Would this be weird?
#1
Senior Member
Thread Starter
Would this be weird?
I got to thinking and I thought it would be cool to leave the frame as is. The epitome of the industrial look. Right, no paint. However I am thinking it should have a clear coat of course. Am I crazy?!?!
Thoughts?
#2
Senior Member
Join Date: Dec 2015
Location: Menomonee Falls, WI
Posts: 1,834
Bikes: 1984 Schwinn Supersport, 1988 Trek 400T, 1977 Trek TX900, 1982 Bianchi Champione del Mondo, 1978 Raleigh Supercourse, 1986 Trek 400 Elance, 1991 Waterford PDG OS Paramount, 1971 Schwinn Sports Tourer, 1985 Trek 670
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 604 Post(s)
Liked 1,064 Times
in
535 Posts
It would look awesome with silver components. A couple of brand, or tubing decals, would look cool under the clear coat.
Tim
Tim
#3
weapons-grade bolognium
Join Date: Dec 2008
Location: Across the street from Chicago
Posts: 6,344
Bikes: Battaglin Cromor, Ciocc Designer 84, Schwinn Superior 1981
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 985 Post(s)
Liked 2,378 Times
in
891 Posts
"Simpsons did it"
EDIT: Hmmmm...another M63 - weird.
EDIT: Hmmmm...another M63 - weird.
Last edited by thinktubes; 09-14-19 at 07:10 PM.
#4
Senior Member
Thread Starter
#6
Banned.
Join Date: Jul 2009
Location: PAZ
Posts: 12,294
Mentioned: 255 Post(s)
Tagged: 0 Thread(s)
Quoted: 2588 Post(s)
Liked 4,824 Times
in
1,709 Posts
I don't think you're crazy. I've done it before - twice:
DD
DD
Likes For Drillium Dude:
#7
Senior Member
Thread Starter
#8
Banned.
Join Date: Jul 2009
Location: PAZ
Posts: 12,294
Mentioned: 255 Post(s)
Tagged: 0 Thread(s)
Quoted: 2588 Post(s)
Liked 4,824 Times
in
1,709 Posts
DD
#9
Senior Member
Thread Starter
If I do, I'd go with the blue Gitane decals and maybe matching seat and tape in the same color (If available)
#10
Senior Member
Thread Starter
So I can buff these out? a lot of this finish throughout. I kinda like the look.
#11
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,045
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4512 Post(s)
Liked 6,386 Times
in
3,671 Posts
Like the @DrilliumDude rides there is a collector who did a Merz that turned out phenomenal as his finishing before paint was so good that no paint was needed if you lean this way at all.
#12
mycocyclist
Join Date: Dec 2016
Location: Monkey Junction, Wilmington, NC
Posts: 1,234
Bikes: 1964 Schwinn Paramount P-13 DeLuxe, 1964 Schwinn Sport Super Sport, 1972 Falcon San Remo, 1974 Maserati MT-1, 1974 Raleigh International, 1984 Lotus Odyssey, 198? Rossin Ghibli, 1990 LeMond Le Vanquer (sic), 1991 Specialized Allez Transition Pro, +
Mentioned: 23 Post(s)
Tagged: 0 Thread(s)
Quoted: 910 Post(s)
Liked 820 Times
in
452 Posts
Mycological
p.s. I have been contemplating a similar approach to my Ghibli, going plain Jane no makeup "warts and all" in defiance of Rossin's standard of over the top ostentation. After all, it's a Rossin and apparently anything goes?
Last edited by machinist42; 09-14-19 at 01:21 PM.
#13
Senior Member
Thread Starter
I don't mind it necessarily. The idea is growing on me. I had the crankset and fork removed professionally. Now I have to figure out how it all goes back together.
#14
Super Moderator
Join Date: Jul 2004
Location: Ffld Cnty Connecticut
Posts: 21,843
Bikes: Old Steelies I made, Old Cannondales
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1173 Post(s)
Liked 927 Times
in
612 Posts
Probably best to clean oils & salts off the frame first, so you don't get any little rust spots showing through the clear coat.
__________________
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.
FYI: https://www.bikeforums.net/forum-sugg...ad-please.html
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.
FYI: https://www.bikeforums.net/forum-sugg...ad-please.html
Likes For Homebrew01:
#15
Senior Member
Thread Starter
#16
Stop reading my posts!
Join Date: Sep 2004
Posts: 12,584
Mentioned: 90 Post(s)
Tagged: 0 Thread(s)
Quoted: 1444 Post(s)
Liked 1,063 Times
in
788 Posts
for some reason (I have a theory) there's nearly always some "rust bloom" that grows underneath the clear. Often it's the infamous "spiderweb" variety but upshot is if you live in any climate other than "mojave desert' you will probably only have the "clean look" of raw steel under the clear for a limited time. My theory is this is always happening underneath virtually any repaint, especially when amateurs like me did the prep, it's just that you see it clear as day when the "paint" is clear! So for my money I would take this to a powder-coat shop that would go from bead-blast cabinet straight to coating and pay them for a good clear PC job, hopefully applied over a dead-spotless and bone-dry frame!
Likes For unworthy1:
#17
52psi
Join Date: Aug 2013
Location: Tucson, AZ
Posts: 4,015
Bikes: Schwinn Volare ('78); Raleigh Competition GS ('79)
Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 790 Post(s)
Liked 802 Times
in
391 Posts
Not weird.
Very cool.
Very cool.
__________________
A race bike in any era is a highly personal choice that at its "best" balances the requirements of fit, weight, handling, durability and cost tempered by the willingness to toss it and oneself down the pavement at considerable speed. ~Bandera
A race bike in any era is a highly personal choice that at its "best" balances the requirements of fit, weight, handling, durability and cost tempered by the willingness to toss it and oneself down the pavement at considerable speed. ~Bandera
Likes For Fahrenheit531:
#18
Senior Member
Thread Starter
for some reason (I have a theory) there's nearly always some "rust bloom" that grows underneath the clear. Often it's the infamous "spiderweb" variety but upshot is if you live in any climate other than "mojave desert' you will probably only have the "clean look" of raw steel under the clear for a limited time. My theory is this is always happening underneath virtually any repaint, especially when amateurs like me did the prep, it's just that you see it clear as day when the "paint" is clear! So for my money I would take this to a powder-coat shop that would go from bead-blast cabinet straight to coating and pay them for a good clear PC job, hopefully applied over a dead-spotless and bone-dry frame!
I have no idea what that would cost and that is my biggest issue. Jury is out I guess. Very little chance it will see rain and it'll be stored inside.
#19
Senior Member
Join Date: Apr 2017
Location: Los Angeles, CA
Posts: 2,249
Bikes: 1964 Legnano Roma Olympiade, 1973 Raleigh Super Course, 1978 Raleigh Super Course, 1978 Peugeot PR10, 2002 Specialized Allez, 2007 Specialized Roubaix, 2013 Culprit Croz Blade
Mentioned: 68 Post(s)
Tagged: 0 Thread(s)
Quoted: 741 Post(s)
Liked 818 Times
in
421 Posts
I went thru a rat rod phase building my '73 Super Course. I built it up to see if I liked the fit and ride quality enough to commit to paint. I do a lot of coastal riding, and was worried about rust. In the end I decided to go crazy on paint and decals, because I enjoyed the ride so much. I did like the rat rod while it lasted. No worries about dinged paint.
Naked rat rod. Seat angle and pedals were temporary.
Better with paint?
Naked rat rod. Seat angle and pedals were temporary.
Better with paint?
#21
Banned.
Join Date: Jul 2009
Location: PAZ
Posts: 12,294
Mentioned: 255 Post(s)
Tagged: 0 Thread(s)
Quoted: 2588 Post(s)
Liked 4,824 Times
in
1,709 Posts
However, I had the Casati media-blasted, then I went over it a bit with some 00 Scotchbrite pads. Finally, I shot Krylon matte (flat) clear and it gives a nice, even finish. It's not anywhere near as durable as PC, or even a urethane clear, but since you're not planning on it seeing rain and keeping it indoors, well, it should be fine. I have a couple rust blooms after over the past year (refinished last summer), but they are small - not much bigger than the small blemishes you posted in your pics - the same aesthetic you like.
DD
#22
☢
#23
aged to perfection
Join Date: Jun 2009
Location: PacNW
Posts: 1,817
Bikes: Dinucci Allez 2.0, Richard Sachs, Alex Singer, Serotta, Masi GC, Raleigh Pro Mk.1, Hetchins, etc
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 838 Post(s)
Liked 1,258 Times
in
663 Posts
If you can find somebody who can lightly sand blast it and then shoot clear coat you will be very pleased with the look. A powder coat shop should be able to do this for you. I'm not sure if powder coating can be done clear but I don't see why not.
Mark Petry
Bainbridge Island, WA USA
Mark Petry
Bainbridge Island, WA USA
#24
mycocyclist
Join Date: Dec 2016
Location: Monkey Junction, Wilmington, NC
Posts: 1,234
Bikes: 1964 Schwinn Paramount P-13 DeLuxe, 1964 Schwinn Sport Super Sport, 1972 Falcon San Remo, 1974 Maserati MT-1, 1974 Raleigh International, 1984 Lotus Odyssey, 198? Rossin Ghibli, 1990 LeMond Le Vanquer (sic), 1991 Specialized Allez Transition Pro, +
Mentioned: 23 Post(s)
Tagged: 0 Thread(s)
Quoted: 910 Post(s)
Liked 820 Times
in
452 Posts
#25
Senior Member
Thread Starter
Thread
Thread Starter
Forum
Replies
Last Post
Bikedued
Classic & Vintage
18
03-12-13 07:39 PM
jhaskins
Singlespeed & Fixed Gear
4
04-13-10 12:58 PM