Go Back  Bike Forums > Bike Forums > General Cycling Discussion
Reload this Page >

1000% OMNIGEAR BIKE Wide range cassette with a triple

Notices
General Cycling Discussion Have a cycling related question or comment that doesn't fit in one of the other specialty forums? Drop on in and post in here! When possible, please select the forum above that most fits your post!

1000% OMNIGEAR BIKE Wide range cassette with a triple

Old 01-20-21, 01:11 PM
  #1  
Andy_Z
Newbie
Thread Starter
 
Join Date: Jun 2018
Posts: 12
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 13 Post(s)
Liked 7 Times in 4 Posts
1000% OMNIGEAR BIKE Wide range cassette with a triple

I tend to ride my 9-spd triple 11-36T 24/38/48 bike as if it is a 1x drivetrain with 38T crank. When I can't get up a hill with the 36 cog/38 chainring, I just drop to the granny 24. When I manage to get above 35 mph or so (very rare) I will shift into my big chainring on the 11 or 13 cog. Other than than that, I always just stay in my middle ring. Honestly idk if that's what you're "supposed" to do on a triple but that's always worked fine for me for over 10,000 miles of touring and communing on this exact drivetrain. But from this perspective, a triple 3x is simply a 1x with a granny gear and a "anti-granny" gear (big chainring).

So, I want to absolutely max my gear ratio out with the hugest combinations of cogs and chainrings possible. Cassette 10-46T (maybe even 50T+?), with a triple 22/38/54. I did the math and it provides over 1000% gear range, with a super climbing gear of <0.5 gear ratio, 12 gear-inches on 26" wheels, which should let me tow my 350-lb sailboat up the steep hills of Seattle. But, the "1x" 38T middle ring should be perfectly adequate for any commuting and road riding, while the biggo chainring will let me go freeway speeds down mountains. Big long cage derailleur to take up the slack, and I should be fine as long as I stay a half-cassette away from cross-chaining when I'm in the 22 or 54 (Like I said, I only use the 1 or 2 biggest/smallest cogs when I'm in the 1st or 3rd chainring, anyway).

I use friction shifters, and the 14t jump on my current chainring setup has never been an issue for me, so I don't imagine 16t will be unreasonable to handle either.

I guess my question is: why is this kind of setup seemingly really uncommon? People hype up the 1x drivetrain so much, but as far as I can tell a 1x is just a triple with a broken front derailleur stuck in the middle gear. I get that it's more simplified and what not, but are friction shifters and front derailleurs that unreliable, or heavy, or complicated? For like 1 extra pound you can get +500% gear ratio and that much more versatility out of your bike. And, while I've had to replace or service my RD cable and rear shifter system multiple times, I've literally never had to do anything to my front shifter or derailleur, and I've ridden THE **** out of this bike (fully loaded dirt road touring in freezing rain kind of ****, 500 continuous miles of salt-water coast riding without even lubing my chain kind of ****, etc). I've had so many bike shop dorks tell me that I need two different bikes (or even three!) if I want to tow heavy loads, have a spry commuter, take light fast road rides, and and go on extended tours with 100s of lbs of crap. But... why? As far as I can tell, a cheap ass used 28-lb steel bike with sturdy rack mounts and decent tire clearance can seemingly do all of those things pretty well provided with the right gears.

New omnigear 1000% drivetrain components are in the mail, I'll update this thread when I install everything, and report back on how awesome my bike is.
Andy_Z is offline  
Likes For Andy_Z:
Old 01-20-21, 01:17 PM
  #2  
Troul 
Senior Member
 
Troul's Avatar
 
Join Date: Oct 2013
Location: Mich
Posts: 7,291

Bikes: RSO E-tire dropper fixie brifter

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked 2,910 Times in 1,884 Posts
idk the reasoning, but I'd support a 1x15 setup after having slightly wider chain/seat stays.
__________________
-Oh Hey!
Troul is offline  
Old 01-20-21, 01:47 PM
  #3  
CAT7RDR
Senior Member
 
Join Date: May 2017
Location: Hacienda Hgts
Posts: 2,083

Bikes: 1999 Schwinn Peloton Ultegra 10, Kestrel RT-1000 Ultegra, Trek Marlin 6 Deore 29'er

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 811 Post(s)
Liked 1,946 Times in 936 Posts
Post a pic towing the sailboat.
CAT7RDR is offline  
Old 01-20-21, 01:53 PM
  #4  
Reflector Guy
Senior Member
 
Reflector Guy's Avatar
 
Join Date: Jul 2020
Location: Chicago
Posts: 1,340

Bikes: Bianchi Infinito XE, Via Nirone 7, GT Aggressor Pro

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 599 Post(s)
Liked 1,270 Times in 588 Posts
Have you considered.... a BIOPACE crankset?
Reflector Guy is offline  
Likes For Reflector Guy:
Old 01-20-21, 02:31 PM
  #5  
Russ Roth
Senior Member
 
Join Date: Dec 2019
Location: South Shore of Long Island
Posts: 2,762

Bikes: 2010 Carrera Volans, 2015 C-Dale Trail 2sl, 2017 Raleigh Rush Hour, 2017 Blue Proseccio, 1992 Giant Perigee, 80s Gitane Rallye Tandem

Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1073 Post(s)
Liked 999 Times in 710 Posts
Some bikes don't need more then a 1x, my MTB has a 38 11-46 set up and I've yet to need anything more so why have more? My cross bike is set up 46/30 with an 11/36, when I ride cross or off-road I just leave it in the 30 unless I hit a paved section or long downhill, just as I usually don't leave the 46 riding pavement. There isn't a hill around me that can't be tackled with a 38/36 but I can bail out if I need and that 46/11 is fast enough for any kind of riding or racing I might do on the bike. My road bike I used all 20 gears and haven't had the need for a triple. With modern cassettes and chainrings I think the triple is becoming redundant, a double can have very similar or the same ranges as a triple due to the limits of derailleurs. The right rear der can handle a 16t jump in the front and move through an 11-40 cassette, none I know of will handle that same cassette and a triple crank.
Russ Roth is offline  
Old 01-20-21, 02:42 PM
  #6  
Pratt
Senior Member
 
Join Date: Aug 2019
Posts: 1,095
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 410 Post(s)
Liked 488 Times in 291 Posts
My triple, 24/36/46, gets ridden like three, four speeds. Between my age and Vermont's hills, the 46 is more decorative than functional.
Pratt is offline  
Likes For Pratt:
Old 01-20-21, 03:14 PM
  #7  
Miradaman
Full Member
 
Join Date: Nov 2019
Location: Greater Chicago Area
Posts: 250

Bikes: 1987 Schwinn Mirada, 1989 Trek 420, 1995 GT Timberline, 1979 Schwinn Super Le Tour, Co-Op DRT 1.3

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 103 Post(s)
Liked 85 Times in 49 Posts
For an all-rounder endurance road bike, yeah, I do not at all understand why they don't make them with triples. My 30-year old low-end steel Trek with granny gear tackles hills loads better than the newer $1000+ carbon fiber road bikes with 50/34 up front (or whatever it is) that my regular riding companions have...
Miradaman is offline  
Old 01-20-21, 03:33 PM
  #8  
indyfabz
Senior Member
 
indyfabz's Avatar
 
Join Date: Jan 2010
Posts: 39,059
Mentioned: 210 Post(s)
Tagged: 1 Thread(s)
Quoted: 18320 Post(s)
Liked 15,299 Times in 7,231 Posts
You do that.
indyfabz is offline  
Likes For indyfabz:
Old 01-20-21, 03:54 PM
  #9  
shelbyfv
Expired Member
 
shelbyfv's Avatar
 
Join Date: Jun 2007
Location: TN
Posts: 11,461
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 3638 Post(s)
Liked 5,316 Times in 2,701 Posts
Originally Posted by Andy_Z
As far as I can tell, a cheap ass used 28-lb steel bike with sturdy rack mounts and decent tire clearance can seemingly do all of those things pretty well....
+1000. Bunch of poseur, wanna-be racer boys around here. Don't let's get started on those stupid jerseys with pockets and tight pants with diaper pads.
shelbyfv is offline  
Likes For shelbyfv:
Old 01-20-21, 04:26 PM
  #10  
tomato coupe
Senior Member
 
Join Date: Jul 2009
Posts: 5,879

Bikes: Colnago, Van Dessel, Factor, Cervelo, Ritchey

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 3906 Post(s)
Liked 7,182 Times in 2,905 Posts
You spend most of the time on your middle ring, and rarely use your big ring, but you need to double your gear range? Sounds ... logical.
tomato coupe is offline  
Likes For tomato coupe:
Old 01-20-21, 04:36 PM
  #11  
Andy_Z
Newbie
Thread Starter
 
Join Date: Jun 2018
Posts: 12
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 13 Post(s)
Liked 7 Times in 4 Posts
Originally Posted by Russ Roth
Some bikes don't need more then a 1x, my MTB has a 38 11-46 set up and I've yet to need anything more so why have more?
Very good question. A better question though is why NOT have more? Idk I do occasionally find that even the granny gear on a 36T cog is too much force for my weak ankles when I'm towing stuff up hill or am fully loaded with stuff for a long trip, and I often wish I had just a bit more mechanical advantage.

Originally Posted by Russ Roth
The right rear der can handle a 16t jump in the front and move through an 11-40 cassette, none I know of will handle that same cassette and a triple crank.
If I'm not mistaken (though there's a great chance that I am) Most long cage RDs should be able to handle it just fine as long as you stay in the small-cog-big-chainring and/or big-cog-small-chainring pairings? But yeah it's true that no derailleur in existence could handle every possible gear combo on the 11-46 triple
Andy_Z is offline  
Old 01-20-21, 04:39 PM
  #12  
Andy_Z
Newbie
Thread Starter
 
Join Date: Jun 2018
Posts: 12
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 13 Post(s)
Liked 7 Times in 4 Posts
Originally Posted by CAT7RDR
Post a pic towing the sailboat.
Accepted. Expect the photo evidence ~April 2021 when I pull it out of storage.
Andy_Z is offline  
Likes For Andy_Z:
Old 01-20-21, 04:41 PM
  #13  
indyfabz
Senior Member
 
indyfabz's Avatar
 
Join Date: Jan 2010
Posts: 39,059
Mentioned: 210 Post(s)
Tagged: 1 Thread(s)
Quoted: 18320 Post(s)
Liked 15,299 Times in 7,231 Posts
Originally Posted by shelbyfv
Don't let's get started on those stupid jerseys with pockets and tight pants with diaper pads.
Walking billboards they are.
indyfabz is offline  
Likes For indyfabz:
Old 01-20-21, 04:50 PM
  #14  
Andy_Z
Newbie
Thread Starter
 
Join Date: Jun 2018
Posts: 12
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 13 Post(s)
Liked 7 Times in 4 Posts
Originally Posted by tomato coupe
You spend most of the time on your middle ring, and rarely use your big ring, but you need to double your gear range? Sounds ... logical.
Who cares about logic it's 1000%!!!!! But yeah you're right 99 times out of hundred I won't use my extreme gear ratio options. But, those rare moments when I do need them it will be really nice to have em. Such as towing a sailboat up a mountain, which for some reason I strongly feel like my bike should be able to do that
Andy_Z is offline  
Old 01-20-21, 04:52 PM
  #15  
tyrion
Senior Member
 
tyrion's Avatar
 
Join Date: Oct 2015
Location: San Diego, California
Posts: 4,077

Bikes: Velo Orange Piolet

Mentioned: 28 Post(s)
Tagged: 0 Thread(s)
Quoted: 2228 Post(s)
Liked 2,011 Times in 972 Posts
Originally Posted by Andy_Z
I guess my question is: why is this kind of setup seemingly really uncommon?
Not many people use their bike to pull a boat.
tyrion is offline  
Likes For tyrion:
Old 01-20-21, 08:35 PM
  #16  
Random11
Senior Member
 
Join Date: May 2020
Location: North Florida
Posts: 510

Bikes: 2019 Specialized Diverge, 2021 Cervelo Caledonia

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 257 Post(s)
Likes: 0
Liked 378 Times in 197 Posts
I'm going in the other direction. My bike came with an 11-34 cassette, but I never used the biggest cogs so I replaced it with an 11-28.
Random11 is offline  
Old 01-20-21, 10:19 PM
  #17  
Kapusta
Advanced Slacker
 
Kapusta's Avatar
 
Join Date: Feb 2017
Posts: 6,187

Bikes: Soma Fog Cutter, Surly Wednesday, Canfielld Tilt

Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 2749 Post(s)
Liked 2,516 Times in 1,422 Posts
Originally Posted by Andy_Z
I guess my question is: why is this kind of setup seemingly really uncommon?
The fact that using half the cogs in the small ring will slack the chain (and possibly drop/jam it) due to insufficient chain wrap capacity is not a big selling point.
Kapusta is offline  
Likes For Kapusta:
Old 01-20-21, 10:31 PM
  #18  
CAT7RDR
Senior Member
 
Join Date: May 2017
Location: Hacienda Hgts
Posts: 2,083

Bikes: 1999 Schwinn Peloton Ultegra 10, Kestrel RT-1000 Ultegra, Trek Marlin 6 Deore 29'er

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 811 Post(s)
Liked 1,946 Times in 936 Posts
I am a novice at this but I imagine that towing a heavy load up a steep hill must present issues keeping the front wheel down?
How do you counteract that?
CAT7RDR is offline  
Old 01-20-21, 10:40 PM
  #19  
tomato coupe
Senior Member
 
Join Date: Jul 2009
Posts: 5,879

Bikes: Colnago, Van Dessel, Factor, Cervelo, Ritchey

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 3906 Post(s)
Liked 7,182 Times in 2,905 Posts
Originally Posted by Kapusta
The fact that using half the cogs in the small ring will slack the chain (and possibly drop/jam it) due to insufficient chain wrap capacity is not a big selling point.
Not as bad as the fact that using half the cogs in the big ring will likely rip the rear derailleur off its mount.
tomato coupe is offline  
Likes For tomato coupe:
Old 01-20-21, 10:51 PM
  #20  
Kapusta
Advanced Slacker
 
Kapusta's Avatar
 
Join Date: Feb 2017
Posts: 6,187

Bikes: Soma Fog Cutter, Surly Wednesday, Canfielld Tilt

Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 2749 Post(s)
Liked 2,516 Times in 1,422 Posts
Originally Posted by tomato coupe
Not as bad as the fact that using half the cogs in the big ring will likely rip the rear derailleur off its mount.
I was giving him the benefit of the doubt that he would size the chain for big/big..... but re-reading his post.... maybe not.
Kapusta is offline  
Old 01-21-21, 05:21 AM
  #21  
indyfabz
Senior Member
 
indyfabz's Avatar
 
Join Date: Jan 2010
Posts: 39,059
Mentioned: 210 Post(s)
Tagged: 1 Thread(s)
Quoted: 18320 Post(s)
Liked 15,299 Times in 7,231 Posts
Originally Posted by Random11
I'm going in the other direction. My bike came with an 11-34 cassette, but I never used the biggest cogs so I replaced it with an 11-28.
You need a bigger boat.
indyfabz is offline  
Likes For indyfabz:
Old 01-21-21, 09:02 AM
  #22  
Wildwood 
Veteran, Pacifist
 
Wildwood's Avatar
 
Join Date: Dec 2004
Location: Seattle area
Posts: 13,305

Bikes: Bikes??? Thought this was social media?!?

Mentioned: 284 Post(s)
Tagged: 0 Thread(s)
Quoted: 3876 Post(s)
Liked 4,781 Times in 2,206 Posts
Originally Posted by indyfabz
You need a bigger boat.
i can tow either of my boats (kayaks) with any of my bikes. But i don't have brakes on the little two wheeled hand cart - potentially problematic. I don't need a bigger boat, just a warmer Puget Sound.


People who post threads trying to make controversy out of their preferred gearing choices (electronic tracker, pedal choice, tire selection, etc) need to ride other folks terrain + bikes before claiming knowledge of Illuminational Truth.
__________________
Vintage, modern, e-road. It is a big cycling universe.
Wildwood is offline  
Likes For Wildwood:
Old 01-21-21, 09:07 AM
  #23  
indyfabz
Senior Member
 
indyfabz's Avatar
 
Join Date: Jan 2010
Posts: 39,059
Mentioned: 210 Post(s)
Tagged: 1 Thread(s)
Quoted: 18320 Post(s)
Liked 15,299 Times in 7,231 Posts
Originally Posted by wildwood
i
people who post threads trying to make controversy out of their preferred gearing choices (electronic tracker, pedal choice, tire selection, etc) need to ride other folks terrain + bikes before claiming knowledge of illuminational truth.
qft
indyfabz is offline  
Likes For indyfabz:
Old 01-21-21, 10:32 AM
  #24  
Wildwood 
Veteran, Pacifist
 
Wildwood's Avatar
 
Join Date: Dec 2004
Location: Seattle area
Posts: 13,305

Bikes: Bikes??? Thought this was social media?!?

Mentioned: 284 Post(s)
Tagged: 0 Thread(s)
Quoted: 3876 Post(s)
Liked 4,781 Times in 2,206 Posts
Originally Posted by indyfabz
qft
nolo contendre - quaternion algebra

i almost flunked DE 50years ago.
__________________
Vintage, modern, e-road. It is a big cycling universe.
Wildwood is offline  
Old 01-21-21, 11:03 AM
  #25  
Ogsarg
Senior Member
 
Join Date: Feb 2017
Location: Hollister, CA (not the surf town)
Posts: 1,724

Bikes: 2019 Specialized Roubaix Comp Di2, 2009 Roubaix, early 90's Giant Iguana

Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 636 Post(s)
Liked 1,490 Times in 543 Posts
If a huge gear range is what you want, go for it but it's pretty easy to see why it's not something that is offered by mainstream companies. I mean really, not many people expect to haul their sailboat on the same bike that they use for high speed descents.

The 1X setups are attractive to some because they get a wider gear range than what used to be offered with triples without having to deal with the FD but if you want to combine the two, have at it. And yes, please do show us the boat tow pics.
Ogsarg is offline  
Likes For Ogsarg:

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.