Go Back  Bike Forums > Bike Forums > General Cycling Discussion
Reload this Page >

Cheap Chinese Bike Quarantine Build

Notices
General Cycling Discussion Have a cycling related question or comment that doesn't fit in one of the other specialty forums? Drop on in and post in here! When possible, please select the forum above that most fits your post!

Cheap Chinese Bike Quarantine Build

Old 08-24-20, 08:25 PM
  #1  
Hog chef
Junior Member
Thread Starter
 
Join Date: Aug 2020
Location: San Mateo County, CA
Posts: 15

Bikes: Quarantine Home Built, Old Specialized Hardrock

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 5 Times in 4 Posts
Cheap Chinese Bike Quarantine Build

Hello, I'm new to this forum and just happen to be building my own bike during quarantine. So far I have gotten all the parts for my build except for the wheels. I was measuring and pre-fitting parts and noticed the press-in BB doesn't have L/R, arrows, dots, notches or markings of any kind indicating the drive side. As far as I can tell, both bearings are exactly the same. Only thing different is the inner sleeve which has a flange on one end and straight on the other with o-rings on both ends. Would it be safe to assume the end with the flange is the drive side? Thanks in advance and be fore warned as this is just the first of many questions to come. Keep the rubber side down and the shiny side up! Later...
Hog chef is offline  
Old 08-25-20, 04:10 AM
  #2  
Maelochs
Senior Member
 
Maelochs's Avatar
 
Join Date: Oct 2015
Posts: 15,453

Bikes: 2015 Workswell 066, 2017 Workswell 093, 2014 Dawes Sheila, 1983 Cannondale 500, 1984 Raleigh Olympian, 2007 Cannondale Rize 4, 2017 Fuji Sportif 1 LE

Mentioned: 144 Post(s)
Tagged: 0 Thread(s)
Quoted: 7628 Post(s)
Liked 3,453 Times in 1,823 Posts
It is safe to assume that asking the manufacturer is a pretty good idea.
Maelochs is offline  
Old 08-25-20, 04:11 AM
  #3  
Maelochs
Senior Member
 
Maelochs's Avatar
 
Join Date: Oct 2015
Posts: 15,453

Bikes: 2015 Workswell 066, 2017 Workswell 093, 2014 Dawes Sheila, 1983 Cannondale 500, 1984 Raleigh Olympian, 2007 Cannondale Rize 4, 2017 Fuji Sportif 1 LE

Mentioned: 144 Post(s)
Tagged: 0 Thread(s)
Quoted: 7628 Post(s)
Liked 3,453 Times in 1,823 Posts
I replaced all the press-fit BBs on my Chinese builds with thread-togethers. Heavier, but absolutely bullet-proof.
Maelochs is offline  
Old 08-25-20, 04:39 PM
  #4  
Hog chef
Junior Member
Thread Starter
 
Join Date: Aug 2020
Location: San Mateo County, CA
Posts: 15

Bikes: Quarantine Home Built, Old Specialized Hardrock

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 5 Times in 4 Posts
Thank you Maelochs. I just sent message to the manufacturer, waiting for their reply. I did, however, think about getting a different press-fit BB. Never even thought about threaded BBs...dammit! now I gotta tell the wifey I have to buy another tool.
Keep the rubber side down and the shiny side up! Later...
Hog chef is offline  
Old 08-25-20, 04:45 PM
  #5  
coffeecherrypie
Junior Member
 
Join Date: Oct 2017
Posts: 103
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 37 Post(s)
Liked 12 Times in 9 Posts
I think this thread should be in the Bicycle Mechanics subforum
coffeecherrypie is offline  
Old 08-25-20, 04:47 PM
  #6  
Barry2 
LR÷P=HR
 
Join Date: Sep 2019
Location: SF Bay Area
Posts: 2,136

Bikes: 1981 Holdsworth Special, 1993 C-dale MT3000 & 1996 F700CAD3, 2018 Cervelo R3 & 2022 R5, JustGo Runt, Ridley Oval, Kickr Bike 8-)

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 848 Post(s)
Liked 1,161 Times in 671 Posts
One Piece BB

Nothing wrong with Press Fit.
Just get a good One Piece BB and you'll be fine.

Barry
Barry2 is offline  
Old 08-25-20, 05:51 PM
  #7  
Maelochs
Senior Member
 
Maelochs's Avatar
 
Join Date: Oct 2015
Posts: 15,453

Bikes: 2015 Workswell 066, 2017 Workswell 093, 2014 Dawes Sheila, 1983 Cannondale 500, 1984 Raleigh Olympian, 2007 Cannondale Rize 4, 2017 Fuji Sportif 1 LE

Mentioned: 144 Post(s)
Tagged: 0 Thread(s)
Quoted: 7628 Post(s)
Liked 3,453 Times in 1,823 Posts
By the way @Hog chef,,,, you are three posts away form being able to post pictures, so you had best start shooting now. We want the full breakdown on the buildup.
Maelochs is offline  
Likes For Maelochs:
Old 08-27-20, 02:00 PM
  #8  
Hog chef
Junior Member
Thread Starter
 
Join Date: Aug 2020
Location: San Mateo County, CA
Posts: 15

Bikes: Quarantine Home Built, Old Specialized Hardrock

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 5 Times in 4 Posts
I got a quick reply from the bike frame manufacturer and the side with the flange is the drive side. I'll probably stick with this BB for now. I'll post pics one I have all the parts, wheels and all. Keep the rubber side down and the shiny side up! Later...
Hog chef is offline  
Likes For Hog chef:
Old 08-27-20, 02:44 PM
  #9  
Reflector Guy
Senior Member
 
Reflector Guy's Avatar
 
Join Date: Jul 2020
Location: Chicago
Posts: 1,340

Bikes: Bianchi Infinito XE, Via Nirone 7, GT Aggressor Pro

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 599 Post(s)
Liked 1,270 Times in 588 Posts
Cool that they responded so quickly!
Reflector Guy is offline  
Old 08-27-20, 02:54 PM
  #10  
tagaproject6
Senior Member
 
tagaproject6's Avatar
 
Join Date: Aug 2009
Posts: 8,550

Bikes: Wilier Izoard XP (Record);Cinelli Xperience (Force);Specialized Allez (Rival);Bianchi Via Nirone 7 (Centaur); Colnago AC-R Disc;Colnago V1r Limited Edition;De Rosa King 3 Limited(Force 22);DeRosa Merak(Red):Pinarello Dogma 65.1 Hydro(Di2)

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 551 Post(s)
Liked 276 Times in 144 Posts
Ttiuwop :d
tagaproject6 is offline  
Old 08-27-20, 11:41 PM
  #11  
Darth Lefty 
Disco Infiltrator
 
Darth Lefty's Avatar
 
Join Date: May 2013
Location: Folsom CA
Posts: 13,775

Bikes: Stormchaser, Paramount, Tilt, Samba tandem

Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 3126 Post(s)
Liked 2,102 Times in 1,366 Posts
I’m interested if this is going to be the usual chinabomb with Chinese carbon and retail components, or if it’s going to be made entirely from oddball Amazon knockoffs
Darth Lefty is offline  
Old 08-28-20, 03:59 AM
  #12  
Maelochs
Senior Member
 
Maelochs's Avatar
 
Join Date: Oct 2015
Posts: 15,453

Bikes: 2015 Workswell 066, 2017 Workswell 093, 2014 Dawes Sheila, 1983 Cannondale 500, 1984 Raleigh Olympian, 2007 Cannondale Rize 4, 2017 Fuji Sportif 1 LE

Mentioned: 144 Post(s)
Tagged: 0 Thread(s)
Quoted: 7628 Post(s)
Liked 3,453 Times in 1,823 Posts
Originally Posted by Darth Lefty
..... or if it’s going to be made entirely from oddball Amazon knockoffs
Rainforest Fire Disaster?

Last edited by Maelochs; 08-28-20 at 07:55 AM.
Maelochs is offline  
Likes For Maelochs:
Old 08-28-20, 07:47 AM
  #13  
Darth Lefty 
Disco Infiltrator
 
Darth Lefty's Avatar
 
Join Date: May 2013
Location: Folsom CA
Posts: 13,775

Bikes: Stormchaser, Paramount, Tilt, Samba tandem

Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 3126 Post(s)
Liked 2,102 Times in 1,366 Posts
Originally Posted by Maelochs
Raiforest Fire Disaster?
Top hits for mountain bike fork: Bucklos, Bolany, ZTZ, corki all $100-150
Frame: carbon hard tails around $400, though this is easier to find on Amazon
Wheels: still mostly seems to be Wheelmaster, a few wild mags
cockpit: plenty of now-familiar options
controls: the target for knockoffs seems to be Shimano EZ-Fires and similar level derailleurs. Some of them with shameless Shimano labels
und so weiter und so fort
__________________
Genesis 49:16-17
Darth Lefty is offline  
Old 08-28-20, 03:41 PM
  #14  
Barry2 
LR÷P=HR
 
Join Date: Sep 2019
Location: SF Bay Area
Posts: 2,136

Bikes: 1981 Holdsworth Special, 1993 C-dale MT3000 & 1996 F700CAD3, 2018 Cervelo R3 & 2022 R5, JustGo Runt, Ridley Oval, Kickr Bike 8-)

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 848 Post(s)
Liked 1,161 Times in 671 Posts
Originally Posted by Maelochs
By the way @Hog chef,,,, you are three posts away form being able to post pictures, so you had best start shooting now. We want the full breakdown on the buildup.
+1

I keep looking at those frames. I'v very interested in your build.



Pic's or it never happened!
Barry2 is offline  
Likes For Barry2:
Old 08-28-20, 07:47 PM
  #15  
Hog chef
Junior Member
Thread Starter
 
Join Date: Aug 2020
Location: San Mateo County, CA
Posts: 15

Bikes: Quarantine Home Built, Old Specialized Hardrock

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 5 Times in 4 Posts
Everything but the pedals (Speedplay), cables & housing (Jagwire), tires (Vittoria Rubino), tubes (Conti Race) and bar wrap (ESIgrip), are all Aliexpress cheap Chinese bike parts. I'll list prices and weight. I still need a few more posts before I can upload pics. So, until then, keep the rubber side down and the shiny side up! Later...
Hog chef is offline  
Likes For Hog chef:
Old 08-28-20, 07:52 PM
  #16  
Hog chef
Junior Member
Thread Starter
 
Join Date: Aug 2020
Location: San Mateo County, CA
Posts: 15

Bikes: Quarantine Home Built, Old Specialized Hardrock

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 5 Times in 4 Posts
Almost forgot, I was able to get a pretty cheap but very decent bicycle repair stand from Home Depot, RAD Cycle Pro Stand Plus $49 + Tax,S&H. They were going quick so act fast if you need one. keep the rubber side down and the shiny side up! Later...
Hog chef is offline  
Old 08-29-20, 12:44 PM
  #17  
Hog chef
Junior Member
Thread Starter
 
Join Date: Aug 2020
Location: San Mateo County, CA
Posts: 15

Bikes: Quarantine Home Built, Old Specialized Hardrock

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 5 Times in 4 Posts
I just thought I'd throw this out there. What should I use on the BB? Loctite, Carbon Paste, Grease or nothing-at-all. Keep the rubber side down and the shiny side up! Later...

First crappy pic. Better ones coming.
Hog chef is offline  
Old 08-29-20, 12:58 PM
  #18  
Barry2 
LR÷P=HR
 
Join Date: Sep 2019
Location: SF Bay Area
Posts: 2,136

Bikes: 1981 Holdsworth Special, 1993 C-dale MT3000 & 1996 F700CAD3, 2018 Cervelo R3 & 2022 R5, JustGo Runt, Ridley Oval, Kickr Bike 8-)

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 848 Post(s)
Liked 1,161 Times in 671 Posts
Originally Posted by Hog chef
I just thought I'd throw this out there. What should I use on the BB? Loctite, Carbon Paste, Grease or nothing-at-all. Keep the rubber side down and the shiny side up! Later...
I vote for Loctite 641 Retaining Compound.
if it works for “he who must not be named” its good enough for me



Barry

BTW the top tube on a carbon frame is quite thin. Clamp very gently or better yet clamp the seat post once installed.

Last edited by Barry2; 08-29-20 at 01:02 PM.
Barry2 is offline  
Likes For Barry2:
Old 08-29-20, 01:04 PM
  #19  
banjaboy
Senior Member
 
banjaboy's Avatar
 
Join Date: May 2013
Location: Vancouver BC Canada
Posts: 99

Bikes: Focus Izalco Pro 3.0 Specialized Sirrus 6.0 Genesis Core 50

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 34 Post(s)
Liked 33 Times in 20 Posts
Just like I wouldnt put Chinese food in my mouth off Ebay, I would be the same with putting my ass on Chinese bike parts without a thorough search and reviews.........
banjaboy is offline  
Likes For banjaboy:
Old 08-29-20, 04:04 PM
  #20  
Maelochs
Senior Member
 
Maelochs's Avatar
 
Join Date: Oct 2015
Posts: 15,453

Bikes: 2015 Workswell 066, 2017 Workswell 093, 2014 Dawes Sheila, 1983 Cannondale 500, 1984 Raleigh Olympian, 2007 Cannondale Rize 4, 2017 Fuji Sportif 1 LE

Mentioned: 144 Post(s)
Tagged: 0 Thread(s)
Quoted: 7628 Post(s)
Liked 3,453 Times in 1,823 Posts
ignore the Chinabomb haters. They are typing their posts on a Chinese-made phone or PC while telling you how bad everything from China is.

Loctite I believe is a two-part process, with 609 or 641 and a catalyst or hardener. And once it is in .... I wouldn't feel good about pounding it out. If the BB cups fit you shouldn't need Loctite, and if you need Loctite you need to get a BB which fits (IMO.) Otherwise CF past I'd say.

Ids that sort of a Pinarello clone? I know I have seen those chainstays but my brain is pretty old and not so useful. ..... Looks like a Workswell WCB-R-226. I was considering building one--even bought some parts---but then decided I had too many bikes already.
Maelochs is offline  
Old 08-29-20, 07:59 PM
  #21  
Hog chef
Junior Member
Thread Starter
 
Join Date: Aug 2020
Location: San Mateo County, CA
Posts: 15

Bikes: Quarantine Home Built, Old Specialized Hardrock

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 5 Times in 4 Posts
Grain of salt. Dig deep enough...and you'll end up in China Besides, China and Taiwan have been making bicycles ever since they copied it from the guy in Germany that invented it IDK what my frame's a clone of. I chatted with the ladies at both Workswell and Tideace. The frames looked identical to me, probably same factory. I went with Tideace because of shipping, 5 weeks. Wheels are coming rom Elite Wheels. 9 days to manufacture, 7-15 days shipping. We shall see. Damn, now I'm hungry for Chinese food. Good call on the Chinese food, thanks. Keep the rubber side down and the shiny side up! Later...
Hog chef is offline  
Old 09-04-20, 01:01 PM
  #22  
Hog chef
Junior Member
Thread Starter
 
Join Date: Aug 2020
Location: San Mateo County, CA
Posts: 15

Bikes: Quarantine Home Built, Old Specialized Hardrock

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 5 Times in 4 Posts
Stall on the build, still waiting for the wheels. Received 1 set of wheels from CSC for the wife's bike, so hopefully mine should be arriving soon. Quick question for those who wax their chains. I don't ride in the rain unless I get caught in a sudden downpour, which rarely happens in the Bay Area. Anyway, I plan to start waxing the chains on our bikes. I already have new chain sets ready to wax and when those are done, I'll be replacing the current ones on the bikes. If the old chains are still good, I'll clean and degrease those and get them waxed ready to go. My question is, if we give our bikes a quick wash almost after every ride, how long will the wax last? Thanks in advance. Keep the rubber side down and the shiny side up! Later...
Hog chef is offline  
Old 09-04-20, 03:13 PM
  #23  
Maelochs
Senior Member
 
Maelochs's Avatar
 
Join Date: Oct 2015
Posts: 15,453

Bikes: 2015 Workswell 066, 2017 Workswell 093, 2014 Dawes Sheila, 1983 Cannondale 500, 1984 Raleigh Olympian, 2007 Cannondale Rize 4, 2017 Fuji Sportif 1 LE

Mentioned: 144 Post(s)
Tagged: 0 Thread(s)
Quoted: 7628 Post(s)
Liked 3,453 Times in 1,823 Posts
I don't wash my bikes that frequently so i cannot tell you, but if you don't soap the chain or blast it with a high-pressure stream of water, that will help.

You have a chance to do groundbreaking science here. Log your results and include a link for us when you publish.
Maelochs is offline  
Old 09-04-20, 11:12 PM
  #24  
Hog chef
Junior Member
Thread Starter
 
Join Date: Aug 2020
Location: San Mateo County, CA
Posts: 15

Bikes: Quarantine Home Built, Old Specialized Hardrock

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 5 Times in 4 Posts
it's usually just a quick sponge bath, rinse and dry. No hard scrubbing or water blasting. Bike's get parked in the living room's why. Ok...guess I'll get the ol' notebook out and start taking notes Thank you. Keep the rubber side down and the shiny side up! Later...
Hog chef is offline  
Old 09-05-20, 02:38 PM
  #25  
Maelochs
Senior Member
 
Maelochs's Avatar
 
Join Date: Oct 2015
Posts: 15,453

Bikes: 2015 Workswell 066, 2017 Workswell 093, 2014 Dawes Sheila, 1983 Cannondale 500, 1984 Raleigh Olympian, 2007 Cannondale Rize 4, 2017 Fuji Sportif 1 LE

Mentioned: 144 Post(s)
Tagged: 0 Thread(s)
Quoted: 7628 Post(s)
Liked 3,453 Times in 1,823 Posts
Good clarification.

I spot-clean my bikes frequently (except my rain bike, which actually needs it more.) I use dilute Simple Green and a soft cloth to take off any grease, spilled sports drink, sweat drips, or sand which might mess up the finish or just look bad. Never takes the wax off my chain.
Maelochs is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.