Go Back  Bike Forums > Bike Forums > Touring
Reload this Page >

Aero bar arm pads for velo orange crazy bars

Touring Have a dream to ride a bike across your state, across the country, or around the world? Self-contained or fully supported? Trade ideas, adventures, and more in our bicycle touring forum.

Aero bar arm pads for velo orange crazy bars

Old 02-01-19, 11:02 PM
  #1  
Leatherfeathers
Junior Member
Thread Starter
 
Join Date: May 2017
Posts: 18
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Aero bar arm pads for velo orange crazy bars

The title says most of it but here are the details. I got these bars

https://velo-orange.com/products/crazy-bars

I got them because I really like the idea of flat bars (swept in this case) with uprights that aren't bar ends. I grew up with bmx and mountain bikes so I'm really comfortable with straight bars and I ran bullhorns for a long time on many different single speed bikes and loved them. I've been trying to figure out a combination of the two and I really like the way these have done just that. I now have an idea that having aero bar pads would be cool for hunkering down on long flats, climbs, and decents with the flats for more technical secrions. I already have the aero section built in but I'm trying to find a solution for having just pads.

The problem is that I need to clamp them to to the uprights since there is no room on the outside of the before they sweep backward. I feel like there has to be something that'll work but I'm having a hard time.

Also, I don't post on here much so I'm sorry if this is the wrong forum for this. Any help would be greatly appreciated. Thanks
Leatherfeathers is offline  
Old 02-02-19, 04:54 PM
  #2  
fietsbob 
coprolite
 
fietsbob's Avatar
 
Join Date: Jun 2010
Location: NW,Oregon Coast
Posts: 41,928

Bikes: 8

Mentioned: 188 Post(s)
Tagged: 0 Thread(s)
Quoted: 6832 Post(s)
Likes: 0
Liked 211 Times in 176 Posts
center cross bar looks quite useful to put the aero bar set on... forget the "uprights" (whatever you meant about that) just go with the crossbar..


I'm trying to find a solution for having just pads.
​​​​​​​keep trying..
fietsbob is offline  
Old 02-03-19, 01:00 AM
  #3  
Happy Feet
Senior Member
 
Happy Feet's Avatar
 
Join Date: Sep 2015
Posts: 3,218
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 1209 Post(s)
Liked 102 Times in 62 Posts
These aero bars have elbow pads that are removable and clamp to the bar horizontally like on a flat bar. If you can make space there they are a $20 solution.

https://www.ebay.com/p/Road-Bike-Aer...MTB/6021279958
Happy Feet is offline  
Old 02-03-19, 01:37 PM
  #4  
boomhauer
Senior Member
 
boomhauer's Avatar
 
Join Date: Apr 2011
Posts: 655
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 164 Post(s)
Liked 3 Times in 1 Post
Originally Posted by Happy Feet View Post
These aero bars have elbow pads that are removable and clamp to the bar horizontally like on a flat bar. If you can make space there they are a $20 solution.

https://www.ebay.com/p/Road-Bike-Aer...MTB/6021279958
I would love these to work on my Jones Bar but I think I would have the same problem as the OP. The clamps won't attach. These are slip on clamps and not two-piece.

I've been looking around the internets for the same thing the OP wants. Some clamps that hold the pads. It has to be a two-piece design.

Last edited by boomhauer; 02-03-19 at 01:40 PM.
boomhauer is offline  
Old 02-04-19, 12:32 AM
  #5  
Leatherfeathers
Junior Member
Thread Starter
 
Join Date: May 2017
Posts: 18
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
​https://www.thinglink.com/scene/498130131382960128?buttonSource=viewLimits

I found this for the Jones bar application. Having a hard time finding those aero bars. I would also need shims since the tops of the crazy bar are 22.2 diameter though I would rather not. I guess the only theoretical way would be to use shims on the tops.

Last edited by Leatherfeathers; 02-04-19 at 12:38 AM.
Leatherfeathers is offline  
Old 02-04-19, 01:39 PM
  #6  
fietsbob 
coprolite
 
fietsbob's Avatar
 
Join Date: Jun 2010
Location: NW,Oregon Coast
Posts: 41,928

Bikes: 8

Mentioned: 188 Post(s)
Tagged: 0 Thread(s)
Quoted: 6832 Post(s)
Likes: 0
Liked 211 Times in 176 Posts
Machined shims work very well ..
fietsbob is offline  
Old 02-06-19, 07:51 PM
  #7  
veganbikes
Clark W. Griswold
 
Join Date: Mar 2014
Location: ,location, location
Posts: 5,227

Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Pink Klein MTB, Phil Wood VeloXS Frame (w/DA 7400), Cilo Road Frame, Proteus frame

Mentioned: 28 Post(s)
Tagged: 0 Thread(s)
Quoted: 1177 Post(s)
Liked 41 Times in 29 Posts
I use my GC-1 grips, granted the bike the bars are on is not for me so size is way off but for the short rides I have done in that position it was fairly comfortable. You could try getting some thing like a set of Garmin mounts and cut some foam pads and put them on some plexiglass or something and then mount those backwards on the non-sweptback portion of the bars and they could be removeable.
veganbikes is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mattotoole
Southeast
0
10-22-09 12:27 AM
smoothisfast
Electronics, Lighting, & Gadgets
1
09-01-09 09:41 PM
eskimo85
Road Cycling
28
02-06-06 08:37 PM
DnvrFox
Training & Nutrition
3
11-30-05 04:29 PM
G-Unit
Training & Nutrition
6
08-01-05 12:33 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.