Show Your Vintage MTB Drop Bar Conversions
#6251
Senior Member
^Good for you, fixing up Dad’s bike. Looks great. It’s a lot of saddle-bar drop but if you are comfortable, it’s all good. Are you riding mostly on trails or pavement?
#6252
Junior Member
Join Date: Nov 2017
Posts: 17
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Yeah it's about 8cm. I ride mostly gravel "fire roads" stuff with this. But a lot of uphill and long downhills. I ride roadbikes a lot so i'm comfortable. On Trails it's too much drop i found, even though lowering the saddle helps. Wish there was a dropper post for 26,8mm seatposts. Gonna flip the stem to see if it gets better, but i'm too lazy to adjust the cantis since i have my modern fullsuspension for the gnarly stuff. But for long trips without gnarly downhills its great.
#6253
Junior Member
And since i have the required posts now... Here my Scott Evolution Pro. Tink it's from 1992 or something. Was my Dads first MTB, and he rode it hard. Was used as a city bike and now deserved some love. Had to get it powder coated since the old paint was coming of and it got a bit rusty here and there. Still using the original drive train (XT rear mech,dx front mech, xt cranks,)plus xt ( it think) brakes. Hope you like it.
BTW: I'm running 26x2,4 Conti X-Kings and they fit great. Gonna try a RaceKing 2,2 for a little more speed in the back though.
BTW: I'm running 26x2,4 Conti X-Kings and they fit great. Gonna try a RaceKing 2,2 for a little more speed in the back though.
#6254
Junior Member
Join Date: Jun 2018
Posts: 16
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Very happy to find this thread. Lot of inspiration. Been scouring ebay and local craigslist for a vintage MTB or hybrid that i can use for a winter nyc delivery bike.
Got eyes peeled
Got eyes peeled
#6255
Junior Member
Join Date: Apr 2017
Location: Seattle
Posts: 153
Bikes: BMC TeamMachine, Surly Pacer, All City Big Block
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 92 Post(s)
Liked 62 Times
in
30 Posts
And since i have the required posts now... Here my Scott Evolution Pro. Tink it's from 1992 or something. Was my Dads first MTB, and he rode it hard. Was used as a city bike and now deserved some love. Had to get it powder coated since the old paint was coming of and it got a bit rusty here and there. Still using the original drive train (XT rear mech,dx front mech, xt cranks,)plus xt ( it think) brakes. Hope you like it.
BTW: I'm running 26x2,4 Conti X-Kings and they fit great. Gonna try a RaceKing 2,2 for a little more speed in the back though.
BTW: I'm running 26x2,4 Conti X-Kings and they fit great. Gonna try a RaceKing 2,2 for a little more speed in the back though.
#6256
Senior Member
Join Date: Aug 2015
Location: Delaware Sea Shore
Posts: 532
Bikes: There is always room for one more.
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 184 Post(s)
Liked 389 Times
in
226 Posts
This is a late 90's Giant Iguana I literally pulled out of a dumpster at my sister in law's beach house. Replaced the suspension fork with a rigid fork and resprayed with Rustoleum "Spa Blue". The brifters are Sora and brakes and rear derailleur are Deore. The Sora levers have enough pull to operate the v-brakes very nicely.
Last edited by GeezyRider; 11-02-18 at 01:02 PM. Reason: correct spelling
#6257
Ellensburg, WA
Join Date: Aug 2008
Location: Ellensburg, WA
Posts: 3,755
Bikes: See my signature
Mentioned: 77 Post(s)
Tagged: 0 Thread(s)
Quoted: 313 Post(s)
Liked 457 Times
in
160 Posts
This is a late 90's Giant Iguana I literally pulled out of a dumpster at my sister in law's beach house. Replaced the suspension fork with a non-suspension cromoly one and resprayed with Rustoleum "Spa Blue". The brifters are Sora and brakes and rear derailleur are Deore. The Sora levers have enough pull to operate the v-brakes very nicely.
__________________
1984 Gitane Tour de France; 1968 Peugeot PL8; 1982 Nishiki Marina 12; 1984 Peugeot PSV; 1993 Trek 950 mtb; 1983 Vitus 979; Colnago Super, mid-80's Bianchi Veloce, 1984 or 85 Vitus 979
1984 Gitane Tour de France; 1968 Peugeot PL8; 1982 Nishiki Marina 12; 1984 Peugeot PSV; 1993 Trek 950 mtb; 1983 Vitus 979; Colnago Super, mid-80's Bianchi Veloce, 1984 or 85 Vitus 979
#6260
Junior Member
Aerotek m4000
Just recabled it, rewrapped the bars, and replaced the brake hoods after 3 1/2 years as my main bike.
I haven't been able to find any information on the make in that time. It's definitely early 90s. Possibly the Aerotek that makes custom titanium bolt kits for motocross bikes made some mountain bikes once?
I found the bare frame on the sidewalk and built it up with a 26" Long Haul Trucker fork and Salsa woodchippers. Started out with bar-end shifters but they were constantly bumping into things due to the flared drops. Eventually switched to Suntour command shifters when I happened across a set.
The brakes and drivetrain I originally scrounged from a stumpjumper FS with lots of purple anodized dongles. I replaced the derailleurs and the purple chainring bolts have faded a lot but the brakes still look good. Now that I look at these pictures I should probably replace those rusty washers and the overlong m6 bolt.
I haven't been able to find any information on the make in that time. It's definitely early 90s. Possibly the Aerotek that makes custom titanium bolt kits for motocross bikes made some mountain bikes once?
I found the bare frame on the sidewalk and built it up with a 26" Long Haul Trucker fork and Salsa woodchippers. Started out with bar-end shifters but they were constantly bumping into things due to the flared drops. Eventually switched to Suntour command shifters when I happened across a set.
The brakes and drivetrain I originally scrounged from a stumpjumper FS with lots of purple anodized dongles. I replaced the derailleurs and the purple chainring bolts have faded a lot but the brakes still look good. Now that I look at these pictures I should probably replace those rusty washers and the overlong m6 bolt.
#6263
Junior Member
Join Date: Jun 2014
Posts: 16
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#6264
Senior Member
Just recabled it, rewrapped the bars, and replaced the brake hoods after 3 1/2 years as my main bike.
I haven't been able to find any information on the make in that time. It's definitely early 90s. Possibly the Aerotek that makes custom titanium bolt kits for motocross bikes made some mountain bikes once?
I found the bare frame on the sidewalk and built it up with a 26" Long Haul Trucker fork and Salsa woodchippers. Started out with bar-end shifters but they were constantly bumping into things due to the flared drops. Eventually switched to Suntour command shifters when I happened across a set.
The brakes and drivetrain I originally scrounged from a stumpjumper FS with lots of purple anodized dongles. I replaced the derailleurs and the purple chainring bolts have faded a lot but the brakes still look good. Now that I look at these pictures I should probably replace those rusty washers and the overlong m6 bolt.
I haven't been able to find any information on the make in that time. It's definitely early 90s. Possibly the Aerotek that makes custom titanium bolt kits for motocross bikes made some mountain bikes once?
I found the bare frame on the sidewalk and built it up with a 26" Long Haul Trucker fork and Salsa woodchippers. Started out with bar-end shifters but they were constantly bumping into things due to the flared drops. Eventually switched to Suntour command shifters when I happened across a set.
The brakes and drivetrain I originally scrounged from a stumpjumper FS with lots of purple anodized dongles. I replaced the derailleurs and the purple chainring bolts have faded a lot but the brakes still look good. Now that I look at these pictures I should probably replace those rusty washers and the overlong m6 bolt.
#6266
Junior Member
It's the Surly 8-pack rack. I'm impressed with how sturdy and well-built it is, and the welds are nicer than on a Soma Champs Élysées rack I had on another bike. At first it bugged me that it was longer than the basket, but it's grown on me. There's definitely utility in having support for something strapped in front of the basket. It doesn't have a light mount, but it was extremely easy to mount a piece of chainring on one of the strut clamps and use that, an idea I got from a Rivendell blog post I can't find right now. Also, it would be easy to double-up with a lowrider rack, in case I ever get around to a longer tour.
#6268
Senior Member
Join Date: Sep 2017
Location: Greenville SC
Posts: 4,127
Bikes: 1975 Motobecane Grand Jubile, 2020 Holdsworth Competition, 2022 Giant Trance 29 3
Mentioned: 42 Post(s)
Tagged: 0 Thread(s)
Quoted: 3359 Post(s)
Liked 3,637 Times
in
1,243 Posts
And since i have the required posts now... Here my Scott Evolution Pro. Tink it's from 1992 or something. Was my Dads first MTB, and he rode it hard. Was used as a city bike and now deserved some love. Had to get it powder coated since the old paint was coming of and it got a bit rusty here and there. Still using the original drive train (XT rear mech,dx front mech, xt cranks,)plus xt ( it think) brakes. Hope you like it.
BTW: I'm running 26x2,4 Conti X-Kings and they fit great. Gonna try a RaceKing 2,2 for a little more speed in the back though.
BTW: I'm running 26x2,4 Conti X-Kings and they fit great. Gonna try a RaceKing 2,2 for a little more speed in the back though.
Really super nice build!
#6271
Senior Member
#6273
Shimano Certified
Pinky, my daily driver version of my XC mtb. Triple wrapped bar tape and retrofitted rear Disc tab.
#6274
Senior Member
simmonsqc
What a beautiful build. Exactly (or close enough) to what I would do EXCEPT sandblasding. Sandblasting can work harden the frame material resulting in micro cracks and fissures. A chemical strip (caustic dip or chemical paint remover) is easier on the frame, but not the enviroment. Crushed walnut shells , peas, beans, etc can be used as a substitute when trying not to work harden a frame set.
Did you find out what the crown style fork was from?
rRgardless a beautiful build.
What a beautiful build. Exactly (or close enough) to what I would do EXCEPT sandblasding. Sandblasting can work harden the frame material resulting in micro cracks and fissures. A chemical strip (caustic dip or chemical paint remover) is easier on the frame, but not the enviroment. Crushed walnut shells , peas, beans, etc can be used as a substitute when trying not to work harden a frame set.
Did you find out what the crown style fork was from?
rRgardless a beautiful build.
Last edited by Nu2Miele; 11-05-18 at 10:27 PM.
#6275
Senior Member
Are yours the 25.4 version? They are getting hard to find, so that would be an excellent snag.