Go Back  Bike Forums > Bike Forums > Framebuilders
Reload this Page >

How to build a lugged steel frame, with pics

Notices
Framebuilders Thinking about a custom frame? Lugged vs Fillet Brazed. Different Frame materials? Newvex or Pacenti Lugs? why get a custom Road, Mountain, or Track Frame? Got a question about framebuilding? Lets discuss framebuilding at it's finest.

How to build a lugged steel frame, with pics

Old 04-16-08, 08:47 PM
  #101  
big john
Senior Member
 
big john's Avatar
 
Join Date: Sep 2005
Location: In the foothills of Los Angeles County
Posts: 25,095
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 8183 Post(s)
Liked 8,839 Times in 4,390 Posts
Originally Posted by voltman
Is it wrong that I'm almost as equally impressed that you're making your own cages as I am about the frame itself?
I don't know, I was pretty impressed by the rack he made for another bike.
big john is offline  
Old 04-16-08, 09:09 PM
  #102  
Fat Boy
Wheelsuck
 
Fat Boy's Avatar
 
Join Date: Jun 2007
Posts: 6,158
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Here's a couple questions.

1. Any reason for using paste flux instead of the in-gas flux?
2. You seem to be using brass instead of silver solder, any reason?
3. Your seat stay work is quite a bit more involved then using caps or plugs, is this just for the visual or is there a structural reason?
4. How did you arrive at your choice of tubeset?

And, by the way, beautiful work.
Fat Boy is offline  
Old 04-17-08, 08:48 AM
  #103  
Cassave
Senior Member
Thread Starter
 
Cassave's Avatar
 
Join Date: Jul 2005
Location: Woodland Hills, Calif.
Posts: 1,671
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 34 Post(s)
Liked 18 Times in 11 Posts
Originally Posted by Fat Boy
Here's a couple questions.

1. Any reason for using paste flux instead of the in-gas flux?
2. You seem to be using brass instead of silver solder, any reason?
3. Your seat stay work is quite a bit more involved then using caps or plugs, is this just for the visual or is there a structural reason?
4. How did you arrive at your choice of tubeset?

And, by the way, beautiful work.
To answer your questions;

1. I don't own a gas-flux unit and can't justify buying one.
2. No, it's silver, 56% AWS Bag7.
3. Visual, it's tougher to do than caps but it stiff and very light.
4. It's cheap, standard sized (I already had lugs I wanted to use) and available.

And thanks.
Cassave is offline  
Old 04-17-08, 08:49 AM
  #104  
Cassave
Senior Member
Thread Starter
 
Cassave's Avatar
 
Join Date: Jul 2005
Location: Woodland Hills, Calif.
Posts: 1,671
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 34 Post(s)
Liked 18 Times in 11 Posts
Originally Posted by voltman
Is it wrong that I'm almost as equally impressed that you're making your own cages as I am about the frame itself?
Don't be impressed.
The cages are easy to build, frames are a bit more involved.
Cassave is offline  
Old 04-17-08, 03:08 PM
  #105  
Mo'Phat
Scum, Freezebag!
 
Mo'Phat's Avatar
 
Join Date: Dec 2005
Location: Poway, CA
Posts: 4,546

Bikes: 2007 Leader 796R w/ 10sp DA and 2005 Jamis Dakar XLT FS MTB

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
: popcorn :

Fascinating! Only thing I ever built was a Team Associated RC-10 back in middle school. That ended badly.


Which is why I will never trust myself on a homemade bike.
Mo'Phat is offline  
Old 04-17-08, 04:03 PM
  #106  
chimivee
powerfully luxurious
 
chimivee's Avatar
 
Join Date: Jul 2004
Location: Orange, CA
Posts: 2,423
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Liked 0 Times in 0 Posts
Originally Posted by Mo'Phat
Only thing I ever built was a Team Associated RC-10 back in middle school. That ended badly.
I built two of those back in middle school. But I think mine ended quite nicely.
__________________
- James
chimivee is offline  
Old 04-17-08, 04:10 PM
  #107  
voltman
It is fantastic.
 
voltman's Avatar
 
Join Date: Aug 2005
Location: The OC
Posts: 7,977

Bikes: 05 Specialized Allez Elite; 06 Fuji Team Pro

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by Mo'Phat
: popcorn :

Fascinating! Only thing I ever built was a Team Associated RC-10 back in middle school. That ended badly.


Which is why I will never trust myself on a homemade bike.
Which part ended badly, the build or the car smacking the side of the cafeteria?
voltman is offline  
Old 04-17-08, 04:11 PM
  #108  
voltman
It is fantastic.
 
voltman's Avatar
 
Join Date: Aug 2005
Location: The OC
Posts: 7,977

Bikes: 05 Specialized Allez Elite; 06 Fuji Team Pro

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by chimivee
I built two of those back in middle school. But I think mine ended quite nicely.
We should build some more.
voltman is offline  
Old 04-17-08, 09:47 PM
  #109  
Fat Boy
Wheelsuck
 
Fat Boy's Avatar
 
Join Date: Jun 2007
Posts: 6,158
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
So I think lugged steel frames are great, but for the money it takes to get one custom made, I think one of these days I'll just have to build one.

I have the Paterek book. It has a lot of good info. Henry James seems like a good resource. It'll be 100 years before I actually get to that point, but if I could build something like the piece of art you've produced I would turn backflips.

Anyway, what geometry did you choose, and how did you go about deciding on that geometry? I've built car frames, and there are very specific reasons and justifications for building things in a certain way. There seems to be very little information on bicycle vehicle dynamics and the geometries seem to be chosen in a very touchy-feely way. I think that some of the motorcycle information would transfer, but I don't really know how much is applicable.

If you've build scores of frames, I'm sure you have your pet theories, but I'm very curious how you approach the problem.
Fat Boy is offline  
Old 04-18-08, 09:39 AM
  #110  
Cassave
Senior Member
Thread Starter
 
Cassave's Avatar
 
Join Date: Jul 2005
Location: Woodland Hills, Calif.
Posts: 1,671
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 34 Post(s)
Liked 18 Times in 11 Posts
Originally Posted by Fat Boy
So I think lugged steel frames are great, but for the money it takes to get one custom made, I think one of these days I'll just have to build one.

I have the Paterek book. It has a lot of good info. Henry James seems like a good resource. It'll be 100 years before I actually get to that point, but if I could build something like the piece of art you've produced I would turn backflips.

Anyway, what geometry did you choose, and how did you go about deciding on that geometry? I've built car frames, and there are very specific reasons and justifications for building things in a certain way. There seems to be very little information on bicycle vehicle dynamics and the geometries seem to be chosen in a very touchy-feely way. I think that some of the motorcycle information would transfer, but I don't really know how much is applicable.

If you've build scores of frames, I'm sure you have your pet theories, but I'm very curious how you approach the problem.
Regarding the frame dimensions and geometry;

Dimensions fall into two groups; sizes and dimensions needed to accomodate the components (wheels, brake and tire clearances etc.) and the lengths and angles related to rider size (toptube and seat tube etc.)
Steering and stabilty is most affected by the trail dimension established by steerer angle and fork rake.
For a lightly loaded road bike I prefer about 58 to 60 mm of trail. That results in a quick steering feel at low speed and very high stability. For heavily loaded (touring, porteur) bikes much less trail is used to
produce lighter steering under the load. A well designed touring bike handles better loaded than unloaded.
Bottom bracket drop has an effect on the perceived stability of the bike, specially when pedaling out of the saddle. 70mm is pretty standard for "sport" road frames. Tourers usually have more drop.

I have built a fair number of frames and several for myself. Over the years I've settled on a design with short front center (BB to front axle), a slightly long chainstay and as I said, about 60mm of trail.
This bike is 58 cm C to T, 57 cm TT length, parallel 73 degree head and seat tubes and 42.5 cm chainstays. 42mm of fork rake gives me just less than 60mm of trail. It sits on a 101 cm wheelbase.
Cassave is offline  
Old 04-21-08, 09:45 AM
  #111  
Cassave
Senior Member
Thread Starter
 
Cassave's Avatar
 
Join Date: Jul 2005
Location: Woodland Hills, Calif.
Posts: 1,671
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 34 Post(s)
Liked 18 Times in 11 Posts
Just about done with this thing.......I added the shifter cable bosses and a set of rack bosses.

Only the studs are stainless, the reinforcement is carbon steel and will be painted.

Another view...

The stainless rack bosses. One boss is extended to double as a chain hanger peg.

Seen here installed on the fixturing to keep them in perfect alignment when I braze them.

Brazing the uppers onto the seat stays.

There, seen in-place and polished. All the brazing is done. Next thing is some additional polishing on the stainless bits, clean it and get it ready for primer and paint. Tonight I'll make a simple bending guide and start the water bottle cages and with any luck I'll shoot the primer on the frame on the weekend.Still gotta figure out a color scheme....

Last edited by Cassave; 12-02-22 at 12:38 PM.
Cassave is offline  
Old 04-23-08, 10:36 AM
  #112  
Cassave
Senior Member
Thread Starter
 
Cassave's Avatar
 
Join Date: Jul 2005
Location: Woodland Hills, Calif.
Posts: 1,671
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 34 Post(s)
Liked 18 Times in 11 Posts
Bottle cages...........I made three, two for this new frame and one to try out on my commuter. Made of 3/32" diameter 302 stainless rod. They weigh what seems like nothing and look pretty nice.

The cages brazed......

Adding the mounting tabs....

One finished and polished, mounted on my commuter. I like it!

Last edited by Cassave; 12-02-22 at 12:41 PM.
Cassave is offline  
Old 04-23-08, 10:50 AM
  #113  
roadfix
hello
 
roadfix's Avatar
 
Join Date: May 2003
Location: Los Angeles
Posts: 18,684
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 190 Post(s)
Liked 109 Times in 48 Posts
The bottle cages look just like the Nittos, except better, since you made them!
roadfix is offline  
Old 04-23-08, 11:05 AM
  #114  
Cassave
Senior Member
Thread Starter
 
Cassave's Avatar
 
Join Date: Jul 2005
Location: Woodland Hills, Calif.
Posts: 1,671
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 34 Post(s)
Liked 18 Times in 11 Posts
Originally Posted by roadfix
The bottle cages look just like the Nittos, except better, since you made them!
They're a blatant ripoff of the Nittos.
I don't know about better, but they were certainly a lot cheaper
Cassave is offline  
Old 04-23-08, 12:46 PM
  #115  
MTBMaven
This is Shangri La
 
MTBMaven's Avatar
 
Join Date: Oct 2006
Location: Pasadena, CA
Posts: 724
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Stunning. I can't wait to see what you cook up for the paint scheme.
MTBMaven is offline  
Old 04-28-08, 10:37 AM
  #116  
Cassave
Senior Member
Thread Starter
 
Cassave's Avatar
 
Join Date: Jul 2005
Location: Woodland Hills, Calif.
Posts: 1,671
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 34 Post(s)
Liked 18 Times in 11 Posts
Ok, almost done; Finally got it painted! But first, the last mechanical operations.

Facing the BB shell to 68mm.

Reaming the headtube for the headset cup and upper race.

Primered with a 2 part epoxy primer by PPG. The masked areas are either stainless of already painted white.

Now in color and de-masked. Lug edges need smoothing then ready for clear coat....

Now decalled and ready for clearcoat.....

Now spayed with the Limco acrylic urethane clearcoat.

bottom bracket area.....So next thing is to be patient while the clear hardens for a few days then I'll install the headset and bottom bracket, in the meantime I have wheels to build.

Last edited by Cassave; 12-02-22 at 12:49 PM.
Cassave is offline  
Old 04-28-08, 10:41 AM
  #117  
Fat Boy
Wheelsuck
 
Fat Boy's Avatar
 
Join Date: Jun 2007
Posts: 6,158
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
I'd comment here, but I'm pretty much speechless.
Fat Boy is offline  
Old 04-28-08, 10:43 AM
  #118  
roadfix
hello
 
roadfix's Avatar
 
Join Date: May 2003
Location: Los Angeles
Posts: 18,684
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 190 Post(s)
Liked 109 Times in 48 Posts
Beautiful work! Nice color too......that blue reminds me of my old Univega Gran Premio.
roadfix is offline  
Old 04-28-08, 01:59 PM
  #119  
big john
Senior Member
 
big john's Avatar
 
Join Date: Sep 2005
Location: In the foothills of Los Angeles County
Posts: 25,095
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 8183 Post(s)
Liked 8,839 Times in 4,390 Posts
Looking forward to seeing it on the road.
big john is offline  
Old 04-28-08, 02:42 PM
  #120  
Cassave
Senior Member
Thread Starter
 
Cassave's Avatar
 
Join Date: Jul 2005
Location: Woodland Hills, Calif.
Posts: 1,671
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 34 Post(s)
Liked 18 Times in 11 Posts
Originally Posted by big john
Looking forward to seeing it on the road.
With any luck that'll be the short ride on Sunday.
Cassave is offline  
Old 04-28-08, 10:58 PM
  #121  
Tiffanie
...
 
Tiffanie's Avatar
 
Join Date: May 2006
Location: Huntington Beach, CA
Posts: 3,513

Bikes: Bianchi San Mateo

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
What a fantastic thread. Beautiful pics, beautiful bike! :thumbsup:
__________________
Tiffanie is offline  
Old 04-28-08, 11:33 PM
  #122  
Indolent58
Queen of France
 
Indolent58's Avatar
 
Join Date: Sep 2004
Location: San Diego, CA
Posts: 3,799

Bikes: Look 565, Trek 2120

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Wow. Excellent work.
Indolent58 is offline  
Old 04-29-08, 02:22 AM
  #123  
Pepper Grinder
Senior Member
 
Join Date: Aug 2007
Posts: 471
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time in 1 Post
That is a superb paint and lug job. The stainless lugs are sweet! What kind of bling-blingin' wheelset do you plan on throwing on that thing?

Needs a serious headbadge. I can't wait to see pics of this build completed.

Wow. If that was my bicycle, I would be so sad if I dinged it. Ever.

Last edited by Pepper Grinder; 04-29-08 at 03:33 AM.
Pepper Grinder is offline  
Old 04-29-08, 08:55 AM
  #124  
Cassave
Senior Member
Thread Starter
 
Cassave's Avatar
 
Join Date: Jul 2005
Location: Woodland Hills, Calif.
Posts: 1,671
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 34 Post(s)
Liked 18 Times in 11 Posts
Originally Posted by Pepper Grinder
That is a superb paint and lug job. The stainless lugs are sweet! What kind of bling-blingin' wheelset do you plan on throwing on that thing?

Needs a serious headbadge. I can't wait to see pics of this build completed.

Wow. If that was my bicycle, I would be so sad if I dinged it. Ever.
Thanks.

Wheels;
I'm building them this evening. Nothing special, Record hubset, Mavic Opens, cross 3 using DT spokes.
They'll last forever.
Cassave is offline  
Old 04-29-08, 02:58 PM
  #125  
Seamus
Senior Member
 
Join Date: Jan 2007
Posts: 345
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Wow. Just wow. And of course you build your own wheels too.

Did you work at Colnago or Bianchi in a previous life?

Jim
Seamus is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.