Cleaning sticker goo off frame
#1
Member
Thread Starter
Join Date: Nov 2005
Location: New Brunswick, NJ
Posts: 44
Bikes: 80s Schwinn World something conversion
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Cleaning sticker goo off frame
I have an old frame I've been building up. The other day I peeled some old sticker off and it left some super sticky goo on the bike. Now it's getting dirt and stuff stuck to it. What should I use to get this off? Tried various soaps around the house and nothing worked. Want something strong enough to take it off without hurting the finish. Thanks, Jarrett
#3
Ferrous wheel
Join Date: Apr 2005
Location: New Orleans
Posts: 1,388
Bikes: 2004 Gunnar Rock Hound MTB; 1988 Gitane Team Pro road bike; 1986-ish Raleigh USA Grand Prix; mid-'80s Univega Gran Tourismo with Xtracycle Free Radical
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
WD-40 and a soft rag.
#4
Senior Member
Join Date: Feb 2004
Location: The Poconos, PA
Posts: 1,002
Bikes: Converted 1997 Trek Singletrack 930 singlespeed and a Kona Lavadome singlespeed, fixed Dahon folding bike, fixed 27" Miyata road bike, early 70's Raleigh Chopper
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Lighter fluid or GooGone Works wonders for sticker residue.
#5
Senior Member
#7
Dances a jig.
Join Date: Sep 2005
Location: Central, Ok
Posts: 402
Bikes: 2007 Surly Long Haul Trucker 54cm (Commuting/Wanna' go tour so bad), 1985 Trek 670 21" (Road), 2003 Gary Fisher Tassajara 17" (MTB), Cannondale DeltaV 600 (commuterized MTB), some junker bikes in my garage
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I would be extra careful using solvents on paint/clearcoat though. If your frame is powder coated, you probably don't have any worries. Either way, test the solvent first on an inconspicuous area of the frame (back of dropout, underside of chain stay, ect).
I say try Goo-Gone. I have never noted its effects on paint, but it does a fine job of removing sticker residue.
I say try Goo-Gone. I have never noted its effects on paint, but it does a fine job of removing sticker residue.
#8
Senior Member
Join Date: Sep 2005
Location: Columbus, OH
Posts: 127
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Goof off also works, that's what I use.
I believe that rubbing alcohol also works for sticker residue.. but I could be wrong.
I believe that rubbing alcohol also works for sticker residue.. but I could be wrong.
#9
Guest
Join Date: Aug 2004
Posts: 3,242
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by thenathanator
Goof off also works, that's what I use.
I believe that rubbing alcohol also works for sticker residue.. but I could be wrong.
I believe that rubbing alcohol also works for sticker residue.. but I could be wrong.
YOU are correct!!!!!!!!!!!!!!!!!!!!!!!!
S/F<
Lord CEYA!
#11
asleep at the wheel
Join Date: Aug 2004
Location: Chicago
Posts: 976
Bikes: Custom Richie Ditta Track Bike, Eddie Merckx Corsa, Marioni Custom Pista, Dolan Cyclocross
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by thenathanator
I believe that rubbing alcohol also works for sticker residue.. but I could be wrong.
#13
Ha ha ha ha ha
Join Date: May 2005
Location: Gold Coast; Australia
Posts: 4,554
Bikes: 2004 ORBEA Mitis2 Plus Carbon, 2007 Cannondale Bad Boy Si Disc, 2012 Trek Gary Fisher Collection Marlin WSD 29er Aldi Big Box (Polygon) 650b
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
Likes: 0
Liked 11 Times
in
7 Posts
Normal car polish. NOT CUT and POLISH
Steve.
Steve.
#14
Senior Moment
Join Date: Jul 2005
Location: DC
Posts: 146
Bikes: Gunnar Street Dog, Gunnar Roadie, Lotus Elan FG Conversion (in pieces), Trek 850 Antelope
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
There is a solvent called Naptha. It will not damage the paint or fog plexiglass. You can use it to remove sticky residue from almost anything, even solvent based stains in carpet etc without melting the carpet.
Naptha is the sole ingredient of lighter fluid and coleman camping gas or "white gas" as it is often called. It is flammable obviously so only do it outside or very very carefully, i.e., close the can after every dip with the rag.
Failing that, or possibly before that, use another piece of tape to pull the adhesive off. that often works better faster and neatlier than anything
dave
Naptha is the sole ingredient of lighter fluid and coleman camping gas or "white gas" as it is often called. It is flammable obviously so only do it outside or very very carefully, i.e., close the can after every dip with the rag.
Failing that, or possibly before that, use another piece of tape to pull the adhesive off. that often works better faster and neatlier than anything
dave
Originally Posted by RETTWINS
I have an old frame I've been building up. The other day I peeled some old sticker off and it left some super sticky goo on the bike. Now it's getting dirt and stuff stuck to it. What should I use to get this off? Tried various soaps around the house and nothing worked. Want something strong enough to take it off without hurting the finish. Thanks, Jarrett
#15
carpe napum
Join Date: May 2005
Posts: 381
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
This stuff isn't just flamable, it is seriously - explosively combustible. Way more than gasoline. Just the fumes from the container can travel around a room and find a reason to ignite. I've got a huge can of the stuff in my shed and it scares the crap out of me every time I see it.
Not worth the headache i'm thinking.
Not worth the headache i'm thinking.
#16
72 & Sunny
Join Date: Oct 2004
Location: Brooklyn
Posts: 1,103
Bikes: '93 Yamaguchi Pursuit track bike, Alan Super Record
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by lemurhouse
I've got a huge can of the stuff in my shed...
#18
Senior Moment
Join Date: Jul 2005
Location: DC
Posts: 146
Bikes: Gunnar Street Dog, Gunnar Roadie, Lotus Elan FG Conversion (in pieces), Trek 850 Antelope
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
lemurhouse is correct. although this is true of most solvents including gasoline. I work on old cars and there was a guy in one of the clubs who in true darwin award-esque fashion was disposing of gasoline in the fireplace. first jugful wnet in. He lit that with no problems but when he walked into the room with the next one the fumes made it to the fireplace before he did, with predictable results. nobody that I knew personally. solvent fumes will ignite on any open flame or spark if they are present in thick enough concentration. Since they are mostly heavier than air, usually they collect in low lying areas likke the bottom of your hot water heater where they get set off by the pilot light. this goes for jasco fumes, lacquer thinner, nail polish remover (which is acetone which no one raised any alarm about) yes it is all dangerous. please be careful. do it outside, not in your ninth floor walk up co-op apt. in NYC...
or use the tape trick. works great.
btdt....
dave
or use the tape trick. works great.
btdt....
dave
Originally Posted by lemurhouse
This stuff isn't just flamable, it is seriously - explosively combustible. Way more than gasoline. Just the fumes from the container can travel around a room and find a reason to ignite. I've got a huge can of the stuff in my shed and it scares the crap out of me every time I see it.
Not worth the headache i'm thinking.
Not worth the headache i'm thinking.
#19
Papa Wheelie
Join Date: Feb 2005
Location: Madison, Wi
Posts: 1,470
Bikes: Jamis Aurora '02; Takara Medalist (650B)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
propane torch
if the rest of the paint starts coming off, Acht! Just take it ALL off
if the rest of the paint starts coming off, Acht! Just take it ALL off
#21
Good for Business
Join Date: Oct 2005
Location: Madison
Posts: 853
Bikes: Team Fooj
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Can I safely assume that all these ideas (specifically rubbing alcohol, I'm thinking) work for old stickers as well? 'Cause I've got some old freakin' stickers I want off...
#22
Middle Aged
Join Date: Jun 2005
Location: Queens
Posts: 55
Bikes: Surly-steamroller-S*** Brown color
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
My votes for lighter fluid.
Either that or get real primative and just rub the residue till you wear the skin off your palms.- that'd be hawd-core... might not acheive the desired effect though.
Either that or get real primative and just rub the residue till you wear the skin off your palms.- that'd be hawd-core... might not acheive the desired effect though.
#25
Senior Member
Join Date: Jul 2005
Location: Manhattan, NY
Posts: 81
Bikes: Bob Jackson Track, 1985 Centurion Dave Scott, 1983 Miyata 610
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
WD-40. Everyone has it, and there's no need to go out and buy any specialty products.