Andy
beicster is offline  
Old 03-30-20, 08:56 PM
  #19  
ramzilla
Senior Member
 
ramzilla's Avatar
 
Join Date: Dec 2014
Location: Fernandina Beach FL
Posts: 3,605

Bikes: Vintage Japanese Bicycles, Tange, Ishiwata, Kuwahara

Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 700 Post(s)
Liked 321 Times in 251 Posts
This one is all original. Completely restored w/new tires & everything.
ramzilla is offline  
Old 03-30-20, 09:58 PM
  #20  
N2motorsports
Senior Member
Thread Starter
 
Join Date: Mar 2020
Posts: 58
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 35 Post(s)
Liked 47 Times in 16 Posts
Originally Posted by attylah
I had never weighed it, but you got me curious. It comes in at 20.2 lbs.
that light and yours look like a 62cm
N2motorsports is offline  
Old 03-30-20, 10:00 PM
  #21  
N2motorsports
Senior Member
Thread Starter
 
Join Date: Mar 2020
Posts: 58
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 35 Post(s)
Liked 47 Times in 16 Posts
Originally Posted by ramzilla
This one is all original. Completely restored w/new tires & everything.
the white seat and handlebar really works on this bike. Easily my favorite colorway, but I'm bias
N2motorsports is offline  
Old 03-31-20, 08:29 AM
  #22  
ramzilla
Senior Member
 
ramzilla's Avatar
 
Join Date: Dec 2014
Location: Fernandina Beach FL
Posts: 3,605

Bikes: Vintage Japanese Bicycles, Tange, Ishiwata, Kuwahara

Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 700 Post(s)
Liked 321 Times in 251 Posts
This is what it looked like to begin with.
ramzilla is offline  
Old 03-31-20, 08:36 AM
  #23  
ramzilla
Senior Member
 
ramzilla's Avatar
 
Join Date: Dec 2014
Location: Fernandina Beach FL
Posts: 3,605

Bikes: Vintage Japanese Bicycles, Tange, Ishiwata, Kuwahara

Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 700 Post(s)
Liked 321 Times in 251 Posts
what it looks like now.


​​​​
ramzilla is offline  
Likes For ramzilla:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.