Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

3/32 vs 1/8 Chain and Compatability

Notices
Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

3/32 vs 1/8 Chain and Compatability

Old 08-21-19, 06:02 PM
  #1  
sshakari
Senior Member
Thread Starter
 
sshakari's Avatar
 
Join Date: Jul 2005
Location: Tarzana, CA
Posts: 700

Bikes: Canyon Endurace, Merckx liege 75, Cinelli Vigorelli

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 167 Post(s)
Liked 114 Times in 61 Posts
3/32 vs 1/8 Chain and Compatability

can I run a 3/32 chain with a 1/8 cog and vice versa on a single speed freewheel?

Asking because I ride a 48x20 and just got a new 3/32 crankset.
sshakari is offline  
Old 08-22-19, 04:40 AM
  #2  
dsaul
Senior Member
 
Join Date: Jan 2013
Location: South Jersey
Posts: 2,258
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 712 Post(s)
Liked 793 Times in 471 Posts
You can run an 1/8" chain on 3/32 cogs/chainrings, but not the other way around. 1/8" = 4/32", so it would be too big for the 3/32" chain to fit on it.
dsaul is offline  
Likes For dsaul:
Old 08-22-19, 07:43 AM
  #3  
FiftySix
I'm the anecdote.
 
Join Date: Apr 2019
Location: S.E. Texas
Posts: 1,823

Bikes: '12 Schwinn, '13 Norco

Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 1110 Post(s)
Liked 1,176 Times in 795 Posts
Originally Posted by sshakari
can I run a 3/32 chain with a 1/8 cog and vice versa on a single speed freewheel?

Asking because I ride a 48x20 and just got a new 3/32 crankset.
You're going to have to get a 3/32" cog if you put on a 3/32" chain.

Like dsaul mentioned, a 3/32" chain won't even fit over the teeth and sit in the valleys of a 1/8" cog or chainring.
FiftySix is offline  
Old 08-22-19, 08:20 AM
  #4  
RoCou
Member
 
Join Date: Jul 2019
Posts: 31
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 15 Post(s)
Liked 8 Times in 6 Posts
Can't run 3/32 chain on 1/8 cog/chainring. The inverse (1/8 chain on 3/32 cog and/or chainring) runs fine.

Note that "3/32 chain" means a whole range of chain widths, from 7/8-speed all the way to 12-speed; and the same can be said of "3/32 cogs" and "3/32 chainrings".
RoCou is offline  
Likes For RoCou:
Old 08-22-19, 08:37 AM
  #5  
3alarmer 
Friendship is Magic
 
3alarmer's Avatar
 
Join Date: Nov 2010
Location: Sacramento, CA
Posts: 22,932

Bikes: old ones

Mentioned: 304 Post(s)
Tagged: 0 Thread(s)
Quoted: 26251 Post(s)
Liked 10,232 Times in 7,101 Posts
...if you decide to run a 1/8" chain, the sloppy fit on the chain wheel usually results in some unwanted noise from the drive train. It will work, but you're way better off using a 3/32 rear cog and a chain to match it all. They're available.
3alarmer is offline  
Likes For 3alarmer:
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Shinkers
Singlespeed & Fixed Gear
10
05-10-14 05:57 PM
KoolKeith
Singlespeed & Fixed Gear
6
03-23-12 06:13 PM
flayz
Singlespeed & Fixed Gear
16
06-13-11 01:32 PM
mnguyen
Singlespeed & Fixed Gear
11
06-13-10 09:18 PM
TallRider
Singlespeed & Fixed Gear
11
04-02-10 07:15 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.