Downhill technique: Flairing one's knee
#151
Senior Member
Thread Starter
Join Date: Sep 2012
Location: Los Angeles
Posts: 752
Bikes: 2019 CAAD12, 2015 Specialized Sirrus Comp
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 559 Post(s)
Likes: 0
Liked 63 Times
in
45 Posts
In the picture, it seems like Lemond has shifted his weight to the outside of the turn.
Likes For Robert A:
#152
Senior Member
Join Date: Sep 2015
Posts: 598
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 389 Post(s)
Liked 255 Times
in
165 Posts
Also ^, for those that say you countersteer all the way through a turn, it appears that he is doing the opposite. Perhaps you adjust steering to maintain the same lean angle.
#153
Senior Member
The mistake most people make is assuming that the direction of the tire determines whether countersteering force is being applied. That is not the case. Anyone who has spent much time on a motorcycle knows that countersteering force must be continually applied to keep the bike leaned and turning. If no force is applied the bike will quit turning. The bike's position is maintained by force feedback, not by looking at the front tire direction. If the bike is turning too tight, the countersteering force is reduced, not eliminated. If you want to quit turning, quit applying the countersteering force and it will straighten up all by itself.
Take a motorcycle training course if you really want to understand proper turning technique.
Take a motorcycle training course if you really want to understand proper turning technique.
Likes For DaveSSS:
#154
just another gosling
Join Date: Feb 2007
Location: Everett, WA
Posts: 19,528
Bikes: CoMo Speedster 2003, Trek 5200, CAAD 9, Fred 2004
Mentioned: 115 Post(s)
Tagged: 0 Thread(s)
Quoted: 3885 Post(s)
Liked 1,938 Times
in
1,383 Posts
The mistake most people make is assuming that the direction of the tire determines whether countersteering force is being applied. That is not the case. Anyone who has spent much time on a motorcycle knows that countersteering force must be continually applied to keep the bike leaned and turning. If no force is applied the bike will quit turning. The bike's position is maintained by force feedback, not by looking at the front tire direction. If the bike is turning too tight, the countersteering force is reduced, not eliminated. If you want to quit turning, quit applying the countersteering force and it will straighten up all by itself.
Take a motorcycle training course if you really want to understand proper turning technique.
Take a motorcycle training course if you really want to understand proper turning technique.
__________________
Results matter
Results matter
#155
Senior Member
People keep saying this, but it doesn't get through: motos are not the same as bicycles. If you weighed 10 times what your moto weighed, your supposition would be true. But you don't. I rode my BMW 50,000 miles through Europe and North Africa back in the day when there were no speed limits and now I descend as quick as I can on my bicycle. It's not the same.
One big difference with a motorcycle is the ability to use the large amount of power available to increase or decrease the turn radius. A motorcycle can also apply engine braking to greatly reduce the braking required. You probably never coasted down a steep mountain descent on your motorcycle.
The application of countersteering force on the handlbars follows all of the same principles.
#156
For The Fun of It
Join Date: May 2007
Location: Louisissippi Coast
Posts: 5,845
Bikes: Lynskey GR300, Lynskey Backroad, Litespeed T6, Lynskey MT29, Burley Duet
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 2134 Post(s)
Liked 1,643 Times
in
825 Posts
Video this when you do it. Get into a sweeper doing about 35 mph applying countersteer. Maintaining body position and weight distribution, mid turn remove your inside hand from the bar. This is going to be fun to watch.
#157
Senior Member
Join Date: Mar 2017
Location: Michigan, on the lake, 60 miles WNW of Chicago as the crow flies, or 90 miles if the crow walks.
Posts: 74
Bikes: Dolan DF4, BH Ultralight, 1974 Schwinn Paramount Track, Trek Alpha 1000, Trek 730, Miyata 930 affixed to a Brian Wind Trainer
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 22 Post(s)
Liked 2 Times
in
1 Post
Yes, it shifts your center of gravity. It helps keep the bike upright so you don't run out of tread and have the bike slide out in the turn. Most of my bicycle handling skills I picked up racing motorcycles. Bike handling isn't taught much in the bicycling world.
#158
Senior Member
Join Date: Apr 2012
Location: Nor Cal
Posts: 6,016
Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 1814 Post(s)
Likes: 0
Liked 923 Times
in
569 Posts
This reminds me of a time when I was a kid, and my mother was driving weird.
We said (from the back seat) "What are you doing?" & she replied "I'm practicing accelerating into the turns".
#159
Senior Member
Join Date: Jul 2009
Posts: 5,938
Bikes: Colnago, Van Dessel, Factor, Cervelo, Ritchey
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 3943 Post(s)
Liked 7,286 Times
in
2,942 Posts
There is no doubt you will crash if you maintain the same body position and weight distribution when you let go of the bars.
Likes For Paul Barnard:
#161
Rhapsodic Laviathan
That's automotive or 3+ wheeled counter steering. This is why I don't like the term used for 2wheeled bikes. Leaning the bike in to a turn is counter steering. The bike wants to otherwise counter your counter steer and make you high-side. An easy experiment is walking the bike by the seat and steering the bike with that hand, the bike will want to fall outside the turn because of fork trail and rake, general physics. Same reason delta trikes tip over as well, with enough speed..
#162
Non omnino gravis
That's automotive or 3+ wheeled counter steering. This is why I don't like the term used for 2wheeled bikes. Leaning the bike in to a turn is counter steering. The bike wants to otherwise counter your counter steer and make you high-side. An easy experiment is walking the bike by the seat and steering the bike with that hand, the bike will want to fall outside the turn because of fork trail and rake, general physics. Same reason delta trikes tip over as well, with enough speed..
So it comes down to misapplication of a term; yes, body shifting is kinda like countersteering because we're using body weight to make the bike do the opposite of what it wants to do-- but we're still turning the bars to the right to go right, and vice versa.
There are guys out there countersteering on two wheels, and it's pretty easy to see:
Likes For DrIsotope:
#163
Senior Member
After taking my motorcycle training course, where the first thing taught was to push on the right side to lean the bike to the right and turn right, I gave it a try on my regular 10 mile mountain descent. I made one turn after another only pushing the right side of the bars (turning left) to lean the bike and turn right. To stop the turn, all you do is let up on the pressure. Works just like a motorcycle, except the force required is much less. You can prove this even more emphatically, using an open hand, in the hooks, so you can't turn to the right, unless you cheat and use your left hand.
I remind myself of this on an abrupt right hand corner at the bottom of one hill, where it turns onto a level road. To tighten the turn radius, after you're in the turn, just push some more on the right hand side of the hooks.
I remind myself of this on an abrupt right hand corner at the bottom of one hill, where it turns onto a level road. To tighten the turn radius, after you're in the turn, just push some more on the right hand side of the hooks.
#165
Non omnino gravis
#166
Globo Gym lifetime member
Join Date: Jan 2006
Location: Salem, Oregon
Posts: 5,204
Bikes: Fast ones
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 410 Post(s)
Liked 614 Times
in
306 Posts
I could give you all of the anecdotal evidence to prove you wrong, but this is becoming a flat earth discussion. I could go outside and film myself countersteering in slow motion from the top down and people would still argue against it.
Have a youtube video:
Have a youtube video:
__________________
#167
Non omnino gravis
While I enjoy Minute Physics, you absolutely, under no circumstances, need to countersteer to initiate a turn on a bicycle. Wanna turn right? Aim the wheel that direction. I accept the explanation that countersteering is primarily done with body positioning, because the bike wants to do what it wants to do (stay upright) and we want to go one way or the other. But no one needs to Scandinavian Flick a bicycle. They turn pretty easily. The lean pretty easily too, as the meatbag on top usually weighs 5-10X what the bike weighs, and the CGH is really high.
The whole focus on countersteering is a load of bollocks, because in terms of cycling, it's happening unconsciously. We're all making minute corrections almost constantly just to keep moving in a straight line. But the notion that you have to make an initial exaggerated motion to the left to go right? Idiotic. I refer again to my photo in post 162. Dude is countersteering-- with his body and his hands.
The whole focus on countersteering is a load of bollocks, because in terms of cycling, it's happening unconsciously. We're all making minute corrections almost constantly just to keep moving in a straight line. But the notion that you have to make an initial exaggerated motion to the left to go right? Idiotic. I refer again to my photo in post 162. Dude is countersteering-- with his body and his hands.
#168
Globo Gym lifetime member
Join Date: Jan 2006
Location: Salem, Oregon
Posts: 5,204
Bikes: Fast ones
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 410 Post(s)
Liked 614 Times
in
306 Posts
While I enjoy Minute Physics, you absolutely, under no circumstances, need to countersteer to initiate a turn on a bicycle. Wanna turn right? Aim the wheel that direction. I accept the explanation that countersteering is primarily done with body positioning, because the bike wants to do what it wants to do (stay upright) and we want to go one way or the other. But no one needs to Scandinavian Flick a bicycle. They turn pretty easily. The lean pretty easily too, as the meatbag on top usually weighs 5-10X what the bike weighs, and the CGH is really high.
The whole focus on countersteering is a load of bollocks, because in terms of cycling, it's happening unconsciously. We're all making minute corrections almost constantly just to keep moving in a straight line. But the notion that you have to make an initial exaggerated motion to the left to go right? Idiotic. I refer again to my photo in post 162. Dude is countersteering-- with his body and his hands.
The whole focus on countersteering is a load of bollocks, because in terms of cycling, it's happening unconsciously. We're all making minute corrections almost constantly just to keep moving in a straight line. But the notion that you have to make an initial exaggerated motion to the left to go right? Idiotic. I refer again to my photo in post 162. Dude is countersteering-- with his body and his hands.
...and you're still incorrect.
__________________
#169
Non omnino gravis
Then that makes two of us, as skidding is what a tire does when braking or cornering force exceeds available grip. He is powersliding, because he's producing power in excess of tire grip. At the very least get your terminology straight.
Last edited by BillyD; 03-24-20 at 07:51 PM.
#170
Globo Gym lifetime member
Join Date: Jan 2006
Location: Salem, Oregon
Posts: 5,204
Bikes: Fast ones
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 410 Post(s)
Liked 614 Times
in
306 Posts
Do you powerslide your bicycle often? I've done something like it it while clipping pedals in pro crits. The only thing to prevent the inevitable massive crash is....countersteering.
__________________
Last edited by BillyD; 03-24-20 at 07:53 PM. Reason: Cleanup
#171
Rhapsodic Laviathan
I could give you all of the anecdotal evidence to prove you wrong, but this is becoming a flat earth discussion. I could go outside and film myself countersteering in slow motion from the top down and people would still argue against it.
Have a youtube video:
https://www.youtube.com/watch?v=llRkf1fnNDM
Have a youtube video:
https://www.youtube.com/watch?v=llRkf1fnNDM
#172
Globo Gym lifetime member
Join Date: Jan 2006
Location: Salem, Oregon
Posts: 5,204
Bikes: Fast ones
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 410 Post(s)
Liked 614 Times
in
306 Posts
__________________
#173
Senior Member
Join Date: Feb 2020
Posts: 1,060
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 529 Post(s)
Likes: 0
Liked 255 Times
in
185 Posts
If you look at motorcycle racing, the riders slide their body sideways on the bike, towards the inside of the corner.
If they turned the same corner at the same speed without moving their body sideways, they would need to lean the bike further. This would take it to the point where there is less tire grip on the road, and the bike would probably slide out. In other words, they do it to keep the bike more upright, which results in more tire grip.
Maybe some cyclists also put their knee out to keep their bike more upright, and have more tire grip.
If they turned the same corner at the same speed without moving their body sideways, they would need to lean the bike further. This would take it to the point where there is less tire grip on the road, and the bike would probably slide out. In other words, they do it to keep the bike more upright, which results in more tire grip.
Maybe some cyclists also put their knee out to keep their bike more upright, and have more tire grip.
#174
just another gosling
Join Date: Feb 2007
Location: Everett, WA
Posts: 19,528
Bikes: CoMo Speedster 2003, Trek 5200, CAAD 9, Fred 2004
Mentioned: 115 Post(s)
Tagged: 0 Thread(s)
Quoted: 3885 Post(s)
Liked 1,938 Times
in
1,383 Posts
We took the tandem out on Sunday for another spirited solo ride. I noticed that on the tandem, I do have to apply countersteer all the way around the corner, whereas on my single bike I don't. I think the difference is that I can't muscle the tandem around like I can my light single by shifting my weight.
__________________
Results matter
Results matter
#175
Senior Member
Thread Starter
Join Date: Sep 2012
Location: Los Angeles
Posts: 752
Bikes: 2019 CAAD12, 2015 Specialized Sirrus Comp
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 559 Post(s)
Likes: 0
Liked 63 Times
in
45 Posts
So I've started to get the hang of countersteering in turns. When I apply the technique, my bike sets up and enters the turn much faster than before. It seems to make the frame lean just a bit further in the turn, causing the front wheel to come around a little quicker.
Now, I'm still curious about the flaired knee into the turn. As best as I can figure, it causes the rider to shift the rest his weight a bit to the outside, but I don't know why it matters.
Now, I'm still curious about the flaired knee into the turn. As best as I can figure, it causes the rider to shift the rest his weight a bit to the outside, but I don't know why it matters.