Go Back  Bike Forums > Bike Forums > Framebuilders
Reload this Page >

Head Badge Adhesion

Notices
Framebuilders Thinking about a custom frame? Lugged vs Fillet Brazed. Different Frame materials? Newvex or Pacenti Lugs? why get a custom Road, Mountain, or Track Frame? Got a question about framebuilding? Lets discuss framebuilding at it's finest.

Head Badge Adhesion

Old 07-22-19, 01:06 PM
  #1  
Bugman61
Newbie
Thread Starter
 
Join Date: Jul 2019
Posts: 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Head Badge Adhesion

I have an old Trek 720. It has been repainted but the head badge was just stuck back on. I removed a layer of black goo from the back with the Dremel and was wondering what type of adhesive would be best for sticking it back on.
Bugman61 is offline  
Old 07-22-19, 01:25 PM
  #2  
Andrew R Stewart 
Senior Member
 
Andrew R Stewart's Avatar
 
Join Date: Feb 2012
Location: Rochester, NY
Posts: 12,193

Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Raleigh Pro, Trek Cycle Cross, Mongoose tomac ATB, GT Bravado ATB, JCP Folder

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1940 Post(s)
Liked 131 Times in 99 Posts
What type of paint/clear coat is on the bike? Do you want to be able to remove the badge in the future? Andy
__________________
AndrewRStewart
Andrew R Stewart is offline  
Old 07-22-19, 07:56 PM
  #3  
Nessism
Senior Member
 
Nessism's Avatar
 
Join Date: Jun 2004
Location: Torrance, CA
Posts: 2,778

Bikes: Homebuilt steel

Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 164 Post(s)
Liked 23 Times in 20 Posts
.025" thick 3M VHB tape is what I use.
Nessism is offline  
Old 07-22-19, 08:08 PM
  #4  
jskita
Senior Member
 
Join Date: Jan 2018
Location: Orange County, CA
Posts: 64
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 20 Post(s)
Liked 4 Times in 3 Posts
Basic silicone should work fine. I used it on my Trek 360 and Lotus and I know those badges are going nowhere.
jskita is offline  
Old 07-23-19, 05:13 AM
  #5  
dsaul
Senior Member
 
Join Date: Jan 2013
Posts: 1,207
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 308 Post(s)
Liked 76 Times in 59 Posts
I'll second the 3M VHB tape. I've been using it for years and never had a badge fall off.
dsaul is offline  
Old 07-23-19, 06:09 AM
  #6  
unterhausen
Randomhead
 
Join Date: Aug 2008
Location: Happy Valley, Pennsylvania
Posts: 18,722
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 93 Times in 79 Posts
I swear they used roofing mastic tape on those badges. I was there in the years where they used 2 screws to hold the badges on. Convenient way of telling if it is possible I built a frame.
unterhausen is offline  
Old 07-28-19, 10:30 AM
  #7  
Vintage Schwinn
Senior Member
 
Join Date: Jun 2019
Posts: 134
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 48 Post(s)
Likes: 0
Liked 49 Times in 30 Posts
3M brand Emblem Adhesive

It comes in a tube that is slightly larger than the tubes of Model Airplane Glue from 55 years ago..........don't mistake it for that though, because Emblem Adhesive is what glues the badges, nameplates, letters, etc on to automobiles/trucks/suvs.

There is nothing better in this world for that purpose.
Vintage Schwinn is offline  
Old 07-28-19, 07:38 PM
  #8  
Nessism
Senior Member
 
Nessism's Avatar
 
Join Date: Jun 2004
Location: Torrance, CA
Posts: 2,778

Bikes: Homebuilt steel

Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 164 Post(s)
Liked 23 Times in 20 Posts
Originally Posted by Vintage Schwinn View Post
3M brand Emblem Adhesive

It comes in a tube that is slightly larger than the tubes of Model Airplane Glue from 55 years ago..........don't mistake it for that though, because Emblem Adhesive is what glues the badges, nameplates, letters, etc on to automobiles/trucks/suvs.

There is nothing better in this world for that purpose.
Speaking of 55 years...that's probably the last time any OEM auto company used adhesive to attach badges, nameplates, letting etc. onto a car. Double sided tape is the norm, or some sort of mechanical fastener in certain circumstances.
Nessism is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
smontanaro
Classic & Vintage
17
06-17-17 02:47 PM
cb250rs
Hybrid Bicycles
7
10-11-14 03:47 PM
arex
Bicycle Mechanics
19
04-26-14 04:05 PM
bashermax
Classic & Vintage
25
02-11-14 04:19 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.