Caliper brake, carbon wheel lifespan
#26
Senior Member
Thread Starter
Join Date: Feb 2019
Posts: 330
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 173 Post(s)
Liked 57 Times
in
40 Posts
I have the Cometes and am very pleased with them, primarily because of tubeless comfort and low rolling resistance (plus I’ve been saved from flats at least a couple of times that I know of). Once up to speed they hold speed nicely. As to braking, I live in FLatland... but when I have to touch my brakes stopping performance is excellent in the dry; no experience in the wet yet. You probably know all of this already since you own the Cosmic Pros.
I haven’t gone disc because I’m very utilitarian and have no need for another bike when what I have meets all of my cycling needs currently. My bike isn’t holding me back at all. If I were to buy another bike I’d probably look at discs since I had them before on a hybrid and my experience with them (in Colorado) was positive.
No 10 yr review but I’m happy with them; they are solid.
I haven’t gone disc because I’m very utilitarian and have no need for another bike when what I have meets all of my cycling needs currently. My bike isn’t holding me back at all. If I were to buy another bike I’d probably look at discs since I had them before on a hybrid and my experience with them (in Colorado) was positive.
No 10 yr review but I’m happy with them; they are solid.
After making the switch to Mavic UST, I'm unsure which positive traits can be attributed to the UST tire or the rim/spoke/bearings. As a whole, it's better in every way when compared to my prior setup: box-section, Roval slx24, gp4ks2 clincher. I have the basic cosmic wheel, non-SL. I wonder if the SL version is worth the price difference and whether the upgraded bearings make it less durable.
#27
Senior Member
I've read that taller profiled aero rims are inherently more flexible. Do you notice much flex when sprinting out-of-the-saddle? I'm primarily thinking of making the switch because I found them for a killer deal and I like the look of deeper dish rims. If it's faster, that's a bonus. If it's more flexible, then I'll stick with the Cosmic.
After making the switch to Mavic UST, I'm unsure which positive traits can be attributed to the UST tire or the rim/spoke/bearings. As a whole, it's better in every way when compared to my prior setup: box-section, Roval slx24, gp4ks2 clincher. I have the basic cosmic wheel, non-SL. I wonder if the SL version is worth the price difference and whether the upgraded bearings make it less durable.
1) Yksion tires and rim play well together. Could seat them with a floor pump w/o any drama.
2) They roll well.
3) They are comfortable (80F/85R)
4) They’ve saved my bacon (flats) twice.
5) Anything north of 20mph you can feel a slight aero benefit. They hold speed well.
6) Braking sounds like a turbo-mothership slowing down to earth...
U-hum traits:
1) They are not the fastest accelerating hoops, but at 64mm that is to be expected.
2) They are fairly stable in crosswinds; just don’t take off your vest nor try any other no-handed-riding buffoonery...
3) When you coast everyone will know...
You could go to a certified Mavic dealer and try them before you buy. Many of them have a set that you can rent for the weekend.
Last edited by GreenAnvil; 08-06-19 at 03:32 PM.
#28
Senior Member
Join Date: Aug 2012
Posts: 209
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 26 Post(s)
Likes: 0
Liked 12 Times
in
8 Posts
Just a note on "flexiness." In general, a deep section wheel will be less "flexy" than a shallow wheel. The depth of the rim section will add stiffness, plus the spokes will be shorter, and therefore a little stiffer. Of course, spoke designs vary, so it's not universally true, but it's directionally correct. There was a link in a different thread a while back (sorry, can't find it right now) that explained that tire rub during hard efforts was the result of a flexing frame combined with a stiffer wheel. Hopefully I remembered that correctly. You may find that a super stiff wheel affects the ride quality of the bike a little. I have a set of 45mm carbon wheels and also some good quality aluminum wheels. The aluminum wheels definitely ride just a bit softer, even with the exact same tires and pressures. It's not night and day, but it is noticeable.
Likes For MikeEckhaus:
#29
Non omnino gravis
#31
Non omnino gravis
I'm sure that with wheels, everything from spoke count to spoke type to type of hub makes a difference... all I know is my cheap carbon wheels with cheap hubs smooth out the ride better than my cheap-hubbed cheap alloy wheels.
#32
SuperGimp
I've had more than one person say they had installed carbon handlebars and "couldn't tell the difference." So it takes all kinds.
I'm sure that with wheels, everything from spoke count to spoke type to type of hub makes a difference... all I know is my cheap carbon wheels with cheap hubs smooth out the ride better than my cheap-hubbed cheap alloy wheels.
I'm sure that with wheels, everything from spoke count to spoke type to type of hub makes a difference... all I know is my cheap carbon wheels with cheap hubs smooth out the ride better than my cheap-hubbed cheap alloy wheels.
I thought you were religiously opposed to carbon wheels? What'd you end up with?
#33
Non omnino gravis
Now a card-carrying member of C^5: the Cheap Chinese Carbon Clincher Club. The wife bought me a pair of ICAN FL50s for Father's Day. I've no complaints.
Well, the included brake pads were garbage, but I can't complain too much about free brake pads. I just switched them out for some Token pads, which are significantly better... but I'm still not taking this thing out in the rain.
Well, the included brake pads were garbage, but I can't complain too much about free brake pads. I just switched them out for some Token pads, which are significantly better... but I'm still not taking this thing out in the rain.
#34
Senior Member
Thread Starter
Join Date: Feb 2019
Posts: 330
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 173 Post(s)
Liked 57 Times
in
40 Posts
I got mine a full $500 less than what my LBS was asking, so I decided to take the plunge. Positive traits IME:
1) Yksion tires and rim play well together. Could seat them with a floor pump w/o any drama.
2) They roll well.
3) They are comfortable (80F/85R)
4) They’ve saved my bacon (flats) twice.
5) Anything north of 20mph you can feel a slight aero benefit. They hold speed well.
6) Braking sounds like a turbo-mothership slowing down to earth...
You could go to a certified Mavic dealer and try them before you buy. Many of them have a set that you can rent for the weekend.
1) Yksion tires and rim play well together. Could seat them with a floor pump w/o any drama.
2) They roll well.
3) They are comfortable (80F/85R)
4) They’ve saved my bacon (flats) twice.
5) Anything north of 20mph you can feel a slight aero benefit. They hold speed well.
6) Braking sounds like a turbo-mothership slowing down to earth...
You could go to a certified Mavic dealer and try them before you buy. Many of them have a set that you can rent for the weekend.
That's not a bad idea. I'll see if there's a local dealer for me to try them out. I've found a set -direct from France- for $1k non-sl and $1450 for SL. Since durability is at the forefront for me, and not speed or weight, I'll likely get the regular version.
#35
Senior Member
Thread Starter
Join Date: Feb 2019
Posts: 330
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 173 Post(s)
Liked 57 Times
in
40 Posts
Just a note on "flexiness." In general, a deep section wheel will be less "flexy" than a shallow wheel. The depth of the rim section will add stiffness, plus the spokes will be shorter, and therefore a little stiffer. Of course, spoke designs vary, so it's not universally true, but it's directionally correct. There was a link in a different thread a while back (sorry, can't find it right now) that explained that tire rub during hard efforts was the result of a flexing frame combined with a stiffer wheel. Hopefully I remembered that correctly. You may find that a super stiff wheel affects the ride quality of the bike a little. I have a set of 45mm carbon wheels and also some good quality aluminum wheels. The aluminum wheels definitely ride just a bit softer, even with the exact same tires and pressures. It's not night and day, but it is noticeable.
Likes For Princess_Allez:
#36
Senior Member
Thread Starter
Join Date: Feb 2019
Posts: 330
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 173 Post(s)
Liked 57 Times
in
40 Posts
I've had more than one person say they had installed carbon handlebars and "couldn't tell the difference." So it takes all kinds.
I'm sure that with wheels, everything from spoke count to spoke type to type of hub makes a difference... all I know is my cheap carbon wheels with cheap hubs smooth out the ride better than my cheap-hubbed cheap alloy wheels.
I'm sure that with wheels, everything from spoke count to spoke type to type of hub makes a difference... all I know is my cheap carbon wheels with cheap hubs smooth out the ride better than my cheap-hubbed cheap alloy wheels.
#39
Senior Member
Ya, I don’t know who that post was referring to either; I hope this thread doesn’t get derailed by personal attacks (which can apparently happen very quickly around here...).
Back to the OP. Lifespan. I haven’t had mine long enough (coming up on 1k) so the jury is still out. I only run the Mavic yellow pads. They do leave a yellow residue but it’s minor and I don’t care. Mavic recently came out with black pads (I just received two sets; not needed yet but I like to have replacements ready just in case). The reason I mention this is because you may void your warranty if you use different pads. Others run Black Prince, cryo-blue, etc. IMO rim/pad choice may be a factor in wheels’ lifespan, along with riding conditions (rain?), rider’s weight and others. However @ $40 USD a pair (meaning, just one caliper set) the Mavic pads are not cheap.... >:-/
Back to the OP. Lifespan. I haven’t had mine long enough (coming up on 1k) so the jury is still out. I only run the Mavic yellow pads. They do leave a yellow residue but it’s minor and I don’t care. Mavic recently came out with black pads (I just received two sets; not needed yet but I like to have replacements ready just in case). The reason I mention this is because you may void your warranty if you use different pads. Others run Black Prince, cryo-blue, etc. IMO rim/pad choice may be a factor in wheels’ lifespan, along with riding conditions (rain?), rider’s weight and others. However @ $40 USD a pair (meaning, just one caliper set) the Mavic pads are not cheap.... >:-/
Last edited by GreenAnvil; 08-08-19 at 05:17 PM.
#40
Senior Member
Thread Starter
Join Date: Feb 2019
Posts: 330
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 173 Post(s)
Liked 57 Times
in
40 Posts
Back to the OP. Lifespan. I haven’t had mine long enough (coming up on 1k) so the jury is still out. I only run the Mavic yellow pads. They do leave a yellow residue but it’s minor and I don’t care. Mavic recently came out with black pads (I just received two sets; not needed yet but I like to have replacements ready just in case). The reason I mention this is because you may void your warranty if you use different pads. Others run Black Prince, cryo-blue, etc. IMO rim/pad choice may be a factor in wheels’ lifespan, along with riding conditions (rain?), rider’s weight and others. However @ $40 USD a pair (meaning, just one caliper set) the Mavic pads are not cheap.... >:-/
The yellow pads wear out pretty quickly. I'd say it's a fair trade-off between eating brake track vs pads. In fact, it seems to wear so quickly that I purchased a second set of pads just in case. I think I found mine across the pond for ~$60 (front+rear). It wouldn't surprise me if these pads only get a couple hundred miles out of them.
#41
Senior Member
Not sure on the road. My gravel bike got about 1100 miles out of the factory pads. I'll chalk a lot of the wear up to a 30 mile ride on a rainy day, basically blasted them to the minimum thickness from the grit thrown up by the tires. BTW, that was also my first experience on discs in wet conditions and I was decidedly not impressed. It took a lot of effort to stop and they made constant noise whether on the brakes or not.
#42
Senior Member
Join Date: Oct 2018
Location: VA
Posts: 1,437
Bikes: SuperSix Evo | Revolt
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 733 Post(s)
Liked 815 Times
in
414 Posts
Not sure on the road. My gravel bike got about 1100 miles out of the factory pads. I'll chalk a lot of the wear up to a 30 mile ride on a rainy day, basically blasted them to the minimum thickness from the grit thrown up by the tires. BTW, that was also my first experience on discs in wet conditions and I was decidedly not impressed. It took a lot of effort to stop and they made constant noise whether on the brakes or not.
#43
Senior Member
What brakes are you using? My 105 hyd discs have been fantastic in the rain (on the road and the gravel), and even more so in the dry. Everyone touts discs brakes for wet weather, but they are also vastly better than rim brakes in the dry, especially when rider/bike are 200+lbs and doing a lot of descending. My next road bike will absolutely have hyd discs (and possibly di2, starting to get tired of cable issues already lol).
#44
Senior Member
Join Date: Jun 2012
Posts: 878
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 129 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
I have run a few sets of rim brake tubular carbon rims, almost always with Swiss stop black prince pads:
zipp 303 for about 15,000 miles, no noticeable wear on brake tracks
Easton ec90 about 6000 miles, no noticeable wear on brake tracks
Mercury 30mm, about 1000 miles, zero wear
Bontrager Aeolus, various, over 10,000 miles, no noticeable wear on brake tracks - exception is one rim I picked up cheap on ebay that had been raced in muddy snow for cx, that has obvious brake track wear
Ax lightness, about 2000 miles, no wear and excellent stopping power
Now I use the Aeolus and Enve 2.2, with the textured brake track. Braking is powerful and better than alloy rims. And sounds like a jet engine. Enve says to use their branded pads, they seem the same or very similar to the swiss stop black prince fwiw.
The newest generation brake tracks from Zipp, Bontrager, and Enve are just as good as alloy. I've only tried Enve but hear the others are the same.
My conclusion is for a lighter bike, modern rim brake carbon is GTG. Disc would be recommended for a heavier rider, poor weather, long descents. Also, disc brakes allow the use of wider rims, which helps aero if you use wider tires.
#45
Senior Member
Thread Starter
Join Date: Feb 2019
Posts: 330
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 173 Post(s)
Liked 57 Times
in
40 Posts
They should last a really long time, depending on conditions. On clean dry roads I would not be surprised if quality carbon rims last as long or even longer than alloy rims. On wet roads my alloy rims would leave little slivers in the brake pads that then chew up the brake track, my carbon rims don't make slivers. After a rainy ride I do wipe off my rims and brake pads, but this is an absolute necessity for alloy rims.
I have run a few sets of rim brake tubular carbon rims, almost always with Swiss stop black prince pads
My conclusion is for a lighter bike, modern rim brake carbon is GTG. Disc would be recommended for a heavier rider, poor weather, long descents. Also, disc brakes allow the use of wider rims, which helps aero if you use wider tires.
I have run a few sets of rim brake tubular carbon rims, almost always with Swiss stop black prince pads
My conclusion is for a lighter bike, modern rim brake carbon is GTG. Disc would be recommended for a heavier rider, poor weather, long descents. Also, disc brakes allow the use of wider rims, which helps aero if you use wider tires.
I agree with your disc conclusion. If I rode long descents or in rain, the choice to go disc would be a no brainer. I just got into the sport of cycling at the beginning of the year. I'm still deciding if I'm the type of person to travel to ride. Right now, I use cycling as a form of exercise that's fun. If I do, then I could see myself doing long descents and would definitely go disc.
#46
Senior Member
Join Date: Mar 2010
Location: Seattle, WA
Posts: 23,208
Mentioned: 89 Post(s)
Tagged: 0 Thread(s)
Quoted: 18883 Post(s)
Liked 10,646 Times
in
6,054 Posts
I really enjoy riding in different places and great scenery. Traveling to ride is worth it.
#48
Senior Member
Join Date: Jan 2014
Location: Southern California, USA
Posts: 10,474
Bikes: 1979 Raleigh Team 753
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3374 Post(s)
Liked 371 Times
in
253 Posts
What you CAN do not having discs and what is regularly done for market may be different. I have several double disc brake bikes, more with rim brakes and some with both. My tandem came with double discs. I "right sized" and have a disc in the rear and rim brake on the front. I have the ENVE serrated brake track tubulars which I hate (the non smooth track). So I rarely use the front, but they work fine for a fast stop. I have not done long mountain descents riding the brakes, or dealt with water and mud - nor will I.
The tandem switch allowed me to move to a lighter fork. I saved about 220g. The rotors were huge, I saved there. I did some lighter cables and lighter wheels and - saved 5 lbs. That is not exactly a fair comparison, but there is more to discs than the calipers and rotors. Doing tubulars will knock a lot of weight off. Clincher rim braked tandems have left me with the brake track blown off, more than once.
My (kid's) lightest bike could be lighter, but I kept the steel and Di2 RD. It is just under 12#. His lightest disc braked bike is over 15#. It is not apples to apples. But I think that was my point. The kind of bike that requires discs will likely be different in other areas.
I was rather surprised the number of rim brake bikes I saw in the TdF. There there is no penalty in weight for having a disc as they have to add weight to get to that 6.8kg, might as well have a disc. They do not spool up as fast, but sure good for F1 style decents.
The tandem switch allowed me to move to a lighter fork. I saved about 220g. The rotors were huge, I saved there. I did some lighter cables and lighter wheels and - saved 5 lbs. That is not exactly a fair comparison, but there is more to discs than the calipers and rotors. Doing tubulars will knock a lot of weight off. Clincher rim braked tandems have left me with the brake track blown off, more than once.
My (kid's) lightest bike could be lighter, but I kept the steel and Di2 RD. It is just under 12#. His lightest disc braked bike is over 15#. It is not apples to apples. But I think that was my point. The kind of bike that requires discs will likely be different in other areas.
I was rather surprised the number of rim brake bikes I saw in the TdF. There there is no penalty in weight for having a disc as they have to add weight to get to that 6.8kg, might as well have a disc. They do not spool up as fast, but sure good for F1 style decents.