Complaint about replaceable Presta Valves
#1
Full Member
Thread Starter
Complaint about replaceable Presta Valves
I’ve had bikes with Presta valves for at least 30 years. In the last year, two bikes (one new, one just with new tubes), started getting flats, sometimes slow, sometimes fast. I was never able to find any holes. After a few wasted tubes, I figured out I was loosening (or completely removing) the valve while opening or taking off the cap. I didn’t even know this was possible. Have Presta valves always been removable or is this a new thing? Why would I want to replace a Presta valve? Anyway, I’m loctiting them when I think about it. I’ll let you know how that goes.
#2
Senior Member
Join Date: Jul 2013
Location: Nor-Cal
Posts: 3,767
Bikes: lots
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1958 Post(s)
Liked 2,932 Times
in
1,489 Posts
Do NOT LocTite them. They're replaceable because people damage/break them or they get clogged w/ sealant. Don't overthink this, just check them every now and then. If it were that big of a problem there would be tons of people complaining about it.
Likes For cxwrench:
#3
Forum Moderator
Join Date: Jul 2007
Location: Kalamazoo MI
Posts: 20,650
Bikes: Fuji SL2.1 Carbon Di2 Cannondale Synapse Alloy 4 Trek Checkpoint ALR-5 Viscount Aerospace Pro Colnago Classic Rabobank Schwinn Waterford PMount Raleigh C50 Cromoly Hybrid Legnano Tipo Roma Pista
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 3091 Post(s)
Liked 6,599 Times
in
3,785 Posts
I had a removable presta valve shoot passed my head when I went to pump up my tire. That'll jump start your morning.
__________________
#4
Senior Member
Join Date: Sep 2010
Location: Roswell, GA
Posts: 8,319
Bikes: '93 Trek 750, '92 Schwinn Crisscross, '93 Mongoose Alta
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 1438 Post(s)
Liked 1,092 Times
in
723 Posts
When I worked as a car mechanic learned to turn my face away from the tire while seating or inflating it, and to keep clear when removing valve caps, after such wake-ups.
#5
Senior Member
I’ve had bikes with Presta valves for at least 30 years. In the last year, two bikes (one new, one just with new tubes), started getting flats, sometimes slow, sometimes fast. I was never able to find any holes. After a few wasted tubes, I figured out I was loosening (or completely removing) the valve while opening or taking off the cap. I didn’t even know this was possible. Have Presta valves always been removable or is this a new thing? Why would I want to replace a Presta valve? Anyway, I’m loctiting them when I think about it. I’ll let you know how that goes.
#6
Habitual User
Join Date: Jan 2020
Location: Altadena, CA
Posts: 7,986
Bikes: 2023 Niner RLT 9 RDO, 2018 Trek Procaliber 9.9 RSL, 2018 Storck Fascenario.3 Platinum, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 4946 Post(s)
Liked 8,087 Times
in
3,826 Posts
Don't tighten the top cap down so much. Just get it snug. The air pressure in the tire keeps it closed, the screw is redundancy. If you really tighten the top cap down, you're more likely to loosen the valve stem when you go to open it. Also, screw on pump heads are garbage for a similar reason.
__________________
"Swedish fish. They're protein shaped." - livedarklions
"Swedish fish. They're protein shaped." - livedarklions
Likes For Eric F:
Likes For trailangel:
#9
Senior Member
Join Date: Sep 2020
Location: Eastern Poland
Posts: 744
Bikes: Romet Jubilat x 4, Wigry x 1, Turing x 1
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 194 Post(s)
Liked 204 Times
in
151 Posts
Some of the plastic caps I have had recently for my Woods/Dunlop valves have tended to undo the retainer as I have attempted to just remove the cap.
Of course I would never loctite my Woods valves in because that would prevent me from easily releasing the air, and I keep the caps on to keep the crud from blocking the valves - but if you use Presta valves and never have to remove them then why not loctite them in, but I do worry that it might not solve your problem.
Of course I would never loctite my Woods valves in because that would prevent me from easily releasing the air, and I keep the caps on to keep the crud from blocking the valves - but if you use Presta valves and never have to remove them then why not loctite them in, but I do worry that it might not solve your problem.
#10
Senior Member
Join Date: Dec 2009
Posts: 587
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 94 Post(s)
Liked 151 Times
in
105 Posts
While some may think the plastic caps are not needed I think a bicycle that goes in for a tune up or flat repair should come out with caps as this shows the mechanic pays attention to such details. Some customers would be upset if their bike came back from service without caps.
#11
Senior Member
I've had a few tubes that leaked around the replaceable presta valve and no matter how tight I made it they would still leak very slowly. So, one small dot of blue Loctite on the threads to seal it and all was good.
#12
Senior Member
Join Date: Oct 2013
Location: Mich
Posts: 7,389
Bikes: RSO E-tire dropper fixie brifter
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked 2,971 Times
in
1,918 Posts
A dab of liquid electrical tape works well too & will allow for the valve to be easily removed in the event that the tube needs to be serviced.
__________________
-Oh Hey!
-Oh Hey!
#13
Senior Member
Join Date: Jan 2009
Location: San Diego, CA
Posts: 3,673
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 837 Post(s)
Liked 1,061 Times
in
745 Posts
#14
Sr Member on Sr bikes
I’ve kind of wondered why the Presta valve core is removable to begin with (although not all Presta valve cores are removable). And of course some Schrader cores are removable too. Why? Price-wise, and the trouble...it seems like just replacing the tube would be more prudent if there is a valve problem. On a big car or truck tire...I can see that replacing the valve core would be easier than dismounting and remounting the tire. But with a bicycle tire/tube...what’s the purpose?
Dan
Dan
#15
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,096 Times
in
742 Posts
+1 I had Lezyne "Road Drive" mini-pumps on two bikes for a while. They were small, light, efficient and had a separate hose to protect the valve stem. However, they also had screw on valve heads and efficiently removed the valve core from some tubes when the head was removed. After a couple of frustrating roadside flat repair attempts I gave up on them.
#16
Senior Member
Join Date: Jan 2009
Location: San Diego, CA
Posts: 3,673
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 837 Post(s)
Liked 1,061 Times
in
745 Posts
I’ve kind of wondered why the Presta valve core is removable to begin with (although not all Presta valve cores are removable). And of course some Schrader cores are removable too. Why? Price-wise, and the trouble...it seems like just replacing the tube would be more prudent if there is a valve problem. On a big car or truck tire...I can see that replacing the valve core would be easier than dismounting and remounting the tire. But with a bicycle tire/tube...what’s the purpose?
Dan
Dan
#17
Habitual User
Join Date: Jan 2020
Location: Altadena, CA
Posts: 7,986
Bikes: 2023 Niner RLT 9 RDO, 2018 Trek Procaliber 9.9 RSL, 2018 Storck Fascenario.3 Platinum, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 4946 Post(s)
Liked 8,087 Times
in
3,826 Posts
While some may think the plastic caps are not needed I think a bicycle that goes in for a tune up or flat repair should come out with caps as this shows the mechanic pays attention to such details. Some customers would be upset if their bike came back from service without caps.
__________________
"Swedish fish. They're protein shaped." - livedarklions
"Swedish fish. They're protein shaped." - livedarklions
#18
Senior Member
Join Date: Jul 2013
Location: Nor-Cal
Posts: 3,767
Bikes: lots
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1958 Post(s)
Liked 2,932 Times
in
1,489 Posts
I’ve kind of wondered why the Presta valve core is removable to begin with (although not all Presta valve cores are removable). And of course some Schrader cores are removable too. Why? Price-wise, and the trouble...it seems like just replacing the tube would be more prudent if there is a valve problem. On a big car or truck tire...I can see that replacing the valve core would be easier than dismounting and remounting the tire. But with a bicycle tire/tube...what’s the purpose?
Dan
Dan
Hint: #2
#19
Advocatus Diaboli
Join Date: Feb 2015
Location: Wherever I am
Posts: 8,636
Bikes: Merlin Cyrene, Nashbar steel CX
Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
Quoted: 4735 Post(s)
Liked 1,532 Times
in
1,003 Posts
Get some michelin airstop or aircomps.. none of that worthless threading all down the valve stem, nor removable valves.
#20
Senior Member
Join Date: Sep 2005
Location: Michigan
Posts: 3,706
Bikes: Trek 730 (quad), 720 & 830, Bike Friday NWT, Brompton M36R & M6R, Dahon HAT060 & HT060, ...
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 840 Post(s)
Liked 336 Times
in
251 Posts
I buy only tubes with replaceable valves so that I do not need to toss a tube because of a bad valve. The rubber in the gasket that seals the valve is actually thin and fragile and go bad before the tube goes. Unfortunately the replaceable cores in Schwalbe tubes, made in Vietnam, tended to be recently bad right out of the package - that could be an alternative explanation, instead of the unscrewed cores, for the leaking in the original post. I have better quality cores in standby as a matter of principle, just like spare tubes or bolts .
Likes For RGMN:
#22
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,846
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Mentioned: 106 Post(s)
Tagged: 0 Thread(s)
Quoted: 2338 Post(s)
Liked 2,822 Times
in
1,541 Posts
I learned to deflate the tire before removing the presta valve like most of us the hard way....in this case it shot the valve and my nice new indulgent park valve tool flying, lucky I did not take and eye out. and I had to completely clean the shop to find the tool
though the little plastic jobbies wrenches that come with sealant work, the metal park valve tools is so nice
though the little plastic jobbies wrenches that come with sealant work, the metal park valve tools is so nice
__________________
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Likes For Geepig:
#24
Full Member
Join Date: Dec 2014
Location: New Hampshire
Posts: 488
Bikes: Pinarello Gavia TSX; Bianchi Intenso
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 167 Post(s)
Likes: 0
Liked 92 Times
in
62 Posts
I search for Continental tubes BECAUSE they have the replaceable Presta valves and I can inject sealant. My Michelin and Vittoria tubes do not have replaceable valves. Most of my mid-range sewups also have replaceable valves, useful to me for the same reason, to add sealant.
#25
Let your bike be the tool
Join Date: Jun 2006
Location: NC/SC border
Posts: 939
Bikes: '66 Raleigh Carlton, '70 Ron Cooper, '95 Bianchi CD'I, Zonal Frame with Xenon gruppo, Carbon Frame with Record Gruppo, Columbia Twosome, Terry Classic, Bianchi SX, Gravity SS/FG
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 338 Post(s)
Liked 314 Times
in
194 Posts
I search for Continental tubes BECAUSE they have the replaceable Presta valves and I can inject sealant. My Michelin and Vittoria tubes do not have replaceable valves. Most of my mid-range sewups also have replaceable valves, useful to me for the same reason, to add sealant.
__________________
Never try to teach a pig to sing...
Never try to teach a pig to sing...