Help with tapered steerer tube
#1
hello
Thread Starter
Help with tapered steerer tube
First time dealing with a tapered steerer tube so please bear with me.
I want to swap out my crappy Suntour suspension fork for a rigid, suspension corrected mtb fork with a tapered steerer which I plan on ordering soon. Tapered steerer tubes are supposed to measure 1.5” at the crown but the tube on my fork is 40mm or about 1-9/16” wide, which is a tad wider than 1.5”.
Is this the standard?
I want to swap out my crappy Suntour suspension fork for a rigid, suspension corrected mtb fork with a tapered steerer which I plan on ordering soon. Tapered steerer tubes are supposed to measure 1.5” at the crown but the tube on my fork is 40mm or about 1-9/16” wide, which is a tad wider than 1.5”.
Is this the standard?
#2
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,099
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4211 Post(s)
Liked 3,881 Times
in
2,316 Posts
generally the crown race seat has a slightly larger diameter then the rest of the steerer right above the seat.
Cane Creek's headset dimensional specs pages shows the 1.5" fork crown race seat to need a 39.75-39.85mm diameter. headset-identification-and-specification-guide.pdf (canecreek.com) Andy
Cane Creek's headset dimensional specs pages shows the 1.5" fork crown race seat to need a 39.75-39.85mm diameter. headset-identification-and-specification-guide.pdf (canecreek.com) Andy
__________________
AndrewRStewart
AndrewRStewart
Likes For Andrew R Stewart:
#3
Senior Member
Join Date: Apr 2016
Posts: 1,242
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 504 Post(s)
Liked 437 Times
in
336 Posts
First time dealing with a tapered steerer tube so please bear with me.
I want to swap out my crappy Suntour suspension fork for a rigid, suspension corrected mtb fork with a tapered steerer which I plan on ordering soon. Tapered steerer tubes are supposed to measure 1.5” at the crown but the tube on my fork is 40mm or about 1-9/16” wide, which is a tad wider than 1.5”.
Is this the standard?
I want to swap out my crappy Suntour suspension fork for a rigid, suspension corrected mtb fork with a tapered steerer which I plan on ordering soon. Tapered steerer tubes are supposed to measure 1.5” at the crown but the tube on my fork is 40mm or about 1-9/16” wide, which is a tad wider than 1.5”.
Is this the standard?
Likes For grumpus:
#4
hello
Thread Starter
Awesome, thank you!
So the crown race I pulled out of this fork should press fit most any 1.5” steerer …. .?
So the crown race I pulled out of this fork should press fit most any 1.5” steerer …. .?
Likes For grumpus:
#6
Clark W. Griswold
Join Date: Mar 2014
Location: ,location, location
Posts: 13,551
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 4361 Post(s)
Liked 4,002 Times
in
2,671 Posts
There are zero oddballs in cycling. Nobody has even done anything proprietary and weird ever. Everything fits together perfectly all the time with zero issue ever. I don't know what you are talking about
Likes For veganbikes: