FS: 10 items - hubs, freewheel, stem, RD, seatpost, brakes, computer
#1
Junior Member
Thread Starter
All that's left: Weinmann Vainqueur 610 Brakeset. $25.
Clearing stuff out. Prices include paypal fee but do not include shipping.
Sorry about the sideways photos. In the first image, the listing is bottom to top, left to right. Think of it as a good Sunday morning brain twister excercise.
Still available ...
7) Weinmann Vainqueur 610 Brakeset. No levers. Pads not original. $25.
These are gone ...
1) SOLD. Campagnolo front large flange hub. FLAT skewer. 36 hole. Bearings good. Was laced 4x. $25
2) SOLD. Shimano 7 speed freewheel. 13-28. Nice clicky spin.
3) SOLD. Nitto Young quill stem. 25.4 handlebar clamp. 90mm as Nitto measures, 95 mm along the top. Would be beautiful with a nice polish. $15.
4) SOLD. Shimano Low Flange hubset, 36 hole. Front is Dura Ace. Rear is not Dura Ace but no model designated. Bearings good. Both have oil hole clips. Sunshine curved skewers. $25.
5) SOLD. SunTour VX rear derailleur. Rough shape but all pivots work. Could use a good cleaning/lubing. Upper pulley should be replaced (teeth mostly worn off).
6) SOLD. American Classic black seatpost. 27.0. Works like a seatpost should. Post is 200mm long (bottom to rails) and the MAX is at 60mm which seems like not enough. If you accept that much insertion, you’d have 14cm from frame to seat rails. But I think you need more insertion than that. Also there’s some medium gouges but I don’t think structural unless you’re a Clydesdale. This is not a Clydesdale seatpost. $10.
8) SOLD. Gran Compe Brakeset with levers. No hoods. Very good condition. $40.
9) SOLD. Modolo levers. No hoods. $10.
10) SOLD. Cateye Velo 5 computer, with zip ties and magnet. I’m pretty sure it works but it’ll need a new battery. If a new battery doesn’t resurrect it, get your money back.
Please PM with what you want and what your zip code is. I’ll quote you shipping. I’ll ship USPS as inexpensively as I can. Feel free to make multiple item offers.
Let me know any questions. Thanks.
Drew
Sorry about the sideways photos. In the first image, the listing is bottom to top, left to right. Think of it as a good Sunday morning brain twister excercise.
Still available ...
7) Weinmann Vainqueur 610 Brakeset. No levers. Pads not original. $25.
These are gone ...
1) SOLD. Campagnolo front large flange hub. FLAT skewer. 36 hole. Bearings good. Was laced 4x. $25
2) SOLD. Shimano 7 speed freewheel. 13-28. Nice clicky spin.
3) SOLD. Nitto Young quill stem. 25.4 handlebar clamp. 90mm as Nitto measures, 95 mm along the top. Would be beautiful with a nice polish. $15.
4) SOLD. Shimano Low Flange hubset, 36 hole. Front is Dura Ace. Rear is not Dura Ace but no model designated. Bearings good. Both have oil hole clips. Sunshine curved skewers. $25.
5) SOLD. SunTour VX rear derailleur. Rough shape but all pivots work. Could use a good cleaning/lubing. Upper pulley should be replaced (teeth mostly worn off).
6) SOLD. American Classic black seatpost. 27.0. Works like a seatpost should. Post is 200mm long (bottom to rails) and the MAX is at 60mm which seems like not enough. If you accept that much insertion, you’d have 14cm from frame to seat rails. But I think you need more insertion than that. Also there’s some medium gouges but I don’t think structural unless you’re a Clydesdale. This is not a Clydesdale seatpost. $10.
8) SOLD. Gran Compe Brakeset with levers. No hoods. Very good condition. $40.
9) SOLD. Modolo levers. No hoods. $10.
10) SOLD. Cateye Velo 5 computer, with zip ties and magnet. I’m pretty sure it works but it’ll need a new battery. If a new battery doesn’t resurrect it, get your money back.
Please PM with what you want and what your zip code is. I’ll quote you shipping. I’ll ship USPS as inexpensively as I can. Feel free to make multiple item offers.
Let me know any questions. Thanks.
Drew
Last edited by drewellison; 08-21-20 at 01:47 PM. Reason: Updated with sold items.
#2
Senior Member
Join Date: Sep 2005
Location: Oakland, CA
Posts: 3,265
Bikes: '82 Univega Competizione, '72 Motobecane Grand Record, '83 Mercian KOM Touring, '85 Univega Alpina Uno, '76 Eisentraut Limited
Mentioned: 57 Post(s)
Tagged: 0 Thread(s)
Quoted: 1088 Post(s)
Liked 1,205 Times
in
701 Posts
I’d like the freewheel, pm coming.
Also interested in the vx and computer...
Also interested in the vx and computer...
Last edited by noobinsf; 08-09-20 at 11:24 AM.
#4
1/2 as far in 2x the time
Join Date: Nov 2013
Location: Northern Bergen County, NJ
Posts: 1,746
Bikes: Yes, Please.
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 499 Post(s)
Liked 285 Times
in
222 Posts
I'll take the Modolo levers please. pm coming
__________________
I seem to have lost what little mind I had left before this all started.
I seem to have lost what little mind I had left before this all started.
#5
Junior Member
Thread Starter
Total seatpost length is 20cm (to rails) and from the bottom to the word MAX (there is no line) is 6cm. So that would leave 14cm maximum from frame to rails. But I don’t think that 6cm is very much ... more insertion is better. (No joke here, please.) There is some minor gouging above the MAX line but I don’t think it to be structural. I rode with this seatpost for a while and I was about 190 lbs. at the time. No problem. But if you’re a Clydesdale, don’t ride on any American Classic seatpost. They are light.
Because of above comments, I’m dropping price to $10.
Because of above comments, I’m dropping price to $10.
#6
Senior Member
Thank You for the checking! Too short for my purpose. AC make great components for us lite weights!
#7
Senior Member
Join Date: Sep 2005
Location: Oakland, CA
Posts: 3,265
Bikes: '82 Univega Competizione, '72 Motobecane Grand Record, '83 Mercian KOM Touring, '85 Univega Alpina Uno, '76 Eisentraut Limited
Mentioned: 57 Post(s)
Tagged: 0 Thread(s)
Quoted: 1088 Post(s)
Liked 1,205 Times
in
701 Posts
drewellison , sent you a PM on the AC seat post after mulling it over some...
#8
Junior Member
Thread Starter
Bump. Still have 4 items available.
Drew
Drew
#9
Junior Member
Thread Starter
Thanks, all. Only two items left.
7) Weinmann Vainqueur 610 Brakeset. Pads not original. $25.
8) Gran Compe Brakeset with levers. No hoods. Very good condition. $40.
Please PM with what you want and what your zip code is. I’ll quote you shipping. I’ll ship USPS as inexpensively as I can.
Drew
7) Weinmann Vainqueur 610 Brakeset. Pads not original. $25.
8) Gran Compe Brakeset with levers. No hoods. Very good condition. $40.
Please PM with what you want and what your zip code is. I’ll quote you shipping. I’ll ship USPS as inexpensively as I can.
Drew
#10
Junior Member
Thread Starter
Still available ...
7) Weinmann Vainqueur 610 Brakeset. No levers. Pads not original. $25.
7) Weinmann Vainqueur 610 Brakeset. No levers. Pads not original. $25.
#11
Senior Member
Join Date: Sep 2005
Location: Oakland, CA
Posts: 3,265
Bikes: '82 Univega Competizione, '72 Motobecane Grand Record, '83 Mercian KOM Touring, '85 Univega Alpina Uno, '76 Eisentraut Limited
Mentioned: 57 Post(s)
Tagged: 0 Thread(s)
Quoted: 1088 Post(s)
Liked 1,205 Times
in
701 Posts
FYI, the computer works again with a new battery. Thanks again!
#12
Junior Member
Thread Starter