View Poll Results: Oldest bike in active service?
Less than 10 years old. Newer is always better!
5
6.02%
10-19 years old. Rim brake heyday is where it's at!
12
14.46%
20-29 years old. Reliving the Lance/Ullrich/Pantani/Riis era!
16
19.28%
30+ years old. Steel is real! Or... who needs indexed shifting?
50
60.24%
Voters: 83. You may not vote on this poll
Oldest bike in active service/rotation?
#1
Senior Member
Thread Starter
Oldest bike in active service/rotation?
I just posted in my other thread about carbon steerers (tl;dr: getting the carbon fork on my Lynskey replaced, riding my Bianchi exclusively for now), and that got me thinking: My Bianchi is a 2004 model that I purchased as a leftover in 2005. She's still running Ultegra 6500 3x9. I replaced her nearly worn-out wheels last fall, and she's gotten nearly 600 miles on her since November. All goes well, I'll be taking her on a short ride this afternoon, and a 50 miler with some people tomorrow. One of them would've been 10yrs old when I bought my Bianchi. For that matter, I've owned the Bianchi for just about half my life (I'm 39).
So my question to the gallery: within the following criteria, what's the oldest bike that you guys are still actively riding?
- Age should be counted from the frame. Model year or date of purchase are both valid
- Substantially similar: most non-wear items are same/similar vintage to the frame when you got it. Fork, derailleurs, crankset, brakes? Understandably, tires/chain/gears/cables/saddle wear down much more quickly, and bars are more personal preference. Just want to exclude "Neo retro" builds that might have a 40yr old frame with Di2 - I'd say that's not substantially similar
- Gets at least ~1 ride per month in season, and maybe at least ~200mi or ~300km each year. In other words, more than the 3mi into town to hang out at the coffee shop, and definitely one that's not just a grocery getter/spin around the park with the kiddos. Doesn't have to be epic, but something that'll break a sweat.
For me, it's obviously my Bianchi. I keep her home when it's likely to be wet, or if I'm doing a bigger/longer descent - brake modulation and slightly fatter tires on the Lynskey make her a more confident descender, but otherwise she's definitely in rotation - if I'm riding 3x in a week, chances are at least one of them will be on the Bianchi (provided it didn't just rain the day before).
So my question to the gallery: within the following criteria, what's the oldest bike that you guys are still actively riding?
- Age should be counted from the frame. Model year or date of purchase are both valid
- Substantially similar: most non-wear items are same/similar vintage to the frame when you got it. Fork, derailleurs, crankset, brakes? Understandably, tires/chain/gears/cables/saddle wear down much more quickly, and bars are more personal preference. Just want to exclude "Neo retro" builds that might have a 40yr old frame with Di2 - I'd say that's not substantially similar
- Gets at least ~1 ride per month in season, and maybe at least ~200mi or ~300km each year. In other words, more than the 3mi into town to hang out at the coffee shop, and definitely one that's not just a grocery getter/spin around the park with the kiddos. Doesn't have to be epic, but something that'll break a sweat.
For me, it's obviously my Bianchi. I keep her home when it's likely to be wet, or if I'm doing a bigger/longer descent - brake modulation and slightly fatter tires on the Lynskey make her a more confident descender, but otherwise she's definitely in rotation - if I'm riding 3x in a week, chances are at least one of them will be on the Bianchi (provided it didn't just rain the day before).
Last edited by aliasfox; 02-23-24 at 10:40 AM.
#2
Sunshine
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,681
Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo
Mentioned: 124 Post(s)
Tagged: 0 Thread(s)
Quoted: 11035 Post(s)
Liked 7,584 Times
in
4,229 Posts
It's a Peugeot from maybe 1973, but not certain. May have been repainted, but not certain.
Single speed and it was ridden almost 200mi last year. It's a very specific use case bike, but fun to use for the short 6-10mi trips that are 1 or 2x/week.
Interesting geometry- the chainstays are like 460mm and the head tube angle is steep, like 74+ deg.
Single speed and it was ridden almost 200mi last year. It's a very specific use case bike, but fun to use for the short 6-10mi trips that are 1 or 2x/week.
Interesting geometry- the chainstays are like 460mm and the head tube angle is steep, like 74+ deg.
#3
Senior Member
Join Date: Mar 2023
Location: NorCal
Posts: 570
Bikes: Santa Cruz Blur 4 TR, Canyon Endurace cf sl, Canyon Ultimate cf slx, Canyon Strive enduro, Canyon Grizl sl8
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 239 Post(s)
Liked 989 Times
in
389 Posts
I do have a 20ish year old Cannondale CAAD5 w/Dura-ace and Saeco team colors, but I rarely ride it. I have a steel frame hanging from my shop ceiling that's 35 years old.
My oldest regularly-ridden bike is my 10 year old Canyon Ultimate. I haven't owned it since new, rather it was a frame I acquired to complement my newer disc-brake Endurace from 2020.
My oldest regularly-ridden bike is my 10 year old Canyon Ultimate. I haven't owned it since new, rather it was a frame I acquired to complement my newer disc-brake Endurace from 2020.
#4
Senior Member
Join Date: Jul 2007
Location: South shore, L.I., NY
Posts: 6,949
Bikes: Flyxii FR322, Cannondale Topstone, Miyata City Liner, Specialized Chisel, Specialized Epic Evo
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 3296 Post(s)
Liked 2,129 Times
in
1,204 Posts
Miyata City Liner, touring bike, (Edit: 1998), it’s my grocery getter and tourer. Well built bike. Has a “Peckham” sticker to honor a cycling friend who built bikes and carved mt bike trails. Passed away a few years ago,
Last edited by Steve B.; 02-23-24 at 04:37 PM.
Likes For Steve B.:
#5
Klaatu..Verata..Necktie?
Join Date: May 2007
Location: SF Bay Area
Posts: 18,122
Bikes: Litespeed Ultimate, Ultegra; Canyon Endurace, 105; Battaglin MAX, Chorus; Bianchi 928 Veloce; Ritchey Road Logic, Dura Ace; Cannondale R500 RX100; Schwinn Circuit, Sante; Lotus Supreme, Dura Ace
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 10504 Post(s)
Liked 12,037 Times
in
6,164 Posts
With all those parameters, it'd have to be "Old Tom", my 1995 Ritchey Road Logic, purchased new as a closeout in 1997 (1/3 off!) because it had 8 speed Dura Ace when the 9 speed had just come out. I had it repainted in 2007, and swapped the 8sp 7400 series STIs and RD for 7800 to give me more and smaller gears in 2019, but otherwise it's substantially the same bike.
__________________
"Don't take life so serious-it ain't nohow permanent."
"Everybody's gotta be somewhere." - Eccles
"Don't take life so serious-it ain't nohow permanent."
"Everybody's gotta be somewhere." - Eccles
#6
Newbie
Join Date: Jun 2008
Location: Oakville, ON, Canada
Posts: 63
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Liked 19 Times
in
10 Posts
I bought this new in the late 80's. It is my cottage bicycle. This bike has Shimano New 600 indexed shifting with 6 gears. For some unknown reason, this is the quietest drivetrain that I have ever encountered. It weighs approximately 22.5 pounds.
The following are all minor notes, no big deal: I have lowered the stem as far as it can go, but it is still too high for me. The bars are thin and not comfortable. I had changed the stock 600 brake levers to some low end levers so I could hide the cables against the bars. No low granny gears, so I suffer on some hills due to a lack of fitness - it is not the bike's fault. The majority of the roads in the area are really rough. I am running 23mm. I think I have enough room for 25mm, once these wear out, or more likely time/rot out. Do you like how I use white electrical tape to hold the pump? Not having two water bottle carriers is about the biggest annoyance.
I have toyed with the idea of purchasing a more modern used bike. I have also contemplated spreading the frame and modernizing the drive train. Both rejected due to costs, and the fact that despite my comments above, I still love riding this bike. The only area that would like to improve is the bar height, bar diameter and hoods. Any ideas?
Also, I am just as slow on this old bicycle as I am on my newer 17.1 pound carbon bike.
The following are all minor notes, no big deal: I have lowered the stem as far as it can go, but it is still too high for me. The bars are thin and not comfortable. I had changed the stock 600 brake levers to some low end levers so I could hide the cables against the bars. No low granny gears, so I suffer on some hills due to a lack of fitness - it is not the bike's fault. The majority of the roads in the area are really rough. I am running 23mm. I think I have enough room for 25mm, once these wear out, or more likely time/rot out. Do you like how I use white electrical tape to hold the pump? Not having two water bottle carriers is about the biggest annoyance.
I have toyed with the idea of purchasing a more modern used bike. I have also contemplated spreading the frame and modernizing the drive train. Both rejected due to costs, and the fact that despite my comments above, I still love riding this bike. The only area that would like to improve is the bar height, bar diameter and hoods. Any ideas?
Also, I am just as slow on this old bicycle as I am on my newer 17.1 pound carbon bike.
#7
Senior Member
Join Date: Oct 2010
Posts: 8,548
Mentioned: 69 Post(s)
Tagged: 0 Thread(s)
Quoted: 3255 Post(s)
Liked 2,545 Times
in
1,523 Posts
A 72 Lejeune that I need to take a pic of. I was thinking the other day, "Maybe I need a gravel bike in case I want to ride some gravel." Then it dawned on me, that bike was made in France in 1972. If there's any bike suited for riding on crappy roads/terrain, that's the one. It's sports 27" x 1 1/4" tires on touring rims. It has fenders, barcons and a triple. I could take the fenders off and stuff bigger tires on it, or 700c and monster tires. I think I'm good to go.
#8
Resident PIA
Join Date: Jul 2004
Location: City of Oaks, NC
Posts: 874
Bikes: Gunnar Roadie, Look 765 Optimum, Spesh Aethos
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 223 Post(s)
Liked 368 Times
in
195 Posts
20 year old Gunnar Roadiie. Still in the rotation for flatter rides but at 72 when to road goes up something else comes out.
.
.
__________________
--
Shad
I knew where I was when I wrote this
I don't know where I am now...
05 Gunnar Roadie Chorus/Record
67'er
--
Shad
I knew where I was when I wrote this
I don't know where I am now...
05 Gunnar Roadie Chorus/Record
67'er
Likes For Shadco:
#9
In the wind
1985 Miyata 1000 with slightly more modern parts.
#10
Full Member
Join Date: Nov 2022
Location: California's capital
Posts: 484
Bikes: Litespeed Firenze, Spot Acme, Specialzed S Works Pro Race, Davidson Stiletto, Colnago Superissimo
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 138 Post(s)
Liked 309 Times
in
179 Posts
Because I brought it back from defunct state a couple years back, my '83 Colnago. I ride it, not frequently, and enjoy it even while observing the fit is not what I recall, I suspect from a compacting back affecting my reach. My newest is half a year old and gets more use. In between are several others filling in that 83-24 span.
Likes For Rick_D:
#11
Senior Member
Join Date: Mar 2010
Posts: 1,681
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1256 Post(s)
Liked 1,344 Times
in
687 Posts
Since the mid-70s, I have purchased a new primary top-tier bike every three years at maximum. However, in the 90s, I put this on hold due to financial constraints from my mortgage, kids, and starting a business. But since then, I plan on continuing this schedule or even upgrading to a more aggressive one until I can no longer ride. I sell the bikes after use and keep them in top condition, so I only need to pay an upgrade fee. Since I usually buy them at wholesale prices, any losses are reasonable. I am due next year for a new endurance bike, I am excited already!
Likes For WaveyGravey:
#13
-------
Join Date: Jul 2020
Location: Tejas
Posts: 12,800
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 9659 Post(s)
Liked 6,366 Times
in
3,506 Posts
My three bikes are 3.5 years, 3.0 years, and .5 years old.
Newer is better.
Newer is better.
Likes For Mojo31:
#14
Senior Member
Join Date: May 2012
Location: Point Reyes Station, California
Posts: 4,540
Bikes: Indeed!
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 1514 Post(s)
Liked 3,489 Times
in
1,139 Posts
1957 Carlton:
Yes, I regularly ride it and a couple of others that are a little younger. I like the disc brakes and brifters on my more modern bikes but I get a lot of pleasure out of riding the older ones too.
Brent
Yes, I regularly ride it and a couple of others that are a little younger. I like the disc brakes and brifters on my more modern bikes but I get a lot of pleasure out of riding the older ones too.
Brent
__________________
"I have a tendency to meander sometimes." B.G.
"I have a tendency to meander sometimes." B.G.
Likes For obrentharris:
#15
Clark W. Griswold
Join Date: Mar 2014
Location: ,location, location
Posts: 13,728
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 4436 Post(s)
Liked 4,085 Times
in
2,723 Posts
Technically it is the Phil Wood bike which the frame is from 1994 and the groupset is mid to late 80s Dura Ace 74xx but it was built more recently so not current tech but I bought it as a frame and build it up with a vintage groupset with modern vintage compatible parts (Phil Wood hubs and B.B., Chris King headset, Nitto Ergo bars, Vittoria Corsa G+ tires...) I am hoping to ride her more this year. I am thinking I want to swap the stem and give myself a little more rise. Obviously going to a MTB stem would be sacrilege but I did build the bike for looks and now I am realizing comfort is more a priority now.
#16
The Wheezing Geezer
Join Date: Oct 2021
Location: Española, NM
Posts: 1,088
Bikes: 1976 Fredo Speciale, Rivendell Clem Smith Jr., Libertas mixte
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 422 Post(s)
Liked 969 Times
in
465 Posts
'76 Fredo Speciale
Seat, stem, bar tape, and cables are newer, as is the powder coating and the triplizer. It gets around.
Saguaro National Park, Tucson, Arizona
Likes For Fredo76:
#17
Pedalin' Erry Day
These days I do the vast majority of my riding on modern bikes, my oldest remaining bike from the 1970's is really just for display at this point and I sold/gave away the rest of my vintage collection already. But I do have a 1993 Giant Allegre that I ride semi-regularly. The parts are not from 1993, but it does have downtube shifters so the ride experience is definitely old fashioned.
Likes For lasauge:
#18
Senior Member
Thread Starter
Wow, lots of bikes from the 70s through 90s, and one from the 50s! Keep ‘em coming!
For those of you with more experience on pre-STI steeds: are there any big differences between bikes from the 50s through the late 80s? I know they were predominantly steel, with non-indexed downtube shifters. At some point rear dropout spacing increased to 130mm, number of gears went up, and (I think) indexed shifting happened just before the shift to shifter/brake combos, but as far as I’m aware, those are all changes that happened in the latter half of the 80s through early 90s. Lugs vs brazing vs welds? Butting? Bottom bracket standards? Or could a 1956 frame be sold in 1976 with few/no changes?
For those of you with more experience on pre-STI steeds: are there any big differences between bikes from the 50s through the late 80s? I know they were predominantly steel, with non-indexed downtube shifters. At some point rear dropout spacing increased to 130mm, number of gears went up, and (I think) indexed shifting happened just before the shift to shifter/brake combos, but as far as I’m aware, those are all changes that happened in the latter half of the 80s through early 90s. Lugs vs brazing vs welds? Butting? Bottom bracket standards? Or could a 1956 frame be sold in 1976 with few/no changes?
#19
Senior Member
Join Date: May 2018
Location: Fargo ND
Posts: 914
Bikes: Time Scylon, Lynskey R350, Ritchey Breakaway, Ritchey Double Switchback, Lynskey Ridgeline, ICAN Fatbike
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 474 Post(s)
Liked 554 Times
in
312 Posts
My winter commuter is about 10 years old. It is a Lynskey Ridgeline that I have made into a ridgid fork drop bar bike.
Disc brakes, check.
Carbon Fiber wheels, check.
Tubeless tires, check.
Fancy modern group set, Ekar so check.
Keeps me riding all winter.
Disc brakes, check.
Carbon Fiber wheels, check.
Tubeless tires, check.
Fancy modern group set, Ekar so check.
Keeps me riding all winter.
#20
Pedalin' Erry Day
Wow, lots of bikes from the 70s through 90s, and one from the 50s! Keep ‘em coming!
For those of you with more experience on pre-STI steeds: are there any big differences between bikes from the 50s through the late 80s? I know they were predominantly steel, with non-indexed downtube shifters. At some point rear dropout spacing increased to 130mm, number of gears went up, and (I think) indexed shifting happened just before the shift to shifter/brake combos, but as far as I’m aware, those are all changes that happened in the latter half of the 80s through early 90s. Lugs vs brazing vs welds? Butting? Bottom bracket standards? Or could a 1956 frame be sold in 1976 with few/no changes?
For those of you with more experience on pre-STI steeds: are there any big differences between bikes from the 50s through the late 80s? I know they were predominantly steel, with non-indexed downtube shifters. At some point rear dropout spacing increased to 130mm, number of gears went up, and (I think) indexed shifting happened just before the shift to shifter/brake combos, but as far as I’m aware, those are all changes that happened in the latter half of the 80s through early 90s. Lugs vs brazing vs welds? Butting? Bottom bracket standards? Or could a 1956 frame be sold in 1976 with few/no changes?
Likes For lasauge:
#21
Banned.
Join Date: Sep 2007
Location: Carlsbad, CA
Posts: 6,434
Bikes: '09 Felt F55, '84 Masi Cran Criterium, (2)'86 Schwinn Pelotons, '86 Look Equippe Hinault, '09 Globe Live 3 (dogtaxi), '94 Greg Lemond, '99 GT Pulse Kinesis
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 389 Post(s)
Liked 270 Times
in
153 Posts
#24
...
Join Date: Oct 2021
Location: Whitestone and Rensselaerville, New York
Posts: 1,541
Bikes: Bicycles? Yup.
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 489 Post(s)
Liked 1,627 Times
in
752 Posts
A couple of thoughts. The stem looks very short, like 60mm. It could be a longer reach would fit better. If that reach is what's comfortable, then I think a quill-threadless adapter and a flipped stem can get the bars lowest and can fit any handlebar out there. Choose the bars first, and get the stem to fit. Since I'm spending your money, Tektro makes brake levers that have a modern hood shape. I think they're very comfy.
#25
Senior Member
Join Date: Oct 2010
Posts: 8,548
Mentioned: 69 Post(s)
Tagged: 0 Thread(s)
Quoted: 3255 Post(s)
Liked 2,545 Times
in
1,523 Posts
Wow, lots of bikes from the 70s through 90s, and one from the 50s! Keep ‘em coming!
For those of you with more experience on pre-STI steeds: are there any big differences between bikes from the 50s through the late 80s? I know they were predominantly steel, with non-indexed downtube shifters. At some point rear dropout spacing increased to 130mm, number of gears went up, and (I think) indexed shifting happened just before the shift to shifter/brake combos, but as far as I’m aware, those are all changes that happened in the latter half of the 80s through early 90s. Lugs vs brazing vs welds? Butting? Bottom bracket standards? Or could a 1956 frame be sold in 1976 with few/no changes?
For those of you with more experience on pre-STI steeds: are there any big differences between bikes from the 50s through the late 80s? I know they were predominantly steel, with non-indexed downtube shifters. At some point rear dropout spacing increased to 130mm, number of gears went up, and (I think) indexed shifting happened just before the shift to shifter/brake combos, but as far as I’m aware, those are all changes that happened in the latter half of the 80s through early 90s. Lugs vs brazing vs welds? Butting? Bottom bracket standards? Or could a 1956 frame be sold in 1976 with few/no changes?
Edit: I forgot about bikes that aren't human powered or assist the user. Even those aren't new. They've been around for generations. They just went by different names like mopeds.
Last edited by seypat; 02-25-24 at 10:10 AM.